From mboxrd@z Thu Jan 1 00:00:00 1970 From: josh.wu@atmel.com (Josh Wu) Date: Wed, 14 Jan 2015 10:48:21 +0800 Subject: [PATCH v2 0/8] ARM: at91: dts: sama5d3: add dt support for atmel isi and ov2640 sensor In-Reply-To: <54B53455.9050407@atmel.com> References: <1420362153-500-1-git-send-email-josh.wu@atmel.com> <54B53455.9050407@atmel.com> Message-ID: <54B5D8F5.6000800@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 1/13/2015 11:05 PM, Nicolas Ferre wrote: > Le 04/01/2015 10:02, Josh Wu a ?crit : >> This patch series add ISI and ov2640 support on dts files. >> >> As the ov2640 driver dt is still in review. The patch is in: https://patchwork.linuxtv.org/patch/27554/ >> So I want to send this dt patch early for a review. >> >> v1 -> v2: >> 1. add one more patch to change the pin name of ISI_MCK >> 2. rewrite the commit [4/8] ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}. >> 3. move the common chip parts of ISI node to sama5d3.dtsi. >> >> Bo Shen (3): >> ARM: at91: dts: sama5d3: split isi pinctrl >> ARM: at91: dts: sama5d3: add missing pins of isi >> ARM: at91: dts: sama5d3: move the isi mck pin to mb >> >> Josh Wu (5): >> ARM: at91: dts: sama5d3: add isi clock >> ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset} >> ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK >> ARM: at91: dts: sama5d3: add ov2640 camera sensor support >> ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig > Josh, > > It seems that this patch doesn't show up in the series: I only received > up to 6/8 patches (2 missing?). Can you please send it(them?)? Thanks you, Nicolas. I am not aware that. I just sent out the missing 7/8, 8/8 patches right now. Best Regards, Josh Wu > > Bye, > >> arch/arm/boot/dts/sama5d3.dtsi | 24 ++++++++++++++++++----- >> arch/arm/boot/dts/sama5d3xmb.dtsi | 40 +++++++++++++++++++++++++++++++++++---- >> arch/arm/configs/sama5_defconfig | 6 ++++++ >> 3 files changed, 61 insertions(+), 9 deletions(-) >> >