From mboxrd@z Thu Jan 1 00:00:00 1970 From: kgene.kim@samsung.com (Kukjin Kim) Date: Wed, 19 Nov 2014 16:49:53 +0900 Subject: [PATCH] ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling dependent I2C controller In-Reply-To: <1416337853-1558-1-git-send-email-tyler.baker@linaro.org> References: <1416337853-1558-1-git-send-email-tyler.baker@linaro.org> Message-ID: <546C4BA1.6090701@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/19/14 04:10, Tyler Baker wrote: Hi, + Arnd, Olof and Kevin > This patch fixes a long standing issue introduced during the 3.16 merge window. > Shortly after the merge, exynos5250-based arndale boards began to produce the > following errors: > > kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage > kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 > > Further analysis revealed that the S5M8767 voltage regulator used on the > exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the > S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator > fails to probe. Therefore a dependency exists between these two drivers. > In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 > options are enabled, and no errors are produced. However, in the > multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the > errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the > multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. > > Signed-off-by: Tyler Baker Acked-by: Kukjin Kim Thanks, Kukjin > --- > This issue was reported [1]. I've also confirmed this fix on two different > arndale boards. > > [1] https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg38765.html > > arch/arm/configs/multi_v7_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index 3487046..9d7a32f 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y > CONFIG_I2C_DESIGNWARE_PLATFORM=y > CONFIG_I2C_EXYNOS5=y > CONFIG_I2C_MV64XXX=y > +CONFIG_I2C_S3C2410=y > CONFIG_I2C_SIRF=y > CONFIG_I2C_TEGRA=y > CONFIG_I2C_ST=y