From mboxrd@z Thu Jan  1 00:00:00 1970
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: Thu, 27 Nov 2014 21:14:42 +0900
Subject: [PATCH 11/19] clk: samsung: exynos5433: Add clocks for
 CMU_BUS{0|1|2} domains
In-Reply-To: <54771518.1010004@samsung.com>
References: <1417073716-22997-1-git-send-email-cw00.choi@samsung.com>
 <1417073716-22997-12-git-send-email-cw00.choi@samsung.com>
 <6217579.xNXtO7YiDs@wuerfel> <54771173.6090408@samsung.com>
 <54771518.1010004@samsung.com>
Message-ID: <547715B2.3070508@samsung.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Sylwester,

On 11/27/2014 09:12 PM, Sylwester Nawrocki wrote:
> Hi,
> 
> On 27/11/14 12:56, Chanwoo Choi wrote:
>> On 11/27/2014 08:41 PM, Arnd Bergmann wrote:
>>>> On Thursday 27 November 2014 16:35:08 Chanwoo Choi wrote:
>>>>>> +  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
>>>>>> +    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
>>>>>> +    which generates global data buses clock and global peripheral buses clock.
>>>>>>  
>>>>>>  - reg: physical base address of the controller and length of memory mapped
>>>>>>    region.
>>>>>>
>>>>
>>>> This looks like you are duplicating the bindings and the code, but
>>>> it's really the same hardware multiple times with minor variations
>>>> that you should be able to describe properly here. Why not make
>>>> three nodes with the same compatible string and have them handled
>>>> by the same code?
>>
>> Each CMU_BUSx domain of Exynos5433 have different base address as following:
>> - CMU_BUS0's base address and range : 0x1360_0000 ~ 0x1360_0b04
>> - CMU_BUS1's base address and range : 0x1480_0000 ~ 0x1480_0b04
>> - CMU_BUS2's base address and range : 0x1340_0000 ~ 0x1340_0b04
>>
>> So, I implement CMU_BUSx domain which has each compatible string.
> 
> You can always have multiple entries in the reg property. I've done
> something like this for the exynos4415 CMU_ISPx units:
> 
> 	cmu_isp: clock-controller at 12060000 {
> 		compatible = "samsung,exynos4415-cmu-isp";
> 		reg = <0x12060000 0xB10>, <0x12070000 0xB10>;
> 		#clock-cells = <1>;
> 
> 		assigned-clocks = <&cmu CLK_FOUT_ISP_PLL>;
> 		assigned-clock-rates = <300000000>;
> 	};

Thanks for your guide.

I'll re-implment CMU_BUSx domain according to your guide.

Best Regards,
Chanwoo Choi