From mboxrd@z Thu Jan  1 00:00:00 1970
From: linux@roeck-us.net (Guenter Roeck)
Date: Fri, 28 Nov 2014 09:57:06 -0800
Subject: [PATCH 2/2] ARM: imx: src: support vf610 system reset controller
In-Reply-To: <1417193015-6033-3-git-send-email-stefan@agner.ch>
References: <1417193015-6033-1-git-send-email-stefan@agner.ch>
 <1417193015-6033-3-git-send-email-stefan@agner.ch>
Message-ID: <5478B772.1070701@roeck-us.net>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 11/28/2014 08:43 AM, Stefan Agner wrote:
> Support Vybrid SoC's system reset controller (SRC). Currently we
> don't register a reset controller but only support the imx_cpu_jump
> and imx_cpu_arg functions.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>   arch/arm/mach-imx/Makefile     |  2 +-
>   arch/arm/mach-imx/common.h     |  1 +
>   arch/arm/mach-imx/mach-vf610.c |  8 +++++++
>   arch/arm/mach-imx/src-vf610.c  | 53 ++++++++++++++++++++++++++++++++++++++++++
>   4 files changed, 63 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/mach-imx/src-vf610.c
>
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index f5ac685..6f689fc 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -108,7 +108,7 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
>   obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
>   obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
>
> -obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
> +obj-$(CONFIG_SOC_VF610) += clk-vf610.o src-vf610.o mach-vf610.o
>
>   obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
>
> diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
> index 59ce8f3..458db03 100644
> --- a/arch/arm/mach-imx/common.h
> +++ b/arch/arm/mach-imx/common.h
> @@ -102,6 +102,7 @@ static inline void imx_scu_map_io(void) {}
>   static inline void imx_smp_prepare(void) {}
>   #endif
>   void imx_src_init(void);
> +void vf610_src_init(void);
>   void imx_gpc_init(void);
>   void imx_gpc_pre_suspend(bool arm_power_off);
>   void imx_gpc_post_resume(void);
> diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
> index c11ab6a..391c2b5 100644
> --- a/arch/arm/mach-imx/mach-vf610.c
> +++ b/arch/arm/mach-imx/mach-vf610.c
> @@ -11,6 +11,13 @@
>   #include <linux/irqchip.h>
>   #include <asm/mach/arch.h>
>   #include <asm/hardware/cache-l2x0.h>
> +#include "common.h"
> +
> +static void __init vf610_init_machine(void)
> +{
> +	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +	vf610_src_init();
> +};
>
>   static const char * const vf610_dt_compat[] __initconst = {
>   	"fsl,vf610",
> @@ -20,5 +27,6 @@ static const char * const vf610_dt_compat[] __initconst = {
>   DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
>   	.l2c_aux_val	= 0,
>   	.l2c_aux_mask	= ~0,
> +	.init_machine	= vf610_init_machine,
>   	.dt_compat	= vf610_dt_compat,
>   MACHINE_END
> diff --git a/arch/arm/mach-imx/src-vf610.c b/arch/arm/mach-imx/src-vf610.c
> new file mode 100644
> index 0000000..5fba1d4
> --- /dev/null
> +++ b/arch/arm/mach-imx/src-vf610.c
> @@ -0,0 +1,53 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + * Copyright 2014 Toradex AG
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/reboot.h>
> +#include <linux/reset-controller.h>
> +#include <linux/smp.h>
> +#include <asm/smp_plat.h>
> +#include "common.h"
> +
> +#define SRC_SCR				0x000
> +#define SRC_GPR0			0x020
> +#define BP_SRC_SCR_SW_RST		12
> +
> +static struct notifier_block restart_nb;
> +static void __iomem *src_base;
> +
> +static int vf610_src_restart(struct notifier_block *nb, unsigned long action,
> +			       void *data)
> +{
> +	writel(1 << BP_SRC_SCR_SW_RST, src_base + SRC_SCR);
> +	return NOTIFY_DONE;
> +}
> +
> +void __init vf610_src_init(void)
> +{
> +	struct device_node *np;
> +
> +	np = of_find_compatible_node(NULL, NULL, "fsl,vf610-src");
> +	if (!np)
> +		return;
> +
> +	src_base = of_iomap(np, 0);
> +	WARN_ON(!src_base);

It doesn't make much sense to register the restart handler if src_base is NULL.

> +
> +	restart_nb.notifier_call = vf610_src_restart;
> +	restart_nb.priority = 192;

The above can be initialized statically in the restart_nb variable;
all you have to do is to move the variable below vf610_src_restart.

> +	if (register_restart_handler(&restart_nb))
> +		printk(KERN_WARNING "failed to setup restart handler.\n");

I would suggest to use pr_warn().

Thanks,
Guenter