From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] spi/atmel: improve the system suspend/resume functions implementation
Date: Tue, 21 Oct 2014 19:00:54 +0200 [thread overview]
Message-ID: <54469146.8050402@atmel.com> (raw)
In-Reply-To: <1413863014-1791-1-git-send-email-wenyou.yang@atmel.com>
On 21/10/2014 05:43, Wenyou Yang :
> To make it cleaner, the system suspend/resume directly call
> the runtime suspend/resume functions
> and remove the wapper of CONFIG_PM_RUNTIME, CONFIG_PM_SLEEP.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
It looks very neat. Thanks Wenyou and Kevin!
If needed:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
even if I admit that I tend to put my confidence in you guys for this
enhancement ;-)
Bye,
> ---
> drivers/spi/spi-atmel.c | 61 ++++++++++++++++++++---------------------------
> 1 file changed, 26 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
> index 3f50014..6ed1893 100644
> --- a/drivers/spi/spi-atmel.c
> +++ b/drivers/spi/spi-atmel.c
> @@ -1451,11 +1451,30 @@ static int atmel_spi_remove(struct platform_device *pdev)
> }
>
> #ifdef CONFIG_PM
> -#ifdef CONFIG_PM_SLEEP
> +static int atmel_spi_runtime_suspend(struct device *dev)
> +{
> + struct spi_master *master = dev_get_drvdata(dev);
> + struct atmel_spi *as = spi_master_get_devdata(master);
> +
> + clk_disable_unprepare(as->clk);
> + pinctrl_pm_select_sleep_state(dev);
> +
> + return 0;
> +}
> +
> +static int atmel_spi_runtime_resume(struct device *dev)
> +{
> + struct spi_master *master = dev_get_drvdata(dev);
> + struct atmel_spi *as = spi_master_get_devdata(master);
> +
> + pinctrl_pm_select_default_state(dev);
> +
> + return clk_prepare_enable(as->clk);
> +}
> +
> static int atmel_spi_suspend(struct device *dev)
> {
> - struct spi_master *master = dev_get_drvdata(dev);
> - struct atmel_spi *as = spi_master_get_devdata(master);
> + struct spi_master *master = dev_get_drvdata(dev);
> int ret;
>
> /* Stop the queue running */
> @@ -1465,23 +1484,19 @@ static int atmel_spi_suspend(struct device *dev)
> return ret;
> }
>
> - if (!pm_runtime_suspended(dev)) {
> - clk_disable_unprepare(as->clk);
> - pinctrl_pm_select_sleep_state(dev);
> - }
> + if (!pm_runtime_suspended(dev))
> + atmel_spi_runtime_suspend(dev);
>
> return 0;
> }
>
> static int atmel_spi_resume(struct device *dev)
> {
> - struct spi_master *master = dev_get_drvdata(dev);
> - struct atmel_spi *as = spi_master_get_devdata(master);
> + struct spi_master *master = dev_get_drvdata(dev);
> int ret;
>
> if (!pm_runtime_suspended(dev)) {
> - pinctrl_pm_select_default_state(dev);
> - ret = clk_prepare_enable(as->clk);
> + ret = atmel_spi_runtime_resume(dev);
> if (ret)
> return ret;
> }
> @@ -1493,30 +1508,6 @@ static int atmel_spi_resume(struct device *dev)
>
> return ret;
> }
> -#endif
> -
> -#ifdef CONFIG_PM_RUNTIME
> -static int atmel_spi_runtime_suspend(struct device *dev)
> -{
> - struct spi_master *master = dev_get_drvdata(dev);
> - struct atmel_spi *as = spi_master_get_devdata(master);
> -
> - clk_disable_unprepare(as->clk);
> - pinctrl_pm_select_sleep_state(dev);
> -
> - return 0;
> -}
> -
> -static int atmel_spi_runtime_resume(struct device *dev)
> -{
> - struct spi_master *master = dev_get_drvdata(dev);
> - struct atmel_spi *as = spi_master_get_devdata(master);
> -
> - pinctrl_pm_select_default_state(dev);
> -
> - return clk_prepare_enable(as->clk);
> -}
> -#endif
>
> static const struct dev_pm_ops atmel_spi_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
>
--
Nicolas Ferre
next prev parent reply other threads:[~2014-10-21 17:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 3:43 [PATCH] spi/atmel: improve the system suspend/resume functions implementation Wenyou Yang
2014-10-21 16:55 ` Kevin Hilman
2014-10-21 17:00 ` Nicolas Ferre [this message]
2014-10-21 21:27 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54469146.8050402@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox