* [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan
@ 2014-11-14 14:36 Ludovic Desroches
2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Ludovic Desroches @ 2014-11-14 14:36 UTC (permalink / raw)
To: linux-arm-kernel
All boards with a dma controller have DT support so using
dma_request_slave_channel_compat is no more needed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
Sorry for the noise, typo in cc list.
drivers/mmc/host/atmel-mci.c | 20 +-------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index a7b59ba..de2287c 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2272,23 +2272,6 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
mmc_free_host(slot->mmc);
}
-static bool atmci_filter(struct dma_chan *chan, void *pdata)
-{
- struct mci_platform_data *sl_pdata = pdata;
- struct mci_dma_data *sl;
-
- if (!sl_pdata)
- return false;
-
- sl = sl_pdata->dma_slave;
- if (sl && find_slave_dev(sl) == chan->device->dev) {
- chan->private = slave_data_ptr(sl);
- return true;
- } else {
- return false;
- }
-}
-
static bool atmci_configure_dma(struct atmel_mci *host)
{
struct mci_platform_data *pdata;
@@ -2302,8 +2285,7 @@ static bool atmci_configure_dma(struct atmel_mci *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
- &host->pdev->dev, "rxtx");
+ host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
if (!host->dma.chan) {
dev_warn(&host->pdev->dev, "no DMA channel available\n");
return false;
--
2.0.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring
2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches
@ 2014-11-14 14:36 ` Ludovic Desroches
2014-11-14 14:55 ` Nicolas Ferre
2014-11-14 14:46 ` [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Nicolas Ferre
2014-11-19 10:45 ` Ulf Hansson
2 siblings, 1 reply; 6+ messages in thread
From: Ludovic Desroches @ 2014-11-14 14:36 UTC (permalink / raw)
To: linux-arm-kernel
Return probe defer if requesting a dma channel without a dma controller
probed. Using late_initcall is no more needing.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
Sorry for the noise, typo in cc list.
drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index de2287c..caddbbd 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
mmc_free_host(slot->mmc);
}
-static bool atmci_configure_dma(struct atmel_mci *host)
+static int atmci_configure_dma(struct atmel_mci *host)
{
struct mci_platform_data *pdata;
dma_cap_mask_t mask;
+ int ret = 0;
if (host == NULL)
- return false;
+ return -EINVAL;
pdata = host->pdev->dev.platform_data;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
- if (!host->dma.chan) {
- dev_warn(&host->pdev->dev, "no DMA channel available\n");
- return false;
- } else {
- dev_info(&host->pdev->dev,
- "using %s for DMA transfers\n",
- dma_chan_name(host->dma.chan));
-
- host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
- host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.src_maxburst = 1;
- host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
- host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.dst_maxburst = 1;
- host->dma_conf.device_fc = false;
- return true;
+ host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx");
+ if (IS_ERR(host->dma.chan)) {
+ ret = PTR_ERR(host->dma.chan);
+ if (ret != -EPROBE_DEFER)
+ dev_warn(&host->pdev->dev, "no DMA channel available\n");
+ return ret;
}
+
+ dev_info(&host->pdev->dev,
+ "using %s for DMA transfers\n",
+ dma_chan_name(host->dma.chan));
+
+ host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+ host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.src_maxburst = 1;
+ host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+ host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.dst_maxburst = 1;
+ host->dma_conf.device_fc = false;
+ return ret;
}
/*
@@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev)
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (atmci_configure_dma(host)) {
+ ret = atmci_configure_dma(host);
+ if (ret == -EPROBE_DEFER)
+ goto err_dma_probe_defer;
+ if (ret == 0) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
@@ -2506,6 +2512,7 @@ err_init_slot:
del_timer_sync(&host->timer);
if (host->dma.chan)
dma_release_channel(host->dma.chan);
+err_dma_probe_defer:
free_irq(irq, host);
return ret;
}
@@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = {
};
static struct platform_driver atmci_driver = {
+ .probe = atmci_probe,
.remove = __exit_p(atmci_remove),
.driver = {
.name = "atmel_mci",
@@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = {
static int __init atmci_init(void)
{
- return platform_driver_probe(&atmci_driver, atmci_probe);
+ return platform_driver_register(&atmci_driver);
}
static void __exit atmci_exit(void)
@@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void)
platform_driver_unregister(&atmci_driver);
}
-late_initcall(atmci_init); /* try to load after dma driver when built-in */
+subsys_initcall(atmci_init);
module_exit(atmci_exit);
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
--
2.0.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan
2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches
2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches
@ 2014-11-14 14:46 ` Nicolas Ferre
2014-11-19 10:45 ` Ulf Hansson
2 siblings, 0 replies; 6+ messages in thread
From: Nicolas Ferre @ 2014-11-14 14:46 UTC (permalink / raw)
To: linux-arm-kernel
On 14/11/2014 15:36, Ludovic Desroches :
> All boards with a dma controller have DT support so using
> dma_request_slave_channel_compat is no more needed.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Yes, sure.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>
> Sorry for the noise, typo in cc list.
