linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: timo.kokkonen@offcode.fi (Timo Kokkonen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
Date: Wed, 12 Nov 2014 10:20:57 +0200	[thread overview]
Message-ID: <54631869.9070709@offcode.fi> (raw)
In-Reply-To: <1414060846-17306-1-git-send-email-timo.kokkonen@offcode.fi>

Hi,

On 10/23/14 13:40, Timo Kokkonen wrote:
> By default the driver will start a kernel timer which keeps on kicking
> the watchdog HW until user space has opened the watchdog
> device. Usually this is desirable as the watchdog HW is running by
> default and the user space may not have any watchdog daemon running at
> all.
>
> However, on production systems it may be mandatory that also early
> crashes and lockups will lead to a watchdog reset, even if they happen
> before the user space has opened the watchdog device.
>
> To resolve the issue, add a new device tree property
> "atmel,no-early-timer" which will prevent the kernel timer from
> pinging the watchdog HW on behalf of user space. The default is still
> to use kernel timer, but more strict behavior can be enabled via the
> device tree property.
>

Any thoughts on this one? Should I resend this with some more people or 
lists to get someone to comment or review this patch?

Thanks,
-Timo

> Signed-off-by: Timo Kokkonen <timo.kokkonen@offcode.fi>
> ---
>   Documentation/devicetree/bindings/watchdog/atmel-wdt.txt | 4 ++++
>   drivers/watchdog/at91sam9_wdt.c                          | 6 +++++-
>   2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> index f90e294..1b9289e 100644
> --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> @@ -28,6 +28,10 @@ Optional properties:
>   	entering idle state.
>   - atmel,dbg-halt : Should be present if you want to stop the watchdog when
>   	entering debug state.
> +- atmel,no-early-timer : Should be present if you want to let the
> +	watchdog timer to expire even before user space has opened the
> +	device. If not set, a kernel timer will keep on pinging the
> +	watchdog until it is opened.
>
>   Example:
>   	watchdog at fffffd40 {
> diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
> index 489729b..8cac712 100644
> --- a/drivers/watchdog/at91sam9_wdt.c
> +++ b/drivers/watchdog/at91sam9_wdt.c
> @@ -89,6 +89,7 @@ struct at91wdt {
>   	u32 mr_mask;
>   	unsigned long heartbeat;	/* WDT heartbeat in jiffies */
>   	bool nowayout;
> +	bool no_early_timer;
>   	unsigned int irq;
>   };
>
> @@ -122,7 +123,7 @@ static void at91_ping(unsigned long data)
>   {
>   	struct at91wdt *wdt = (struct at91wdt *)data;
>   	if (time_before(jiffies, wdt->next_heartbeat) ||
> -	    !watchdog_active(&wdt->wdd)) {
> +		(!watchdog_active(&wdt->wdd) && !wdt->no_early_timer)) {
>   		at91_wdt_reset(wdt);
>   		mod_timer(&wdt->timer, jiffies + wdt->heartbeat);
>   	} else {
> @@ -316,6 +317,9 @@ static int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt)
>
>   	wdt->mr |= max | ((max - min) << 16);
>
> +	if (of_property_read_bool(np, "atmel,no-early-timer"))
> +		wdt->no_early_timer = 1;
> +
>   	return 0;
>   }
>   #else
>

  reply	other threads:[~2014-11-12  8:20 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-23 10:40 [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot Timo Kokkonen
2014-11-12  8:20 ` Timo Kokkonen [this message]
2014-11-13  9:12   ` Nicolas Ferre
2014-11-14  8:40     ` Timo Kokkonen
2014-11-21 12:23       ` Timo Kokkonen
2014-11-27  6:53         ` Timo Kokkonen
2014-11-27  9:22           ` Nicolas Ferre
2014-11-27 17:23             ` Guenter Roeck
2014-11-27 19:06               ` Boris Brezillon
2014-11-27 19:31                 ` Guenter Roeck
2014-11-28  0:30                   ` Alexandre Belloni
2014-11-28  6:40                   ` Timo Kokkonen
2014-11-27 19:00         ` Boris Brezillon
2014-11-28  6:42           ` Timo Kokkonen
2014-12-05 12:57           ` Timo Kokkonen
2014-12-05 14:12             ` Boris Brezillon
2014-12-05 18:42               ` Timo Kokkonen
2014-12-05 19:02                 ` Guenter Roeck
2014-12-05 20:32                   ` Timo Kokkonen
2014-12-05 21:39                     ` Guenter Roeck
2014-12-06 10:11                       ` Timo Kokkonen
2015-01-13 14:53                         ` Guenter Roeck
2015-01-14  6:09                           ` Timo Kokkonen
2015-02-18 12:57                           ` [PATCHv3 0/2] watchdog: Introduce "early-timeout-sec" property Timo Kokkonen
2015-02-18 12:57                             ` [PATCH 1/2] devicetree: Document generic watchdog properties Timo Kokkonen
2015-02-18 12:57                             ` [PATCH 2/2] at91sam9_wdt: Allow watchdog to reset device at early boot Timo Kokkonen
2015-02-18 13:21                               ` Boris Brezillon
2015-02-18 13:59                               ` Guenter Roeck
2015-02-18 14:17                                 ` Boris Brezillon
2015-02-18 14:50                                   ` Guenter Roeck
2015-02-18 16:00                                     ` Alexandre Belloni
2015-02-18 17:50                                       ` Guenter Roeck
2015-02-18 20:21                                         ` Boris Brezillon
2015-02-19  6:02                                           ` Timo Kokkonen
2015-02-18 21:11                                       ` Rob Herring
2015-02-19  6:14                                         ` Timo Kokkonen
2015-02-20 14:06                                           ` Rob Herring
2015-02-20 16:28                                             ` Guenter Roeck
2015-02-20 19:43                                               ` Boris Brezillon
2015-02-20 20:04                                                 ` Guenter Roeck
2015-02-20  7:48                               ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-20  7:51                                 ` Boris Brezillon
2015-02-20 16:33                                   ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-20 17:16                                     ` Boris Brezillon
2015-02-20 18:06                                       ` Guenter Roeck
2015-02-23  7:29                                         ` Timo Kokkonen
2015-02-23  8:51                                           ` Boris Brezillon
2015-02-23  9:11                                             ` Timo Kokkonen
2015-02-23 16:19                                               ` Guenter Roeck
2015-02-23 17:10                                                 ` Rob Herring
2015-02-23 17:43                                                   ` Guenter Roeck
2015-02-20  8:00                                 ` Timo Kokkonen
2015-02-20 16:09                                 ` Guenter Roeck
2015-02-18 13:16                             ` [PATCHv3 0/2] watchdog: Introduce "early-timeout-sec" property Boris Brezillon
2015-02-18 13:51                               ` Timo Kokkonen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54631869.9070709@offcode.fi \
    --to=timo.kokkonen@offcode.fi \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).