* [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan
@ 2014-11-14 14:36 Ludovic Desroches
2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Ludovic Desroches @ 2014-11-14 14:36 UTC (permalink / raw)
To: linux-arm-kernel
All boards with a dma controller have DT support so using
dma_request_slave_channel_compat is no more needed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
---
Sorry for the noise, typo in cc list.
drivers/mmc/host/atmel-mci.c | 20 +-------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index a7b59ba..de2287c 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2272,23 +2272,6 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
mmc_free_host(slot->mmc);
}
-static bool atmci_filter(struct dma_chan *chan, void *pdata)
-{
- struct mci_platform_data *sl_pdata = pdata;
- struct mci_dma_data *sl;
-
- if (!sl_pdata)
- return false;
-
- sl = sl_pdata->dma_slave;
- if (sl && find_slave_dev(sl) == chan->device->dev) {
- chan->private = slave_data_ptr(sl);
- return true;
- } else {
- return false;
- }
-}
-
static bool atmci_configure_dma(struct atmel_mci *host)
{
struct mci_platform_data *pdata;
@@ -2302,8 +2285,7 @@ static bool atmci_configure_dma(struct atmel_mci *host)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
- &host->pdev->dev, "rxtx");
+ host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx");
if (!host->dma.chan) {
dev_warn(&host->pdev->dev, "no DMA channel available\n");
return false;
--
2.0.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring 2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches @ 2014-11-14 14:36 ` Ludovic Desroches 2014-11-14 14:55 ` Nicolas Ferre 2014-11-14 14:46 ` [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Nicolas Ferre 2014-11-19 10:45 ` Ulf Hansson 2 siblings, 1 reply; 6+ messages in thread From: Ludovic Desroches @ 2014-11-14 14:36 UTC (permalink / raw) To: linux-arm-kernel Return probe defer if requesting a dma channel without a dma controller probed. Using late_initcall is no more needing. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- Sorry for the noise, typo in cc list. drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 22 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index de2287c..caddbbd 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -static bool atmci_configure_dma(struct atmel_mci *host) +static int atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; dma_cap_mask_t mask; + int ret = 0; if (host == NULL) - return false; + return -EINVAL; pdata = host->pdev->dev.platform_data; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); - if (!host->dma.chan) { - dev_warn(&host->pdev->dev, "no DMA channel available\n"); - return false; - } else { - dev_info(&host->pdev->dev, - "using %s for DMA transfers\n", - dma_chan_name(host->dma.chan)); - - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_conf.src_maxburst = 1; - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - host->dma_conf.dst_maxburst = 1; - host->dma_conf.device_fc = false; - return true; + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); + if (IS_ERR(host->dma.chan)) { + ret = PTR_ERR(host->dma.chan); + if (ret != -EPROBE_DEFER) + dev_warn(&host->pdev->dev, "no DMA channel available\n"); + return ret; } + + dev_info(&host->pdev->dev, + "using %s for DMA transfers\n", + dma_chan_name(host->dma.chan)); + + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.src_maxburst = 1; + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_conf.dst_maxburst = 1; + host->dma_conf.device_fc = false; + return ret; } /* @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev) /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); - if (atmci_configure_dma(host)) { + ret = atmci_configure_dma(host); + if (ret == -EPROBE_DEFER) + goto err_dma_probe_defer; + if (ret == 0) { host->prepare_data = &atmci_prepare_data_dma; host->submit_data = &atmci_submit_data_dma; host->stop_transfer = &atmci_stop_transfer_dma; @@ -2506,6 +2512,7 @@ err_init_slot: del_timer_sync(&host->timer); if (host->dma.chan) dma_release_channel(host->dma.chan); +err_dma_probe_defer: free_irq(irq, host); return ret; } @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = { }; static struct platform_driver atmci_driver = { + .probe = atmci_probe, .remove = __exit_p(atmci_remove), .driver = { .name = "atmel_mci", @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = { static int __init atmci_init(void) { - return platform_driver_probe(&atmci_driver, atmci_probe); + return platform_driver_register(&atmci_driver); } static void __exit atmci_exit(void) @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void) platform_driver_unregister(&atmci_driver); } -late_initcall(atmci_init); /* try to load after dma driver when built-in */ +subsys_initcall(atmci_init); module_exit(atmci_exit); MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); -- 2.0.3 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring 2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches @ 2014-11-14 14:55 ` Nicolas Ferre 2014-11-14 15:14 ` Ludovic Desroches 0 siblings, 1 reply; 6+ messages in thread From: Nicolas Ferre @ 2014-11-14 14:55 UTC (permalink / raw) To: linux-arm-kernel On 14/11/2014 15:36, Ludovic Desroches : > Return probe defer if requesting a dma channel without a dma controller > probed. Using late_initcall is no more needing. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > --- > > Sorry for the noise, typo in cc list. > > drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++------------------- > 1 file changed, 30 insertions(+), 22 deletions(-) > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > index de2287c..caddbbd 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, > mmc_free_host(slot->mmc); > } > > -static bool atmci_configure_dma(struct atmel_mci *host) > +static int atmci_configure_dma(struct atmel_mci *host) > { > struct mci_platform_data *pdata; > dma_cap_mask_t mask; > + int ret = 0; > > if (host == NULL) > - return false; > + return -EINVAL; > > pdata = host->pdev->dev.platform_data; > > dma_cap_zero(mask); > dma_cap_set(DMA_SLAVE, mask); > > - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); > - if (!host->dma.chan) { > - dev_warn(&host->pdev->dev, "no DMA channel available\n"); > - return false; > - } else { > - dev_info(&host->pdev->dev, > - "using %s for DMA transfers\n", > - dma_chan_name(host->dma.chan)); > - > - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > - host->dma_conf.src_maxburst = 1; > - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > - host->dma_conf.dst_maxburst = 1; > - host->dma_conf.device_fc = false; > - return true; > + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); > + if (IS_ERR(host->dma.chan)) { > + ret = PTR_ERR(host->dma.chan); > + if (ret != -EPROBE_DEFER) > + dev_warn(&host->pdev->dev, "no DMA channel available\n"); > + return ret; > } > + > + dev_info(&host->pdev->dev, > + "using %s for DMA transfers\n", > + dma_chan_name(host->dma.chan)); > + > + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + host->dma_conf.src_maxburst = 1; > + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > + host->dma_conf.dst_maxburst = 1; > + host->dma_conf.device_fc = false; > + return ret; > } > > /* > @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev) > > /* Get MCI capabilities and set operations according to it */ > atmci_get_cap(host); > - if (atmci_configure_dma(host)) { > + ret = atmci_configure_dma(host); > + if (ret == -EPROBE_DEFER) > + goto err_dma_probe_defer; > + if (ret == 0) { > host->prepare_data = &atmci_prepare_data_dma; > host->submit_data = &atmci_submit_data_dma; > host->stop_transfer = &atmci_stop_transfer_dma; > @@ -2506,6 +2512,7 @@ err_init_slot: > del_timer_sync(&host->timer); > if (host->dma.chan) > dma_release_channel(host->dma.chan); > +err_dma_probe_defer: > free_irq(irq, host); > return ret; > } > @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = { > }; > > static struct platform_driver atmci_driver = { > + .probe = atmci_probe, > .remove = __exit_p(atmci_remove), > .driver = { > .name = "atmel_mci", > @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = { > > static int __init atmci_init(void) > { > - return platform_driver_probe(&atmci_driver, atmci_probe); > + return platform_driver_register(&atmci_driver); > } > > static void __exit atmci_exit(void) > @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void) > platform_driver_unregister(&atmci_driver); > } > > -late_initcall(atmci_init); /* try to load after dma driver when built-in */ > +subsys_initcall(atmci_init); If deferring probe is activated, so I don't know why a special initcall function is still needed. > module_exit(atmci_exit); > > MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring 2014-11-14 14:55 ` Nicolas Ferre @ 2014-11-14 15:14 ` Ludovic Desroches 0 siblings, 0 replies; 6+ messages in thread From: Ludovic Desroches @ 2014-11-14 15:14 UTC (permalink / raw) To: linux-arm-kernel On Fri, Nov 14, 2014 at 03:55:13PM +0100, Nicolas Ferre wrote: > On 14/11/2014 15:36, Ludovic Desroches : > > Return probe defer if requesting a dma channel without a dma controller > > probed. Using late_initcall is no more needing. > > > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> > > --- > > > > Sorry for the noise, typo in cc list. > > > > drivers/mmc/host/atmel-mci.c | 52 +++++++++++++++++++++++++------------------- > > 1 file changed, 30 insertions(+), 22 deletions(-) > > > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > > index de2287c..caddbbd 100644 > > --- a/drivers/mmc/host/atmel-mci.c > > +++ b/drivers/mmc/host/atmel-mci.c > > @@ -2272,37 +2272,40 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, > > mmc_free_host(slot->mmc); > > } > > > > -static bool atmci_configure_dma(struct atmel_mci *host) > > +static int atmci_configure_dma(struct atmel_mci *host) > > { > > struct mci_platform_data *pdata; > > dma_cap_mask_t mask; > > + int ret = 0; > > > > if (host == NULL) > > - return false; > > + return -EINVAL; > > > > pdata = host->pdev->dev.platform_data; > > > > dma_cap_zero(mask); > > dma_cap_set(DMA_SLAVE, mask); > > > > - host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); > > - if (!host->dma.chan) { > > - dev_warn(&host->pdev->dev, "no DMA channel available\n"); > > - return false; > > - } else { > > - dev_info(&host->pdev->dev, > > - "using %s for DMA transfers\n", > > - dma_chan_name(host->dma.chan)); > > - > > - host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > > - host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > - host->dma_conf.src_maxburst = 1; > > - host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > > - host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > - host->dma_conf.dst_maxburst = 1; > > - host->dma_conf.device_fc = false; > > - return true; > > + host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev, "rxtx"); > > + if (IS_ERR(host->dma.chan)) { > > + ret = PTR_ERR(host->dma.chan); > > + if (ret != -EPROBE_DEFER) > > + dev_warn(&host->pdev->dev, "no DMA channel available\n"); > > + return ret; > > } > > + > > + dev_info(&host->pdev->dev, > > + "using %s for DMA transfers\n", > > + dma_chan_name(host->dma.chan)); > > + > > + host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; > > + host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > + host->dma_conf.src_maxburst = 1; > > + host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; > > + host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > > + host->dma_conf.dst_maxburst = 1; > > + host->dma_conf.device_fc = false; > > + return ret; > > } > > > > /* > > @@ -2419,7 +2422,10 @@ static int __init atmci_probe(struct platform_device *pdev) > > > > /* Get MCI capabilities and set operations according to it */ > > atmci_get_cap(host); > > - if (atmci_configure_dma(host)) { > > + ret = atmci_configure_dma(host); > > + if (ret == -EPROBE_DEFER) > > + goto err_dma_probe_defer; > > + if (ret == 0) { > > host->prepare_data = &atmci_prepare_data_dma; > > host->submit_data = &atmci_submit_data_dma; > > host->stop_transfer = &atmci_stop_transfer_dma; > > @@ -2506,6 +2512,7 @@ err_init_slot: > > del_timer_sync(&host->timer); > > if (host->dma.chan) > > dma_release_channel(host->dma.chan); > > +err_dma_probe_defer: > > free_irq(irq, host); > > return ret; > > } > > @@ -2573,6 +2580,7 @@ static const struct dev_pm_ops atmci_dev_pm_ops = { > > }; > > > > static struct platform_driver atmci_driver = { > > + .probe = atmci_probe, > > .remove = __exit_p(atmci_remove), > > .driver = { > > .name = "atmel_mci", > > @@ -2583,7 +2591,7 @@ static struct platform_driver atmci_driver = { > > > > static int __init atmci_init(void) > > { > > - return platform_driver_probe(&atmci_driver, atmci_probe); > > + return platform_driver_register(&atmci_driver); > > } > > > > static void __exit atmci_exit(void) > > @@ -2591,7 +2599,7 @@ static void __exit atmci_exit(void) > > platform_driver_unregister(&atmci_driver); > > } > > > > -late_initcall(atmci_init); /* try to load after dma driver when built-in */ > > +subsys_initcall(atmci_init); > > If deferring probe is activated, so I don't know why a special initcall > function is still needed. > Right, initcall is still a constraint I can remove, I'll replace it with module_platform_driver(). > > module_exit(atmci_exit); > > > > MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); > > Ludovic ^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan 2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches 2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches @ 2014-11-14 14:46 ` Nicolas Ferre 2014-11-19 10:45 ` Ulf Hansson 2 siblings, 0 replies; 6+ messages in thread From: Nicolas Ferre @ 2014-11-14 14:46 UTC (permalink / raw) To: linux-arm-kernel On 14/11/2014 15:36, Ludovic Desroches : > All boards with a dma controller have DT support so using > dma_request_slave_channel_compat is no more needed. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Yes, sure. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > > Sorry for the noise, typo in cc list. > > drivers/mmc/host/atmel-mci.c | 20 +------------------- > 1 file changed, 1 insertion(+), 19 deletions(-) > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > index a7b59ba..de2287c 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -2272,23 +2272,6 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, > mmc_free_host(slot->mmc); > } > > -static bool atmci_filter(struct dma_chan *chan, void *pdata) > -{ > - struct mci_platform_data *sl_pdata = pdata; > - struct mci_dma_data *sl; > - > - if (!sl_pdata) > - return false; > - > - sl = sl_pdata->dma_slave; > - if (sl && find_slave_dev(sl) == chan->device->dev) { > - chan->private = slave_data_ptr(sl); > - return true; > - } else { > - return false; > - } > -} > - > static bool atmci_configure_dma(struct atmel_mci *host) > { > struct mci_platform_data *pdata; > @@ -2302,8 +2285,7 @@ static bool atmci_configure_dma(struct atmel_mci *host) > dma_cap_zero(mask); > dma_cap_set(DMA_SLAVE, mask); > > - host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, > - &host->pdev->dev, "rxtx"); > + host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); > if (!host->dma.chan) { > dev_warn(&host->pdev->dev, "no DMA channel available\n"); > return false; > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 6+ messages in thread
* [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan 2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches 2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches 2014-11-14 14:46 ` [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Nicolas Ferre @ 2014-11-19 10:45 ` Ulf Hansson 2 siblings, 0 replies; 6+ messages in thread From: Ulf Hansson @ 2014-11-19 10:45 UTC (permalink / raw) To: linux-arm-kernel On 14 November 2014 15:36, Ludovic Desroches <ludovic.desroches@atmel.com> wrote: > All boards with a dma controller have DT support so using > dma_request_slave_channel_compat is no more needed. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Thanks! Applied for next. Kind regards Uffe > --- > > Sorry for the noise, typo in cc list. > > drivers/mmc/host/atmel-mci.c | 20 +------------------- > 1 file changed, 1 insertion(+), 19 deletions(-) > > diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c > index a7b59ba..de2287c 100644 > --- a/drivers/mmc/host/atmel-mci.c > +++ b/drivers/mmc/host/atmel-mci.c > @@ -2272,23 +2272,6 @@ static void atmci_cleanup_slot(struct atmel_mci_slot *slot, > mmc_free_host(slot->mmc); > } > > -static bool atmci_filter(struct dma_chan *chan, void *pdata) > -{ > - struct mci_platform_data *sl_pdata = pdata; > - struct mci_dma_data *sl; > - > - if (!sl_pdata) > - return false; > - > - sl = sl_pdata->dma_slave; > - if (sl && find_slave_dev(sl) == chan->device->dev) { > - chan->private = slave_data_ptr(sl); > - return true; > - } else { > - return false; > - } > -} > - > static bool atmci_configure_dma(struct atmel_mci *host) > { > struct mci_platform_data *pdata; > @@ -2302,8 +2285,7 @@ static bool atmci_configure_dma(struct atmel_mci *host) > dma_cap_zero(mask); > dma_cap_set(DMA_SLAVE, mask); > > - host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, > - &host->pdev->dev, "rxtx"); > + host->dma.chan = dma_request_slave_channel(&host->pdev->dev, "rxtx"); > if (!host->dma.chan) { > dev_warn(&host->pdev->dev, "no DMA channel available\n"); > return false; > -- > 2.0.3 > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-11-19 10:45 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-11-14 14:36 [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Ludovic Desroches 2014-11-14 14:36 ` [RESEND PATCH 2/2] mmc: atmel-mci: introduce probe deferring Ludovic Desroches 2014-11-14 14:55 ` Nicolas Ferre 2014-11-14 15:14 ` Ludovic Desroches 2014-11-14 14:46 ` [RESEND PATCH 1/2] mmc: atmel-mci: remove compat for non DT board when requesting dma chan Nicolas Ferre 2014-11-19 10:45 ` Ulf Hansson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).