>
> drivers/mmc/host/atmel-mci.c | 20 +-------------------
> 1 file changed, 1 insertion(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index a7b59ba..de2287c 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -2272,23 +2272,6 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
> mmc_free_host(slot->mmc);
> }
>
> -static bool atmci_filter(struct dma_chan *chan, void *pdata)
> -{
> - struct mci_platform_data *sl_pdata = pdata;
> - struct mci_dma_data *sl;
> -
> - if (!sl_pdata)
> - return false;
> -
> - sl = sl_pdata->dma_slave;
> - if (sl && find_slave_dev(sl) == chan->device->dev) {
> - chan->private = slave_data_ptr(sl);
> - return true;
> - } else {
> - return false;
> - }
> -}
> -
> static bool atmci_configure_dma(struct atmel_mci *host)
> {
> struct mci_platform_data *pdata;
> @@ -2302,8 +2285,7 @@ static bool atmci_configure_dma(struct atmel_mci *host)
> dma_cap_zero(mask);
> dma_cap_set(DMA_SLAVE, mask);
>
> - host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
> - &host->pdev->dev, "rxtx");
> + host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
> if (!host->dma.chan) {
> dev_warn(&host->pdev->dev, "no DMA channel available\n");
> return false;
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring
2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches
@ 2014-11-14 14:55 ` Nicolas Ferre
2014-11-14 15:14 ` Ludovic Desroches
0 siblings, 1 reply; 6+ messages in thread
From: Nicolas Ferre @ 2014-11-14 14:55 UTC (permalink / raw)
To: linux-arm-kernel
On 14/11/2014 15:36, Ludovic Desroches :
> Return probe defer if requesting a dma channel without a dma controller
> probed. Using late_initcall is no more needing.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> ---
>
> Sorry for the noise, typo in cc list.
>
> drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++-------------------
> 1 file changed, 30 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index de2287c..caddbbd 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
> mmc_free_host(slot->mmc);
> }
>
> -static bool atmci_configure_dma(struct atmel_mci *host)
> +static int atmci_configure_dma(struct atmel_mci *host)
> {
> struct mci_platform_data *pdata;
> dma_cap_mask_t mask;
> + int ret = 0;
>
> if (host == NULL)
> - return false;
> + return -EINVAL;
>
> pdata = host->pdev->dev.platform_data;
>
> dma_cap_zero(mask);
> dma_cap_set(DMA_SLAVE, mask);
>
> - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
> - if (!host->dma.chan) {
> - dev_warn(&host->pdev->dev, "no DMA channel available\n");
> - return false;
> - } else {
> - dev_info(&host->pdev->dev,
> - "using %s for DMA transfers\n",
> - dma_chan_name(host->dma.chan));
> -
> - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
> - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> - host->dma_conf.src_maxburst = 1;
> - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
> - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> - host->dma_conf.dst_maxburst = 1;
> - host->dma_conf.device_fc = false;
> - return true;
> + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx");
> + if (IS_ERR(host->dma.chan)) {
> + ret = PTR_ERR(host->dma.chan);
> + if (ret != -EPROBE_DEFER)
> + dev_warn(&host->pdev->dev, "no DMA channel available\n");
> + return ret;
> }
> +
> + dev_info(&host->pdev->dev,
> + "using %s for DMA transfers\n",
> + dma_chan_name(host->dma.chan));
> +
> + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
> + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> + host->dma_conf.src_maxburst = 1;
> + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
> + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> + host->dma_conf.dst_maxburst = 1;
> + host->dma_conf.device_fc = false;
> + return ret;
> }
>
> /*
> @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev)
>
> /* Get MCI capabilities and set operations according to it */
> atmci_get_cap(host);
> - if (atmci_configure_dma(host)) {
> + ret = atmci_configure_dma(host);
> + if (ret == -EPROBE_DEFER)
> + goto err_dma_probe_defer;
> + if (ret == 0) {
