* [GIT PULL] at91: defconfig for 3.19 #1
@ 2014-12-02 16:28 Nicolas Ferre
2014-12-04 16:28 ` Arnd Bergmann
0 siblings, 1 reply; 5+ messages in thread
From: Nicolas Ferre @ 2014-12-02 16:28 UTC (permalink / raw)
To: linux-arm-kernel
Arnd, Olof, Kevin,
Here is a pull-request for updating the AT91 defconfig files. Note that we only
have two now that the per-SoC defconfigs are gone.
Thanks, best regards,
The following changes since commit 0df1f2487d2f0d04703f142813d53615d62a1da4:
Linux 3.18-rc3 (2014-11-02 15:01:51 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git tags/at91-defconfig
for you to fetch changes up to 4cd275f762a21cf21768e327873ba2883c839281:
ARM: at91/defconfig: add DM9000 to at91_dt (2014-12-01 16:30:00 +0100)
----------------------------------------------------------------
First batch of defconfigs for AT91 / 3.19:
- use NEON for all C-A5, neon code handles the !NEON case
- add new XDMA driver
- add some useful drivers as we only have a single defconfig for all
AT91SAM9/RM9200
----------------------------------------------------------------
Ludovic Desroches (1):
ARM: at91: sama5: update defconfig
Nicolas Ferre (4):
ARM: at91/defconfig: add the XDMA driver
ARM: at91/defconfig: add TCB PWM driver selection
ARM: at91/defconfig: add QT1070 to at91_dt
ARM: at91/defconfig: add DM9000 to at91_dt
arch/arm/configs/at91_dt_defconfig | 3 +++
arch/arm/configs/sama5_defconfig | 6 +++++-
2 files changed, 8 insertions(+), 1 deletion(-)
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 5+ messages in thread* [GIT PULL] at91: defconfig for 3.19 #1
2014-12-02 16:28 [GIT PULL] at91: defconfig for 3.19 #1 Nicolas Ferre
@ 2014-12-04 16:28 ` Arnd Bergmann
2014-12-04 16:33 ` Nicolas Ferre
2014-12-04 16:38 ` [GIT PULL] at91: defconfig for 3.19 #1 (bis) Nicolas Ferre
0 siblings, 2 replies; 5+ messages in thread
From: Arnd Bergmann @ 2014-12-04 16:28 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday 02 December 2014 17:28:31 Nicolas Ferre wrote:
>
> The following changes since commit 0df1f2487d2f0d04703f142813d53615d62a1da4:
>
> Linux 3.18-rc3 (2014-11-02 15:01:51 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git tags/at91-defconfig
>
> for you to fetch changes up to 4cd275f762a21cf21768e327873ba2883c839281:
>
> ARM: at91/defconfig: add DM9000 to at91_dt (2014-12-01 16:30:00 +0100)
>
> ----------------------------------------------------------------
> First batch of defconfigs for AT91 / 3.19:
> - use NEON for all C-A5, neon code handles the !NEON case
> - add new XDMA driver
> - add some useful drivers as we only have a single defconfig for all
> AT91SAM9/RM9200
I just noticed that this is based on -rc3, while the next/defconfig branch
so far is based on -rc1. If you don't mind, could you rebase your
branch on -rc1 as well and send it again so I can avoid the backmerge?
Thanks,
Arnd
^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL] at91: defconfig for 3.19 #1
2014-12-04 16:28 ` Arnd Bergmann
@ 2014-12-04 16:33 ` Nicolas Ferre
2014-12-04 16:38 ` [GIT PULL] at91: defconfig for 3.19 #1 (bis) Nicolas Ferre
1 sibling, 0 replies; 5+ messages in thread
From: Nicolas Ferre @ 2014-12-04 16:33 UTC (permalink / raw)
To: linux-arm-kernel
Le 04/12/2014 17:28, Arnd Bergmann a ?crit :
> On Tuesday 02 December 2014 17:28:31 Nicolas Ferre wrote:
>>
>> The following changes since commit 0df1f2487d2f0d04703f142813d53615d62a1da4:
>>
>> Linux 3.18-rc3 (2014-11-02 15:01:51 -0800)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git tags/at91-defconfig
>>
>> for you to fetch changes up to 4cd275f762a21cf21768e327873ba2883c839281:
>>
>> ARM: at91/defconfig: add DM9000 to at91_dt (2014-12-01 16:30:00 +0100)
>>
>> ----------------------------------------------------------------
>> First batch of defconfigs for AT91 / 3.19:
>> - use NEON for all C-A5, neon code handles the !NEON case
>> - add new XDMA driver
>> - add some useful drivers as we only have a single defconfig for all
>> AT91SAM9/RM9200
>
> I just noticed that this is based on -rc3, while the next/defconfig branch
> so far is based on -rc1. If you don't mind, could you rebase your
> branch on -rc1 as well and send it again so I can avoid the backmerge?
Sure, I do it right now.
Stay tuned ;-)
Bye,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 5+ messages in thread
* [GIT PULL] at91: defconfig for 3.19 #1 (bis)
2014-12-04 16:28 ` Arnd Bergmann
2014-12-04 16:33 ` Nicolas Ferre
@ 2014-12-04 16:38 ` Nicolas Ferre
2014-12-04 18:10 ` Arnd Bergmann
1 sibling, 1 reply; 5+ messages in thread
From: Nicolas Ferre @ 2014-12-04 16:38 UTC (permalink / raw)
To: linux-arm-kernel
Arnd, Olof, Kevin,
This is the updated version of the 3.19 defconfig pull-request. It is now based
on 3.18-rc1 per Arnd's request.
Here is a pull-request for updating the AT91 defconfig files. Note that we only
have two now that the per-SoC defconfigs are gone.
Thanks, bye,
The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:
Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git tags/at91-defconfig
for you to fetch changes up to 51756cbd407b760858a16341eb37ee527be178fd:
ARM: at91/defconfig: add DM9000 to at91_dt (2014-12-04 17:32:01 +0100)
----------------------------------------------------------------
First batch of defconfigs for AT91 / 3.19:
- use NEON for all C-A5, neon code handles the !NEON case
- add new XDMA driver
- add some useful drivers as we only have a single defconfig for all
AT91SAM9/RM9200
----------------------------------------------------------------
Ludovic Desroches (1):
ARM: at91: sama5: update defconfig
Nicolas Ferre (4):
ARM: at91/defconfig: add the XDMA driver
ARM: at91/defconfig: add TCB PWM driver selection
ARM: at91/defconfig: add QT1070 to at91_dt
ARM: at91/defconfig: add DM9000 to at91_dt
arch/arm/configs/at91_dt_defconfig | 3 +++
arch/arm/configs/sama5_defconfig | 6 +++++-
2 files changed, 8 insertions(+), 1 deletion(-)
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 5+ messages in thread* [GIT PULL] at91: defconfig for 3.19 #1 (bis)
2014-12-04 16:38 ` [GIT PULL] at91: defconfig for 3.19 #1 (bis) Nicolas Ferre
@ 2014-12-04 18:10 ` Arnd Bergmann
0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2014-12-04 18:10 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday 04 December 2014 17:38:02 Nicolas Ferre wrote:
> Arnd, Olof, Kevin,
>
> This is the updated version of the 3.19 defconfig pull-request. It is now based
> on 3.18-rc1 per Arnd's request.
>
> Here is a pull-request for updating the AT91 defconfig files. Note that we only
> have two now that the per-SoC defconfigs are gone.
>
> Thanks, bye,
>
> The following changes since commit f114040e3ea6e07372334ade75d1ee0775c355e1:
>
> Linux 3.18-rc1 (2014-10-19 18:08:38 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git tags/at91-defconfig
>
> for you to fetch changes up to 51756cbd407b760858a16341eb37ee527be178fd:
>
> ARM: at91/defconfig: add DM9000 to at91_dt (2014-12-04 17:32:01 +0100)
>
> ----------------------------------------------------------------
> First batch of defconfigs for AT91 / 3.19:
> - use NEON for all C-A5, neon code handles the !NEON case
> - add new XDMA driver
> - add some useful drivers as we only have a single defconfig for all
> AT91SAM9/RM9200
>
Pulled into next/defconfig, thanks!
Arnd
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-12-04 18:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-02 16:28 [GIT PULL] at91: defconfig for 3.19 #1 Nicolas Ferre
2014-12-04 16:28 ` Arnd Bergmann
2014-12-04 16:33 ` Nicolas Ferre
2014-12-04 16:38 ` [GIT PULL] at91: defconfig for 3.19 #1 (bis) Nicolas Ferre
2014-12-04 18:10 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).