From mboxrd@z Thu Jan 1 00:00:00 1970 From: tomi.valkeinen@ti.com (Tomi Valkeinen) Date: Wed, 15 Oct 2014 15:24:20 +0300 Subject: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data In-Reply-To: <1413311335-25083-3-git-send-email-balbi@ti.com> References: <1413311335-25083-1-git-send-email-balbi@ti.com> <1413311335-25083-3-git-send-email-balbi@ti.com> Message-ID: <543E6774.8000406@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 14/10/14 21:28, Felipe Balbi wrote: > Caused by a copy & paste error. Note that even with > this bug AM437x SK display still works because GPIO > mux mode is always enabled. It's still wrong to mux > somebody else's pin. > > Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x > isn't used for anything. > > Signed-off-by: Felipe Balbi > --- > arch/arm/boot/dts/am437x-sk-evm.dts | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts > index 859ff3d..681be00 100644 > --- a/arch/arm/boot/dts/am437x-sk-evm.dts > +++ b/arch/arm/boot/dts/am437x-sk-evm.dts > @@ -320,8 +320,7 @@ > > lcd_pins: lcd_pins { > pinctrl-single,pins = < > - /* GPIO 5_8 to select LCD / HDMI */ > - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) > + 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ > >; > }; > }; I didn't verify the offset, but based on the comments this looks fine to me. Acked-by: Tomi Valkeinen Tomi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: OpenPGP digital signature URL: