From: varkabhadram@gmail.com (Varka Bhadram)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver
Date: Tue, 21 Oct 2014 11:47:03 +0530 [thread overview]
Message-ID: <5445FA5F.8010407@gmail.com> (raw)
In-Reply-To: <CAPTm99U7ugS3=__4A2HSzhhcUVpP0cPg6E8DRHaNgoS4Kr6vbw@mail.gmail.com>
On 10/21/2014 11:46 AM, Ankit Jindal wrote:
> On 21 October 2014 11:34, Varka Bhadram <varkabhadram@gmail.com> wrote:
>> On 10/21/2014 11:26 AM, Ankit Jindal wrote:
>>> The Applied Micro X-Gene SOC has on-chip QMTM (Queue manager
>>> and Traffic manager) which is hardware based Queue or Ring
>>> manager. This QMTM device can be used in conjunction with
>>> other devices such as DMA Engine, Ethernet, Security Engine,
>>> etc to assign work based on queues or rings.
>>>
>>> This patch allows user space access to X-Gene QMTM device.
>>>
>>> Signed-off-by: Ankit Jindal <ankit.jindal@linaro.org>
>>> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org>
>>
>> (...)
>>
>>
>>> +
>>> +static int qmtm_probe(struct platform_device *pdev)
>>> +{
>>> + struct uio_info *info;
>>> + struct uio_qmtm_dev *qmtm_dev;
>>> + struct resource *csr;
>>> + struct resource *fabric;
>>> + struct resource qpool;
>>> + unsigned int num_queues;
>>> + unsigned int devid;
>>> + phandle qpool_phandle;
>>> + struct device_node *qpool_node;
>>> + int ret;
>>> +
>>> + qmtm_dev = devm_kzalloc(&pdev->dev, sizeof(struct uio_qmtm_dev),
>>> + GFP_KERNEL);
>>> + if (!qmtm_dev)
>>> + return -ENOMEM;
>>> +
>>> + qmtm_dev->info = devm_kzalloc(&pdev->dev, sizeof(*info),
>>> GFP_KERNEL);
>>> + if (!qmtm_dev->info)
>>> + return -ENOMEM;
>>> +
>>> + /* Power on qmtm in case its not done as part of boot-loader */
>>> + qmtm_dev->qmtm_clk = devm_clk_get(&pdev->dev, NULL);
>>> + if (IS_ERR(qmtm_dev->qmtm_clk)) {
>>> + dev_err(&pdev->dev, "Failed to get clock\n");
>>> + ret = PTR_ERR(qmtm_dev->qmtm_clk);
>>> + return ret;
>>> + }
>>> +
>>> + csr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> + if (!csr) {
>>> + ret = -ENODEV;
>>> + dev_err(&pdev->dev, "No QMTM CSR resource specified\n");
>>> + goto out_err;
>>> + }
>>> +
>>
>> This error check is not required. *csr* is checked in
>> devm_ioremap_resource().
> I think its better to do sanity check before calling any function.
It will be the duplication of code for sanity check. This sanity check is happening
with devm_ioremap_resource(). No need to check it explicitly.
>>> + if (!csr->start) {
>>> + ret = -EINVAL;
>>> + dev_err(&pdev->dev, "Invalid CSR resource\n");
>>> + goto out_err;
>>> + }
>>> +
>>> + fabric = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>>> + if (!fabric) {
>>> + ret = -ENODEV;
>>> + dev_err(&pdev->dev, "No QMTM Fabric resource
>>> specified\n");
>>> + goto out_err;
>>> + }
>>> +
>>
>> same
> We do not ioremap this address.
Ok..
--
Regards,
Varka Bhadram.
next prev parent reply other threads:[~2014-10-21 6:17 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 5:56 [PATCH v3 0/6] UIO driver for APM X-Gene QMTM Ankit Jindal
2014-10-21 5:56 ` [PATCH v3 1/6] uio: code style cleanup Ankit Jindal
2014-10-21 5:56 ` [PATCH v3 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions Ankit Jindal
2014-10-21 6:38 ` Kumar Gala
2014-10-31 9:30 ` Ankit Jindal
2014-10-31 13:39 ` Kumar Gala
2014-11-05 12:55 ` Ankit Jindal
2014-11-05 15:09 ` Kumar Gala
2014-11-10 11:53 ` Ankit Jindal
2014-10-31 9:35 ` Russell King - ARM Linux
2014-10-21 5:56 ` [PATCH v3 3/6] Documentation: Update documentation for UIO_MEM_PHYS_CACHE Ankit Jindal
2014-10-21 5:56 ` [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver Ankit Jindal
2014-10-21 6:04 ` Varka Bhadram
2014-10-21 6:16 ` Ankit Jindal
2014-10-21 6:17 ` Varka Bhadram [this message]
2014-10-21 6:23 ` Ankit Jindal
2014-10-21 5:56 ` [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for " Ankit Jindal
2014-10-21 9:14 ` Mark Rutland
2014-10-21 10:05 ` Arnd Bergmann
2014-10-31 10:04 ` Ankit Jindal
2014-10-31 10:09 ` Mark Rutland
2014-10-31 10:15 ` Ankit Jindal
2014-10-21 5:56 ` [PATCH v3 6/6] MAINTAINERS: Add entry for APM " Ankit Jindal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5445FA5F.8010407@gmail.com \
--to=varkabhadram@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).