[PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support

[dinh.linux@gmail.com (Dinh Nguyen)]

On 10/8/14, 8:02 AM, Chen-Yu Tsai wrote:
> The A80 Optimus Board is was launched with the Allwinner A80 SoC.
> It was jointly developed by Allwinner and Merrii.
> 
> This board has a UART port, a JTAG connector, USB host ports, a USB
> 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash,
> 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone
> jack, IR receiver, and additional GPIO headers.
> 
> This patch adds only basic support.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  arch/arm/boot/dts/Makefile              |  2 +
>  arch/arm/boot/dts/sun9i-a80-optimus.dts | 66 +++++++++++++++++++++++++++++++++
>  2 files changed, 68 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun9i-a80-optimus.dts
> 
[...]
> +
> +/dts-v1/;
> +/include/ "sun9i-a80.dtsi"
> +
> +/ {
> +	model = "Merrii A80 Optimus Board";
> +	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";

"merrii" should be added to vendor-prefixes.txt

Dinh