From: tthayer@opensource.altera.com (Thor Thayer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 1/5] arm: socfpga: Enable L2 Cache ECC on startup.
Date: Fri, 7 Nov 2014 16:09:14 -0600 [thread overview]
Message-ID: <545D430A.100@opensource.altera.com> (raw)
In-Reply-To: <545D27D2.1080305@opensource.altera.com>
Hi Dinh,
On 11/07/2014 02:13 PM, Dinh Nguyen wrote:
> Hi Thor,
>
> On 11/07/2014 10:54 AM, tthayer at opensource.altera.com wrote:
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> This patch enables the ECC for L2 cache on machine
>> startup. The ECC has to be enabled before data is
>> is stored in memory otherwise the ECC will fail on
>> reads.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>> ---
>> v2: Split OCRAM initialization into separate patch.
>>
>> v3/4: No change
>> ---
>> MAINTAINERS | 1 +
>> arch/arm/mach-socfpga/Makefile | 1 +
>> arch/arm/mach-socfpga/l2_cache.c | 44 ++++++++++++++++++++++++++++++++++++++
>> arch/arm/mach-socfpga/l2_cache.h | 28 ++++++++++++++++++++++++
>> arch/arm/mach-socfpga/socfpga.c | 5 ++++-
>> 5 files changed, 78 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/mach-socfpga/l2_cache.c
>> create mode 100644 arch/arm/mach-socfpga/l2_cache.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index ee1bc5b..d0c7752 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -1407,6 +1407,7 @@ ARM/SOCFPGA EDAC SUPPORT
>> M: Thor Thayer <tthayer@opensource.altera.com>
>> S: Maintained
>> F: drivers/edac/altera_edac.
>> +F: arch/arm/mach-socfpga/l2_cache.*
>>
>> ARM/STI ARCHITECTURE
>> M: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
>> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
>> index 6dd7a93..142609e 100644
>> --- a/arch/arm/mach-socfpga/Makefile
>> +++ b/arch/arm/mach-socfpga/Makefile
>> @@ -4,3 +4,4 @@
>>
>> obj-y := socfpga.o
>> obj-$(CONFIG_SMP) += headsmp.o platsmp.o
>> +obj-$(CONFIG_EDAC_ALTERA_L2C) += l2_cache.o
>> diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
>> new file mode 100644
>> index 0000000..8e109f3
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/l2_cache.c
>> @@ -0,0 +1,44 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/clk-provider.h>
> Why clk-provider.h and not io.h?
>> +#include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> +
>> +#include "l2_cache.h"
>> +
>> +void socfpga_init_l2_ecc(void)
>> +{
>> + struct device_node *np;
>> + void __iomem *mapped_l2_edac_addr;
>> +
>> + np = of_find_compatible_node(NULL, NULL, "altr,l2-edac");
>> + if (!np) {
>> + pr_err("SOCFPGA: Unable to find altr,l2-edac in dtb\n");
>> + return;
>> + }
>> +
>> + mapped_l2_edac_addr = of_iomap(np, 0);
>> + if (!mapped_l2_edac_addr) {
>> + pr_err("SOCFPGA: Unable to find L2 ECC mapping in dtb\n");
>> + return;
>> + }
>> +
>> + /* Enable ECC */
>> + writel(0x01, mapped_l2_edac_addr);
>> +
>> + pr_debug("SOCFPGA: Success Initializing L2 cache ECC\n");
>> +}
>> +
> Extra line here...
>
>> diff --git a/arch/arm/mach-socfpga/l2_cache.h b/arch/arm/mach-socfpga/l2_cache.h
>> new file mode 100644
>> index 0000000..58e140d
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/l2_cache.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef MACH_SOCFPGA_L2_CACHE_H
>> +#define MACH_SOCFPGA_L2_CACHE_H
>> +
>> +#ifdef CONFIG_EDAC_ALTERA_L2C
>> +void socfpga_init_l2_ecc(void);
>> +#else
>> +inline void socfpga_init_l2_ecc(void)
>> +{
>> +}
>> +#endif
>> +
>> +#endif /* #ifndef MACH_SOCFPGA_L2_CACHE_H */
>> diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
>> index adbf383..af6413a 100644
>> --- a/arch/arm/mach-socfpga/socfpga.c
>> +++ b/arch/arm/mach-socfpga/socfpga.c
>> @@ -1,5 +1,5 @@
>> /*
>> - * Copyright (C) 2012 Altera Corporation
>> + * Copyright (C) 2012;2014 Altera Corporation
> Should be "2012-2014".
>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> @@ -25,6 +25,8 @@
>> #include <asm/mach/map.h>
>>
>> #include "core.h"
>> +#include "l2_cache.h"
>> +#include "ocram.h"
> Including ocram.h should go into patch 2/5. But I think ocram.h can be
> removed as well if you just use IS_ENABLED().
>
>>
>> void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
>> void __iomem *sys_manager_base_addr;
>> @@ -83,6 +85,7 @@ static void __init socfpga_init_irq(void)
>> {
>> irqchip_init();
>> socfpga_sysmgr_init();
>> + socfpga_init_l2_ecc();
> If you use "if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))", then you can
> remove l2_cache.h.
>
> Dinh
>
>
Yes, this is cleaner. I will make these changes. Thanks!
next prev parent reply other threads:[~2014-11-07 22:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-07 16:54 [PATCHv4 0/5] Add Altera peripheral memories to EDAC framework tthayer at opensource.altera.com
2014-11-07 16:54 ` [PATCHv4 1/5] arm: socfpga: Enable L2 Cache ECC on startup tthayer at opensource.altera.com
2014-11-07 20:13 ` Dinh Nguyen
2014-11-07 22:09 ` Thor Thayer [this message]
2014-11-07 16:54 ` [PATCHv4 2/5] arm: socfpga: Enable OCRAM " tthayer at opensource.altera.com
2014-11-07 20:32 ` Dinh Nguyen
2014-11-07 22:11 ` Thor Thayer
2014-11-07 16:54 ` [PATCHv4 3/5] edac: altera: Remove SDRAM module compile tthayer at opensource.altera.com
2014-11-07 16:54 ` [PATCHv4 4/5] edac: altera: Add Altera L2 Cache and OCRAM EDAC Support tthayer at opensource.altera.com
2014-11-07 16:54 ` [PATCHv4 5/5] arm: dts: Add Altera L2 Cache and OCRAM EDAC tthayer at opensource.altera.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545D430A.100@opensource.altera.com \
--to=tthayer@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).