From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] irqchip: armada-370-xp: Initialize per cpu registers when CONFIG_SMP=N
Date: Wed, 12 Nov 2014 11:30:16 +0100 [thread overview]
Message-ID: <546336B8.2070209@free-electrons.com> (raw)
In-Reply-To: <1413985427-20918-3-git-send-email-ezequiel.garcia@free-electrons.com>
Hi Ezequiel,
On 22/10/2014 15:43, Ezequiel Garcia wrote:
> The irqchip driver called armada_xp_mpic_smp_cpu_init() when CONFIG_SMP=Y
> to initialize some per cpu registers. The function is called on each
> CPU by calling it explicitly on the boot CPU and then using a CPU notifier
> for the non boot CPUs.
>
> This commit removes the CONFIG_SMP constrain, so the per cpu registers are
> also initialized when CONFIG_SMP=N, which is the right thing to do.
Sometime I find the diff output provided by git not really easy to read.
But about the change itself:
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Thanks,
Gregory
>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> ---
> drivers/irqchip/irq-armada-370-xp.c | 47 ++++++++++++++++++-------------------
> 1 file changed, 23 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
> index af4e307..de5eb26 100644
> --- a/drivers/irqchip/irq-armada-370-xp.c
> +++ b/drivers/irqchip/irq-armada-370-xp.c
> @@ -285,28 +285,6 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
> return 0;
> }
>
> -#ifdef CONFIG_SMP
> -static void armada_mpic_send_doorbell(const struct cpumask *mask,
> - unsigned int irq)
> -{
> - int cpu;
> - unsigned long map = 0;
> -
> - /* Convert our logical CPU mask into a physical one. */
> - for_each_cpu(cpu, mask)
> - map |= 1 << cpu_logical_map(cpu);
> -
> - /*
> - * Ensure that stores to Normal memory are visible to the
> - * other CPUs before issuing the IPI.
> - */
> - dsb();
> -
> - /* submit softirq */
> - writel((map << 8) | irq, main_int_base +
> - ARMADA_370_XP_SW_TRIG_INT_OFFS);
> -}
> -
> static void armada_xp_mpic_smp_cpu_init(void)
> {
> u32 control;
> @@ -329,6 +307,28 @@ static void armada_xp_mpic_smp_cpu_init(void)
> writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
> }
>
> +#ifdef CONFIG_SMP
> +static void armada_mpic_send_doorbell(const struct cpumask *mask,
> + unsigned int irq)
> +{
> + int cpu;
> + unsigned long map = 0;
> +
> + /* Convert our logical CPU mask into a physical one. */
> + for_each_cpu(cpu, mask)
> + map |= 1 << cpu_logical_map(cpu);
> +
> + /*
> + * Ensure that stores to Normal memory are visible to the
> + * other CPUs before issuing the IPI.
> + */
> + dsb();
> +
> + /* submit softirq */
> + writel((map << 8) | irq, main_int_base +
> + ARMADA_370_XP_SW_TRIG_INT_OFFS);
> +}
> +
> static int armada_xp_mpic_secondary_init(struct notifier_block *nfb,
> unsigned long action, void *hcpu)
> {
> @@ -492,9 +492,8 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
>
> BUG_ON(!armada_370_xp_mpic_domain);
>
> -#ifdef CONFIG_SMP
> + /* Setup for the boot CPU */
> armada_xp_mpic_smp_cpu_init();
> -#endif
>
> armada_370_xp_msi_init(node, main_int_res.start);
>
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2014-11-12 10:30 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-22 13:43 [PATCH 0/7] Armada 375/38x perf support, and a bonus irqchip driver simplification Ezequiel Garcia
2014-10-22 13:43 ` [PATCH 1/7] irqchip: armada-370-xp: Simplify interrupt map, mask and unmask Ezequiel Garcia
2014-10-31 16:36 ` Gregory CLEMENT
2014-11-04 15:11 ` Ezequiel Garcia
2014-11-10 17:09 ` Gregory CLEMENT
2014-10-22 13:43 ` [PATCH 2/7] irqchip: armada-370-xp: Initialize per cpu registers when CONFIG_SMP=N Ezequiel Garcia
2014-11-12 10:30 ` Gregory CLEMENT [this message]
2014-10-22 13:43 ` [PATCH 3/7] irqchip: armada-370-xp: Introduce a is_percpu_irq() helper for readability Ezequiel Garcia
2014-10-22 13:58 ` Mark Rutland
2014-10-22 15:14 ` Ezequiel Garcia
2014-10-22 13:43 ` [PATCH 4/7] irqchip: armada-370-xp: Enable Performance Counter interrupts Ezequiel Garcia
2014-10-22 13:43 ` [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC Ezequiel Garcia
2014-10-22 14:04 ` Mark Rutland
2014-10-22 22:16 ` Ezequiel Garcia
2014-10-23 9:14 ` Thomas Petazzoni
2014-10-23 11:51 ` Ezequiel Garcia
2014-10-23 12:07 ` Thomas Petazzoni
2014-10-23 12:19 ` Ezequiel Garcia
2014-10-23 13:18 ` Mark Rutland
2014-10-31 16:23 ` Ezequiel Garcia
2014-10-23 9:41 ` Mark Rutland
2014-10-22 13:43 ` [PATCH 6/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC Ezequiel Garcia
2014-10-22 14:06 ` Mark Rutland
2014-10-22 22:18 ` Ezequiel Garcia
2014-10-22 13:43 ` [PATCH 7/7] ARM: mvebu: Enable perf support in mvebu_v7_defconfig Ezequiel Garcia
2014-10-22 14:11 ` Mark Rutland
2014-10-22 15:33 ` Ezequiel Garcia
2014-10-22 15:38 ` Mark Rutland
2014-11-09 5:23 ` [PATCH 0/7] Armada 375/38x perf support, and a bonus irqchip driver simplification Jason Cooper
2014-11-09 9:41 ` Thomas Petazzoni
2014-11-09 12:18 ` Ezequiel Garcia
2014-11-09 22:50 ` Jason Cooper
2014-11-23 0:45 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=546336B8.2070209@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).