linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
Date: Fri, 21 Nov 2014 11:13:17 +0100	[thread overview]
Message-ID: <546F103D.6050004@redhat.com> (raw)
In-Reply-To: <20141121095934.GA4752@lukather>

Hi,

On 11/21/2014 10:59 AM, Maxime Ripard wrote:
> On Fri, Nov 21, 2014 at 09:42:09AM +0100, Hans de Goede wrote:
>> Hi,
>>
>> On 11/21/2014 09:26 AM, Maxime Ripard wrote:
>>> Hi Mauro,
>>>
>>> On Thu, Nov 20, 2014 at 02:28:56PM -0200, Mauro Carvalho Chehab wrote:
>>>> Em Thu, 20 Nov 2014 16:55:24 +0100
>>>> Hans de Goede <hdegoede@redhat.com> escreveu:
>>>>
>>>>> Add support for the larger fifo found on sun5i and sun6i, having a separate
>>>>> compatible for the ir found on sun5i & sun6i also is useful if we ever want
>>>>> to add ir transmit support, because the sun5i & sun6i version do not have
>>>>> transmit support.
>>>>>
>>>>> Note this commits also adds checking for the end-of-packet interrupt flag
>>>>> (which was already enabled), as the fifo-data-available interrupt flag only
>>>>> gets set when the trigger-level is exceeded. So far we've been getting away
>>>>> with not doing this because of the low trigger-level, but this is something
>>>>> which we should have done since day one.
>>>>>
>>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>>>>
>>>> As this is meant to be merged via some other tree:
>>>>
>>>> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
>>>
>>> I think merging it through your tree would be just fine.
>>>
>>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>>
>> Heh, I was thinking it would be best if it went through Maxime's tree because
>> it also has some deps on new clk stuff (well the dts have deps on that), but either
>> way works for me.
>>
>> Maxime if you want this go through Mauro's tree, I can send a pull-req to Mauro
>> (I'm a linux-media sub-maintainer), so if that is the case let me know and I'll
>> prepare a pull-req (after fixing the missing reset documentation in the bindings).
> 
> So much for not reading the cover letter... Sorry.
> 
> We're getting quite close to the end of the ARM merge window, and I
> got a couple comments, Lee hasn't commented yet, so I'd say it's a bit
> too late for this to come in.

Oh, but this was not intended for 3.19, this can wait till 3.20 from my pov,
sorry if that was not clear. I was assuming that the merge window was more
or less closed already, so that this going into 3.20 was expected.

Regrrds,

Hans

  reply	other threads:[~2014-11-21 10:13 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-20 15:55 [PATCH 0/9] sun6i / A31 ir receiver support Hans de Goede
2014-11-20 15:55 ` [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter Hans de Goede
2014-11-21  8:35   ` Maxime Ripard
2014-11-21  8:44     ` Hans de Goede
2014-11-21 11:15       ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c Hans de Goede
2014-11-20 15:55 ` [PATCH 3/9] clk: sunxi: Add prcm mod0 clock driver Hans de Goede
2014-11-20 18:24   ` [linux-sunxi] " Chen-Yu Tsai
2014-11-20 19:32     ` Hans de Goede
2014-11-21  8:49   ` Maxime Ripard
2014-11-21  9:13     ` Hans de Goede
2014-11-24 22:03       ` Maxime Ripard
2014-11-25  8:29         ` Hans de Goede
2014-11-25  8:37           ` Hans de Goede
2014-11-26 21:13           ` Maxime Ripard
2014-11-27  8:41             ` Hans de Goede
2014-11-27  9:28               ` Chen-Yu Tsai
2014-11-27 10:10                 ` Hans de Goede
2014-11-27 19:05                   ` Maxime Ripard
2014-11-28 13:37                     ` Hans de Goede
2014-12-02 15:45                       ` Maxime Ripard
2014-12-03  9:49                         ` Hans de Goede
2014-12-07 18:08                           ` Maxime Ripard
2014-12-08  8:19                             ` Hans de Goede
2014-12-09  8:51                               ` Maxime Ripard
2014-11-27 18:51               ` Maxime Ripard
2014-11-27 16:40             ` Boris Brezillon
2014-11-27 19:15               ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 4/9] rc: sunxi-cir: Add support for an optional reset controller Hans de Goede
2014-11-20 16:28   ` Mauro Carvalho Chehab
2014-11-21  8:51     ` Maxime Ripard
2014-11-20 23:05   ` [linux-sunxi] " Julian Calaby
2014-11-20 15:55 ` [PATCH 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i Hans de Goede
2014-11-20 16:28   ` Mauro Carvalho Chehab
2014-11-21  8:26     ` Maxime Ripard
2014-11-21  8:42       ` Hans de Goede
2014-11-21  9:59         ` Maxime Ripard
2014-11-21 10:13           ` Hans de Goede [this message]
2014-11-23 15:47             ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 6/9] ARM: dts: sun6i: Add ir_clk node Hans de Goede
2014-11-20 15:55 ` [PATCH 7/9] ARM: dts: sun6i: Add ir node Hans de Goede
2014-11-20 15:55 ` [PATCH 8/9] ARM: dts: sun6i: Add pinmux settings for the ir pins Hans de Goede
2014-11-20 15:55 ` [PATCH 9/9] ARM: dts: sun6i: Enable ir receiver on the Mele M9 Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=546F103D.6050004@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).