[PATCH 1/2] ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846

[PATCH 1/2] ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846

[Heiko Stübner]

The evaluation board using the act8846 as main pmic uses two additional
regulators to provide the cpu and gpu voltage. Add these and also add
the link to cpu supply from vdd_cpu.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk3288-evb-act8846.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index a76dd44..9db02bbe 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -17,7 +17,32 @@
 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
 &i2c0 {
+	vdd_cpu: syr827 at 40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_gpu: syr828 at 41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+	};
+
 	hym8563 at 51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
-- 
2.1.1

[PATCH 1/2] ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846

[Daniel Lezcano]

On 01/29/2015 11:07 PM, Heiko St?bner wrote:
> The evaluation board using the act8846 as main pmic uses two additional
> regulators to provide the cpu and gpu voltage. Add these and also add
> the link to cpu supply from vdd_cpu.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> ---
>   arch/arm/boot/dts/rk3288-evb-act8846.dts | 25 +++++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
> index a76dd44..9db02bbe 100644
> --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
> +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
> @@ -17,7 +17,32 @@
>   	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
>   };
>
> +&cpu0 {
> +	cpu0-supply = <&vdd_cpu>;
> +};
> +
>   &i2c0 {
> +	vdd_cpu: syr827 at 40 {
> +		compatible = "silergy,syr827";
> +		fcs,suspend-voltage-selector = <1>;
> +		reg = <0x40>;
> +		regulator-name = "vdd_cpu";
> +		regulator-min-microvolt = <850000>;
> +		regulator-max-microvolt = <1350000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	vdd_gpu: syr828 at 41 {
> +		compatible = "silergy,syr828";
> +		fcs,suspend-voltage-selector = <1>;
> +		reg = <0x41>;
> +		regulator-name = "vdd_gpu";
> +		regulator-min-microvolt = <850000>;
> +		regulator-max-microvolt = <1350000>;
> +		regulator-always-on;
> +	};
> +
>   	hym8563 at 51 {
>   		compatible = "haoyu,hym8563";
>   		reg = <0x51>;
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[PATCH 2/2] ARM: dts: rockchip: housekeeping off i2c0 on rk3288-evb boards

[Heiko Stübner]

Use the same transfer speed on both the rk808 and act8846 variants and
remove the status=okay from the rk808 one which is already set in the
shared rk3288-evb.dtsi .

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 ++
 arch/arm/boot/dts/rk3288-evb-rk808.dts   | 1 -
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 9db02bbe..d7b8bbc 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -22,6 +22,8 @@
 };
 
 &i2c0 {
+	clock-frequency = <400000>;
+
 	vdd_cpu: syr827 at 40 {
 		compatible = "silergy,syr827";
 		fcs,suspend-voltage-selector = <1>;
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index d453ddd..3f7aa9e 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -23,7 +23,6 @@
 
 &i2c0 {
 	clock-frequency = <400000>;
-	status = "okay";
 
 	rk808: pmic at 1b {
 		compatible = "rockchip,rk808";
-- 
2.1.1

[PATCH 1/2] ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846

[Heiko Stübner]

Am Donnerstag, 29. Januar 2015, 23:07:47 schrieb Heiko St?bner:
> The evaluation board using the act8846 as main pmic uses two additional
> regulators to provide the cpu and gpu voltage. Add these and also add
> the link to cpu supply from vdd_cpu.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---

added both patches to my dts branch