From mboxrd@z Thu Jan 1 00:00:00 1970 From: varkabhadram@gmail.com (Varka Bhadram) Date: Wed, 05 Nov 2014 17:05:11 +0530 Subject: [PATCH V2 1/4] can: m_can: update to support CAN FD features In-Reply-To: <1415174326-6623-1-git-send-email-b29396@freescale.com> References: <1415174326-6623-1-git-send-email-b29396@freescale.com> Message-ID: <545A0B6F.8060706@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Dong Aisheng, On 11/05/2014 01:28 PM, Dong Aisheng wrote: > Bosch M_CAN is CAN FD capable device. This patch implements the CAN > FD features include up to 64 bytes payload and bitrate switch function. > 1) Change the Rx FIFO and Tx Buffer to 64 bytes for support CAN FD > up to 64 bytes payload. It's backward compatible with old 8 bytes > normal CAN frame. > 2) Allocate can frame or canfd frame based on EDL bit > 3) Bitrate Switch function is disabled by default and will be enabled > according to CANFD_BRS bit in cf->flags. > > Signed-off-by: Dong Aisheng In these four patches two of them are V1 and other two are V2. Is there any reason..? How will you be able to generate like this by git format-patch..? -- Thanks and Regards, Varka Bhadram.