> host->prepare_data = &atmci_prepare_data_dma;
> host->submit_data = &atmci_submit_data_dma;
> host->stop_transfer = &atmci_stop_transfer_dma;
> @@ -2506,6 +2512,7 @@ err_init_slot:
> del_timer_sync(&host->timer);
> if (host->dma.chan)
> dma_release_channel(host->dma.chan);
> +err_dma_probe_defer:
> free_irq(irq, host);
> return ret;
> }
> @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = {
> };
>
> static struct platform_driver atmci_driver = {
> + .probe = atmci_probe,
> .remove = __exit_p(atmci_remove),
> .driver = {
> .name = "atmel_mci",
> @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = {
>
> static int __init atmci_init(void)
> {
> - return platform_driver_probe(&atmci_driver, atmci_probe);
> + return platform_driver_register(&atmci_driver);
> }
>
> static void __exit atmci_exit(void)
> @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void)
> platform_driver_unregister(&atmci_driver);
> }
>
> -late_initcall(atmci_init); /* try to load after dma driver when built-in */
> +subsys_initcall(atmci_init);
If deferring probe is activated, so I don't know why a special initcall
function is still needed.
> module_exit(atmci_exit);
>
> MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring
2014-11-14 14:55 ` Nicolas Ferre
@ 2014-11-14 15:14 ` Ludovic Desroches
0 siblings, 0 replies; 6+ messages in thread
From: Ludovic Desroches @ 2014-11-14 15:14 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Nov 14, 2014 at 03:55:13PM +0100, Nicolas Ferre wrote:
> On 14/11/2014 15:36, Ludovic Desroches :
> > Return probe defer if requesting a dma channel without a dma controller
> > probed. Using late_initcall is no more needing.
> >
> > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
> > ---
> >
> > Sorry for the noise, typo in cc list.
> >
> > drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++-------------------
> > 1 file changed, 30 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> > index de2287c..caddbbd 100644
> > --- a/drivers/mmc/host/atmel-mci.c
> > +++ b/drivers/mmc/host/atmel-mci.c
> > @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
> > mmc_free_host(slot->mmc);
> > }
> >
> > -static bool atmci_configure_dma(struct atmel_mci *host)
> > +static int atmci_configure_dma(struct atmel_mci *host)
> > {
> > struct mci_platform_data *pdata;
> > dma_cap_mask_t mask;
> > + int ret = 0;
> >
> > if (host == NULL)
> > - return false;
> > + return -EINVAL;
> >
> > pdata = host->pdev->dev.platform_data;
> >
> > dma_cap_zero(mask);
> > dma_cap_set(DMA_SLAVE, mask);
> >
> > - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
> > - if (!host->dma.chan) {
> > - dev_warn(&host->pdev->dev, "no DMA channel available\n");
> > - return false;
> > - } else {
> > - dev_info(&host->pdev->dev,
> > - "using %s for DMA transfers\n",
> > - dma_chan_name(host->dma.chan));
> > -
> > - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
> > - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> > - host->dma_conf.src_maxburst = 1;
> > - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
> > - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> > - host->dma_conf.dst_maxburst = 1;
> > - host->dma_conf.device_fc = false;
> > - return true;
> > + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx");
> > + if (IS_ERR(host->dma.chan)) {
> > + ret = PTR_ERR(host->dma.chan);
> > + if (ret != -EPROBE_DEFER)
> > + dev_warn(&host->pdev->dev, "no DMA channel available\n");
> > + return ret;
> > }
> > +
> > + dev_info(&host->pdev->dev,
> > + "using %s for DMA transfers\n",
> > + dma_chan_name(host->dma.chan));
> > +
> > + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
> > + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> > + host->dma_conf.src_maxburst = 1;
> > + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
> > + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> > + host->dma_conf.dst_maxburst = 1;
> > + host->dma_conf.device_fc = false;
> > + return ret;
> > }
> >
> > /*
> > @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev)
> >
