From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Mon, 1 Dec 2014 17:09:05 +0100 Subject: [PATCH 1/4] ARM: at91: remove at91sam9263 legacy board support In-Reply-To: <1417434775.30245.29.camel@x220> References: <1417434775.30245.29.camel@x220> Message-ID: <547C92A1.8000902@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Le 01/12/2014 12:52, Paul Bolle a ?crit : > On Wed, 2014-11-19 at 11:31 +0100, Nicolas Ferre wrote: >> Remove legacy support for at91sam9rl boards. >> This include board files removal plus all legacy code for non DT boards >> support. >> Use the Device Tree for running this board with newer kernels. >> >> Signed-off-by: Nicolas Ferre >> --- > > There's some further cleanup possible after this patch. I noticed that > when it landed in today's linux-next (ie, next-20141201) as commit > 4403ac46edcd ("ARM: at91: remove at91sam9263 legacy board support"). > >> arch/arm/configs/at91sam9263_defconfig | 151 --- >> arch/arm/mach-at91/Kconfig.non_dt | 21 - >> arch/arm/mach-at91/Makefile | 4 - >> arch/arm/mach-at91/at91sam9263.c | 399 -------- >> arch/arm/mach-at91/at91sam9263_devices.c | 1538 ------------------------------ >> arch/arm/mach-at91/board-sam9263ek.c | 493 ---------- >> 6 files changed, 2606 deletions(-) >> delete mode 100644 arch/arm/configs/at91sam9263_defconfig >> delete mode 100644 arch/arm/mach-at91/at91sam9263_devices.c >> delete mode 100644 arch/arm/mach-at91/board-sam9263ek.c >> >> [...] >> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c >> deleted file mode 100644 >> index cef0e2f57068..000000000000 >> --- a/arch/arm/mach-at91/at91sam9263_devices.c >> +++ /dev/null >> [...] >> -/* -------------------------------------------------------------------- >> - * RTT >> - * -------------------------------------------------------------------- */ >> - >> -static struct resource rtt0_resources[] = { >> - { >> - .start = AT91SAM9263_BASE_RTT0, >> - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, >> - .flags = IORESOURCE_MEM, >> - }, { >> - .flags = IORESOURCE_MEM, >> - }, { >> - .flags = IORESOURCE_IRQ, >> - } >> -}; >> - >> -static struct platform_device at91sam9263_rtt0_device = { >> - .name = "at91_rtt", >> - .id = 0, >> - .resource = rtt0_resources, >> -}; >> - >> -static struct resource rtt1_resources[] = { >> - { >> - .start = AT91SAM9263_BASE_RTT1, >> - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, >> - .flags = IORESOURCE_MEM, >> - }, { >> - .flags = IORESOURCE_MEM, >> - }, { >> - .flags = IORESOURCE_IRQ, >> - } >> -}; >> - >> -static struct platform_device at91sam9263_rtt1_device = { >> - .name = "at91_rtt", >> - .id = 1, >> - .resource = rtt1_resources, >> -}; >> - >> -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) >> -static void __init at91_add_device_rtt_rtc(void) >> -{ >> - struct platform_device *pdev; >> - struct resource *r; >> - >> - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { > > This and... > >> - case 0: >> - /* >> - * The second resource is needed only for the chosen RTT: >> - * GPBR will serve as the storage for RTC time offset >> - */ >> - at91sam9263_rtt0_device.num_resources = 3; >> - at91sam9263_rtt1_device.num_resources = 1; >> - pdev = &at91sam9263_rtt0_device; >> - r = rtt0_resources; >> - break; >> - case 1: >> - at91sam9263_rtt0_device.num_resources = 1; >> - at91sam9263_rtt1_device.num_resources = 3; >> - pdev = &at91sam9263_rtt1_device; >> - r = rtt1_resources; >> - break; >> - default: >> - pr_err("at91sam9263: only supports 2 RTT (%d)\n", >> - CONFIG_RTC_DRV_AT91SAM9_RTT); > > this are the only places were the Kconfig symbol RTC_DRV_AT91SAM9_RTT > was used. It is useless now. That matches its help text, that reads: > This option is only relevant for legacy board support and > won't be used when booting a DT board. > >> - return; >> - } >> - >> - pdev->name = "rtc-at91sam9"; >> - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; >> - r[1].end = r[1].start + 3; >> - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; >> - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; >> -} >> -#else >> -static void __init at91_add_device_rtt_rtc(void) >> -{ >> - /* Only one resource is needed: RTT not used as RTC */ >> - at91sam9263_rtt0_device.num_resources = 1; >> - at91sam9263_rtt1_device.num_resources = 1; >> -} >> -#endif >> - >> -static void __init at91_add_device_rtt(void) >> -{ >> - at91_add_device_rtt_rtc(); >> - platform_device_register(&at91sam9263_rtt0_device); >> - platform_device_register(&at91sam9263_rtt1_device); >> -} > > Is a patch to remove that symbol from drivers/rtc/Kconfig queued > somewhere? Hi Paul, In fact these config options are flagged as being useless for !DT. As the modifications of this Kconfig (in a "drivers" branch) and the removal of !DT boards (in a "cleaup" branch) will happen in 3.19, I was planning to come back to these 2 options by removing them later in order to avoid to solve a merge conflict. https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/drivers/rtc/Kconfig?id=3969eb48ad7f3f3bef61f5474b7214e601fd2d75 As you can see in the commit above, they have been properly tagged by Boris. So, I suggest to get rid of them during 3.19-rc phase. Thanks, bye. -- Nicolas Ferre