From: timo.kokkonen@offcode.fi (Timo Kokkonen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot
Date: Thu, 27 Nov 2014 08:53:51 +0200 [thread overview]
Message-ID: <5476CA7F.4000802@offcode.fi> (raw)
In-Reply-To: <1416572610-1770-1-git-send-email-timo.kokkonen@offcode.fi>
Hi,
On 21.11.2014 14:23, Timo Kokkonen wrote:
> By default the driver will start a kernel timer which keeps on kicking
> the watchdog HW until user space has opened the watchdog
> device. Usually this is desirable as the watchdog HW is running by
> default and the user space may not have any watchdog daemon running at
> all.
>
> However, on production systems it may be mandatory that also early
> crashes and lockups will lead to a watchdog reset, even if they happen
> before the user space has opened the watchdog device.
>
> To resolve the issue, add a new device tree property
> "enable-early-reset" which will prevent the kernel timer from pinging
> the watchdog HW on behalf of user space. The default is still to use
> kernel timer, but more strict behavior can be enabled via the device
> tree property.
>
> Signed-off-by: Timo Kokkonen <timo.kokkonen@offcode.fi>
I forgot to put the PATCHv2 on the subject line.. But anyway, any
thoughts about it? Is there something that should be done to get it forward?
Thanks,
-Timo
> ---
> Documentation/devicetree/bindings/watchdog/atmel-wdt.txt | 4 ++++
> drivers/watchdog/at91sam9_wdt.c | 6 +++++-
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> index f90e294..a0b7b75 100644
> --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
> @@ -28,6 +28,10 @@ Optional properties:
> entering idle state.
> - atmel,dbg-halt : Should be present if you want to stop the watchdog when
> entering debug state.
> +- enable-early-reset : Should be present if you want to let the
> + watchdog timer to expire even before user space has opened the
> + device. If not set, a kernel timer will keep on pinging the
> + watchdog until it is opened.
>
> Example:
> watchdog at fffffd40 {
> diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
> index 489729b..78b1977 100644
> --- a/drivers/watchdog/at91sam9_wdt.c
> +++ b/drivers/watchdog/at91sam9_wdt.c
> @@ -89,6 +89,7 @@ struct at91wdt {
> u32 mr_mask;
> unsigned long heartbeat; /* WDT heartbeat in jiffies */
> bool nowayout;
> + bool no_early_timer;
> unsigned int irq;
> };
>
> @@ -122,7 +123,7 @@ static void at91_ping(unsigned long data)
> {
> struct at91wdt *wdt = (struct at91wdt *)data;
> if (time_before(jiffies, wdt->next_heartbeat) ||
> - !watchdog_active(&wdt->wdd)) {
> + (!watchdog_active(&wdt->wdd) && !wdt->no_early_timer)) {
> at91_wdt_reset(wdt);
> mod_timer(&wdt->timer, jiffies + wdt->heartbeat);
> } else {
> @@ -316,6 +317,9 @@ static int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt)
>
> wdt->mr |= max | ((max - min) << 16);
>
> + if (of_property_read_bool(np, "enable-early-reset"))
> + wdt->no_early_timer = 1;
> +
> return 0;
> }
> #else
>
next prev parent reply other threads:[~2014-11-27 6:53 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-23 10:40 [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot Timo Kokkonen
2014-11-12 8:20 ` Timo Kokkonen
2014-11-13 9:12 ` Nicolas Ferre
2014-11-14 8:40 ` Timo Kokkonen
2014-11-21 12:23 ` Timo Kokkonen
2014-11-27 6:53 ` Timo Kokkonen [this message]
2014-11-27 9:22 ` Nicolas Ferre
2014-11-27 17:23 ` Guenter Roeck
2014-11-27 19:06 ` Boris Brezillon
2014-11-27 19:31 ` Guenter Roeck
2014-11-28 0:30 ` Alexandre Belloni
2014-11-28 6:40 ` Timo Kokkonen
2014-11-27 19:00 ` Boris Brezillon
2014-11-28 6:42 ` Timo Kokkonen
2014-12-05 12:57 ` Timo Kokkonen
2014-12-05 14:12 ` Boris Brezillon
2014-12-05 18:42 ` Timo Kokkonen
2014-12-05 19:02 ` Guenter Roeck
2014-12-05 20:32 ` Timo Kokkonen
2014-12-05 21:39 ` Guenter Roeck
2014-12-06 10:11 ` Timo Kokkonen
2015-01-13 14:53 ` Guenter Roeck
2015-01-14 6:09 ` Timo Kokkonen
2015-02-18 12:57 ` [PATCHv3 0/2] watchdog: Introduce "early-timeout-sec" property Timo Kokkonen
2015-02-18 12:57 ` [PATCH 1/2] devicetree: Document generic watchdog properties Timo Kokkonen
2015-02-18 12:57 ` [PATCH 2/2] at91sam9_wdt: Allow watchdog to reset device at early boot Timo Kokkonen
2015-02-18 13:21 ` Boris Brezillon
2015-02-18 13:59 ` Guenter Roeck
2015-02-18 14:17 ` Boris Brezillon
2015-02-18 14:50 ` Guenter Roeck
2015-02-18 16:00 ` Alexandre Belloni
2015-02-18 17:50 ` Guenter Roeck
2015-02-18 20:21 ` Boris Brezillon
2015-02-19 6:02 ` Timo Kokkonen
2015-02-18 21:11 ` Rob Herring
2015-02-19 6:14 ` Timo Kokkonen
2015-02-20 14:06 ` Rob Herring
2015-02-20 16:28 ` Guenter Roeck
2015-02-20 19:43 ` Boris Brezillon
2015-02-20 20:04 ` Guenter Roeck
2015-02-20 7:48 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-20 7:51 ` Boris Brezillon
2015-02-20 16:33 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-20 17:16 ` Boris Brezillon
2015-02-20 18:06 ` Guenter Roeck
2015-02-23 7:29 ` Timo Kokkonen
2015-02-23 8:51 ` Boris Brezillon
2015-02-23 9:11 ` Timo Kokkonen
2015-02-23 16:19 ` Guenter Roeck
2015-02-23 17:10 ` Rob Herring
2015-02-23 17:43 ` Guenter Roeck
2015-02-20 8:00 ` Timo Kokkonen
2015-02-20 16:09 ` Guenter Roeck
2015-02-18 13:16 ` [PATCHv3 0/2] watchdog: Introduce "early-timeout-sec" property Boris Brezillon
2015-02-18 13:51 ` Timo Kokkonen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5476CA7F.4000802@offcode.fi \
--to=timo.kokkonen@offcode.fi \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).