> > /* Get MCI capabilities and set operations according to it */
> > atmci_get_cap(host);
> > - if (atmci_configure_dma(host)) {
> > + ret = atmci_configure_dma(host);
> > + if (ret == -EPROBE_DEFER)
> > + goto err_dma_probe_defer;
> > + if (ret == 0) {
> > host->prepare_data = &atmci_prepare_data_dma;
> > host->submit_data = &atmci_submit_data_dma;
> > host->stop_transfer = &atmci_stop_transfer_dma;
> > @@ -2506,6 +2512,7 @@ err_init_slot:
> > del_timer_sync(&host->timer);
> > if (host->dma.chan)
> > dma_release_channel(host->dma.chan);
> > +err_dma_probe_defer:
> > free_irq(irq, host);
> > return ret;
> > }
> > @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = {
> > };
> >
> > static struct platform_driver atmci_driver = {
> > + .probe = atmci_probe,
> > .remove = __exit_p(atmci_remove),
> > .driver = {
> > .name = "atmel_mci",
> > @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = {
> >
> > static int __init atmci_init(void)
> > {
> > - return platform_driver_probe(&atmci_driver, atmci_probe);
> > + return platform_driver_register(&atmci_driver);
> > }
> >
> > static void __exit atmci_exit(void)
> > @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void)
> > platform_driver_unregister(&atmci_driver);
> > }
> >
> > -late_initcall(atmci_init); /* try to load after dma driver when built-in */
> > +subsys_initcall(atmci_init);
>
> If deferring probe is activated, so I don't know why a special initcall
> function is still needed.
>
Right, initcall is still a constraint I can remove, I'll replace it with
module_platform_driver().
> > module_exit(atmci_exit);
> >
> > MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
> >
Ludovic
^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan
2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches
2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches
2014-11-14 14:46 ` [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Nicolas Ferre
@ 2014-11-19 10:45 ` Ulf Hansson
2 siblings, 0 replies; 6+ messages in thread
From: Ulf Hansson @ 2014-11-19 10:45 UTC (permalink / raw)
To: linux-arm-kernel
On 14 November 2014 15:36, Ludovic Desroches
<ludovic.desroches@atmel.com> wrote:
> All boards with a dma controller have DT support so using
> dma_request_slave_channel_compat is no more needed.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Thanks! Applied for next.
Kind regards
Uffe
> ---
>
> Sorry for the noise, typo in cc list.
>
> drivers/mmc/host/atmel-mci.c | 20 +-------------------
> 1 file changed, 1 insertion(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
> index a7b59ba..de2287c 100644
> --- a/drivers/mmc/host/atmel-mci.c
> +++ b/drivers/mmc/host/atmel-mci.c
> @@ -2272,23 +2272,6 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
> mmc_free_host(slot->mmc);
> }
>
> -static bool atmci_filter(struct dma_chan *chan, void *pdata)
> -{
> - struct mci_platform_data *sl_pdata = pdata;
> - struct mci_dma_data *sl;
> -
> - if (!sl_pdata)
> - return false;
> -
> - sl = sl_pdata->dma_slave;
> - if (sl && find_slave_dev(sl) == chan->device->dev) {
> - chan->private = slave_data_ptr(sl);
> - return true;
> - } else {
> - return false;
> - }
> -}
> -
> static bool atmci_configure_dma(struct atmel_mci *host)
> {
> struct mci_platform_data *pdata;
> @@ -2302,8 +2285,7 @@ static bool atmci_configure_dma(struct atmel_mci *host)
> dma_cap_zero(mask);
> dma_cap_set(DMA_SLAVE, mask);
>
> - host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
> - &host->pdev->dev, "rxtx");
> + host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
> if (!host->dma.chan) {
> dev_warn(&host->pdev->dev, "no DMA channel available\n");
> return false;
> --
> 2.0.3
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-11-19 10:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches
2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches
2014-11-14 14:55 ` Nicolas Ferre
2014-11-14 15:14 ` Ludovic Desroches
2014-11-14 14:46 ` [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Nicolas Ferre
2014-11-19 10:45 ` Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).