From: vladimir.murzin@arm.com (Vladimir Murzin)
To: linux-arm-kernel@lists.infradead.org
Subject: ioremap vs remap_pfn_range, VMSPLIT, etc
Date: Fri, 09 Jan 2015 18:06:48 +0000 [thread overview]
Message-ID: <54B018B8.1080306@arm.com> (raw)
In-Reply-To: <54B013F0.10408@free.fr>
On 09/01/15 17:46, Mason wrote:
> On 09/01/2015 14:13, Russell King - ARM Linux wrote:
>
>> On Fri, Jan 09, 2015 at 01:59:10PM +0100, Mason wrote:
>>
>>> Yesterday, I used /dev/mem to mmap 2 GB and (to my surprise) it worked.
>>> Specifically, I opened /dev/mem O_RDWR | O_SYNC
>>> then called
>>> mmap(NULL, 1U<<31, PROT_WRITE, MAP_SHARED, fd, 0x80000000);
>>
>> So you asked to map 2GB starting at 2GB physical.
>>
>>> And mmap returned a valid pointer.
>>
>> And that mapping would have been created to map physical addresses
>> 0x80000000-0xffffffff inclusive.
>>
>>> I was expecting it to fail.
>>>
>>> - the kernel is configured with VMSPLIT_3G (3G/1G user/kernel)
>>
>> This has no bearing on the above.
>
> I don't understand why.
>
> mmap allocates virtual addresses in the user-space process, yes?
> So if I had VMSPLIT_2G, user-space processes would be limited
> to 2G virtual addresses, and could not create a single 2G map
> on top of its stack and text space. Or am I missing something?
>
Because you are mmaping special file (dev/mem) mmap call is routed to
the dedicated hook, responsible for all "magic" you see. Please, take a
look at drivers/char/mem.c for details.
Vladimir
>>> - the kernel manages 256 MB RAM
>>> - there is roughly 750 MB of VMALLOC space, no highmem
>>
>> vmalloc has no bearing on the above, mmap() doesn't allocate anything
>> into vmalloc space.
>
> This means remap_pfn_range doesn't "put" anything in the kernel's
> virtual address space.
>
>>> If I requested the same mapping *within the kernel* using ioremap,
>>> would that fail because of limited VMALLOC space?
>>
>> Correct.
>
> OK.
>
>>> Moving to arch-specific questions (namely ARM Cortex-A9).
>>> If I understand correctly (which is very possibly NOT the case)
>>> the CPU has two registers pointing to page tables, one for
>>> the current process, one for the kernel. And the CPU automatically
>>> picks the correct one, based on the active context?
>>> It would seem possible to have a full 4G for process, and a full 4G
>>> for the kernel, using that method, no? (Like Ingo's old 4G/4G split).
>>> Without the performance overhead of fiddling with the page tables.
>>> What am I missing?
>>
>> It's possible to use both, but the CPU selects the page table register
>> according to the virtual address. So it's not possible to have 4G for
>> both. There's only a restricted set of options: 2G / 2G, where the
>> bottom 2G of virtual space uses TTBR0 and the upper 2G uses TTBR1.
>> 1G / 3G (1G for TTBR0, 3G for TTBR1).
>>
>> We don't use it because most people run with 3G for userspace, which
>> isn't supported in hardware.
>
> I see. Thanks for spelling it out.
>
> Regards.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
>
next prev parent reply other threads:[~2015-01-09 18:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 12:59 ioremap vs remap_pfn_range, VMSPLIT, etc Mason
2015-01-09 13:13 ` Russell King - ARM Linux
2015-01-09 17:46 ` Mason
2015-01-09 18:06 ` Vladimir Murzin [this message]
2015-01-09 18:42 ` Mason
2015-01-09 19:05 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B018B8.1080306@arm.com \
--to=vladimir.murzin@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).