From: "Heiko Stübner" <heiko@sntech.de>
To: Johan Jonker <jbx6244@gmail.com>
Cc: quentin.schulz@theobroma-systems.com,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
Heiko Stuebner <heiko.stuebner@cherry.de>
Subject: Re: [PATCH] arm64: dts: rockchip: set num-cs property for spi on px30
Date: Mon, 22 Jan 2024 17:26:35 +0100 [thread overview]
Message-ID: <5499059.e8TTKsaY2g@diego> (raw)
In-Reply-To: <3617742e-9468-4b58-bdb9-94c880eccb42@gmail.com>
Hi Johan,
Am Montag, 22. Januar 2024, 17:05:11 CET schrieb Johan Jonker:
> Hi,
>
> On 1/19/24 11:16, Heiko Stuebner wrote:
> > From: Heiko Stuebner <heiko.stuebner@cherry.de>
> >
> > The px30 has two spi controllers with two chip-selects each.
> > The num-cs property is specified as the total number of chip
> > selects a controllers has and is used since 2020 to find uses
> > of chipselects outside that range in the Rockchip spi driver.
>
> > Without the property set, the default is 1, so spi devices
> > using the second chipselect will not be created.
>
>
> num-cs is defined as 32 bit:
>
> num-cs:
> $ref: /schemas/types.yaml#/definitions/uint32
> description:
>
> Total number of chip selects.
>
> ===
>
> num-cs is parsed as 16 bit in spi-rockchip.c:
>
> #define ROCKCHIP_SPI_MAX_CS_NUM <https://elixir.bootlin.com/linux/latest/C/ident/ROCKCHIP_SPI_MAX_CS_NUM> 4+ ctlr->max_native_cs = ROCKCHIP_SPI_MAX_CS_NUM; + /* + * rk spi0 has two native cs, spi1..5 one cs only + * if num-cs is missing in the dts, default to 1 + */ + if (of_property_read_u16(np, "num-cs", &ctlr->num_chipselect)) u32 + ctlr->num_chipselect = 1; + ctlr->use_gpio_descriptors = true; === num-cs: minimum: 1 maximum: 4
> default: 1
> Both the driver as the binding need a little update. Johan
hmm, this confuses me.
Looking at a commit from 2022 [0] that was already fixed in the driver?
So bith the binding and the driver expect u32 values it seems.
[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9382df0a98aad5bbcd4d634790305a1d786ad224
Heiko
> > Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
> > Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
> > ---
> > arch/arm64/boot/dts/rockchip/px30.dtsi | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
> > index 42ce78beb413..20955556b624 100644
> > --- a/arch/arm64/boot/dts/rockchip/px30.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
> > @@ -632,6 +632,7 @@ spi0: spi@ff1d0000 {
> > clock-names = "spiclk", "apb_pclk";
> > dmas = <&dmac 12>, <&dmac 13>;
> > dma-names = "tx", "rx";
> > + num-cs = <2>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
> > #address-cells = <1>;
> > @@ -647,6 +648,7 @@ spi1: spi@ff1d8000 {
> > clock-names = "spiclk", "apb_pclk";
> > dmas = <&dmac 14>, <&dmac 15>;
> > dma-names = "tx", "rx";
> > + num-cs = <2>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
> > #address-cells = <1>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-01-22 16:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-19 10:16 [PATCH] arm64: dts: rockchip: set num-cs property for spi on px30 Heiko Stuebner
2024-01-22 11:24 ` Quentin Schulz
2024-01-22 16:05 ` Johan Jonker
2024-01-22 16:26 ` Heiko Stübner [this message]
2024-02-13 19:16 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5499059.e8TTKsaY2g@diego \
--to=heiko@sntech.de \
--cc=heiko.stuebner@cherry.de \
--cc=jbx6244@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=quentin.schulz@theobroma-systems.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox