From: dinguyen@opensource.altera.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node
Date: Fri, 17 Oct 2014 08:37:22 -0500 [thread overview]
Message-ID: <54411B92.1060705@opensource.altera.com> (raw)
In-Reply-To: <54407454.50903@samsung.com>
On 10/16/14, 8:43 PM, Jaehoon Chung wrote:
> Hi, Dinh.
>
> On 10/17/2014 06:03 AM, dinguyen at opensource.altera.com wrote:
>> From: Dinh Nguyen <dinguyen@opensource.altera.com>
>>
>> Without the 3.3V regulator node, the SDMMC driver will give these warnings:
>>
>> dw_mmc ff704000.dwmmc0: No vmmc regulator found
>> dw_mmc ff704000.dwmmc0: No vqmmc regulator found
>>
>> This patch adds the regulator node, and points the SD/MMC to the regulator.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
>> ---
>> arch/arm/boot/dts/socfpga_arria5.dtsi | 11 ++++++++++-
>> arch/arm/boot/dts/socfpga_arria5_socdk.dts | 5 +++++
>> arch/arm/boot/dts/socfpga_cyclone5.dtsi | 9 +++++++++
>> arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 2 ++
>> arch/arm/boot/dts/socfpga_cyclone5_sockit.dts | 5 +++++
>> 5 files changed, 31 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
>> index 03e8268..8093781 100644
>> --- a/arch/arm/boot/dts/socfpga_arria5.dtsi
>> +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
>> @@ -29,7 +29,7 @@
>> };
>> };
>>
>> - dwmmc0 at ff704000 {
>> + mmc0: dwmmc0 at ff704000 {
>> num-slots = <1>;
>> broken-cd;
>> bus-width = <4>;
>> @@ -41,4 +41,13 @@
>> cpu1-start-addr = <0xffd080c4>;
>> };
>> };
>> +
>> + regulator_3_3v_hps: fixed_3_3v_hps_regulator at 0 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "HPS 3.3V";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>
> Always-on is right?
yes, it's always on.
>
>> + };
>> };
>> diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
>> index 27d551c..b7e4023 100644
>> --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
>> +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
>> @@ -68,6 +68,11 @@
>> };
>> };
>>
>> +&mmc0 {
>> + vmmc-supply = <®ulator_3_3v_hps>;
>> + vqmmc-supply = <®ulator_3_3v_hps>;
>> +};
>> +
>> &usb1 {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> index 28c05e7..743bc3b 100644
>> --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> @@ -48,4 +48,13 @@
>> cpu1-start-addr = <0xffd080c4>;
>> };
>> };
>> +
>> + regulator_3_3v_hps: fixed_3_3v_hps_regulator at 0 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "HPS 3.3V";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + };
>> };
>> diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
>> index 739c3b7..e1f56ba 100644
>> --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
>> +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
>> @@ -70,6 +70,8 @@
>>
>> &mmc0 {
>> cd = <&gpio1 18 0>;
>> + vmmc-supply = <®ulator_3_3v_hps>;
>> + vqmmc-supply = <®ulator_3_3v_hps>;
>
> Is vmmc and vqmmc used the common supply?
>
Yes..
Dinh
next prev parent reply other threads:[~2014-10-17 13:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-16 21:03 [PATCH 0/2] ARM: dts: socfpga: fix booting with SD/MMC dinguyen at opensource.altera.com
2014-10-16 21:03 ` [PATCH 1/2] ARM: dts: socfpga: Fix SD card detect dinguyen at opensource.altera.com
2014-10-16 21:03 ` [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node dinguyen at opensource.altera.com
2014-10-17 1:43 ` Jaehoon Chung
2014-10-17 13:37 ` Dinh Nguyen [this message]
2014-10-17 16:57 ` Doug Anderson
2014-10-17 19:19 ` Dinh Nguyen
2014-10-17 19:43 ` Doug Anderson
2014-10-17 20:04 ` Dinh Nguyen
2014-10-17 22:36 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54411B92.1060705@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).