From: kgene@kernel.org (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/9] Enable HDMI support on Exynos platforms
Date: Wed, 04 Feb 2015 23:50:23 +0900 [thread overview]
Message-ID: <54D231AF.4040903@kernel.org> (raw)
In-Reply-To: <54D1634A.4040300@samsung.com>
On 02/04/15 09:09, Joonyoung Shim wrote:
> Hi,
>
Hi,
> On 02/03/2015 12:58 PM, Kukjin Kim wrote:
>> Marek Szyprowski wrote:
>>>
>>> Hi all,
>>>
>>> This is yet another update on patchset, which enables HDMI support for
>>> Exynos based platforms.
>>>
>>> Beside DTS changes, this patchset adds parent domain support for Exynos
>>> PM domains and add support for 'hdmi' clock directly to Exynos DRM mixer
>>> driver.
>>>
>>> The patchset is based on samsung/for-next branch and 'PM / Domains:
>>> Export of_genpd_get_from_provider function' patch merged as commit
>>> 7496fcbe8a643097efc061160e1c3b65ee2fa350 to v3.19-rc4.
>>>
>>> Regards
>>> Marek Szyprowski
>>>
>>>
>>> Changelog:
>>>
>>> v5:
>>> - fixed error value for clk_get() in mixer patch
>>> - rebased onto samsung/for-next branch
>>>
>>> v4: (http://www.spinics.net/lists/linux-samsung-soc/msg41375.html)
>>> - added patches, which add 'hdmi' clock handling to mixed block, this
>>> finally solves the initialization related issues, thanks for Tobias
>>> Jakobi for testing
>>> - added acks/reviewed/tested by tags
>>>
>>> v3: (http://www.spinics.net/lists/linux-samsung-soc/msg41020.html)
>>> - added a note on defining subdomains to generic PM domain binding
>>> documentation (requested by Ulf Hansson)
>>>
>>> v2: (http://www.spinics.net/lists/linux-samsung-soc/msg40980.html)
>>> - rewrote subdomains patch according to suggestions from Geert
>>> Uytterhoeven and Amit Daniel Kachhap.
>>>
>>> v1 resend: (http://www.spinics.net/lists/linux-samsung-soc/msg39428.html)
>>> - added handling of generic 'power-domains' binding in subdomains
>>>
>>> v1: (http://www.spinics.net/lists/linux-samsung-soc/msg38914.html)
>>> - resolved power domain on/off issue with 'clk: samsung: exynos4: set
>>> parent of mixer gate clock to hdmi' patch
>>>
>>> v0: (http://www.spinics.net/lists/linux-samsung-soc/msg33498.html)
>>> - first attempt, used 'always on' power domains hack
>>>
>>>
>>> Patch summary:
>>>
>>>
>>> *** BLURB HERE ***
>>>
>>> Andrzej Hajda (1):
>>> ARM: dts: exynos5250: add display power domain
>>>
>>> Marek Szyprowski (7):
>>> PM / Domains: Add a note about power domain subdomains
>>> ARM: Exynos: add support for sub-power domains
>>> ARM: dts: exynos4: add hdmi related nodes
>>> ARM: dts: exynos4: add dependency between TV and LCD0 power domains
>>> ARM: dts: exynos4412-odroid: enable hdmi support
>>> ARM: dts: Exynos: add 'hdmi' clock to mixer nodes
>>> drm/exynos: add support for 'hdmi' clock
>>>
>>> Tomasz Stanislawski (1):
>>> ARM: dts: exynos4210-universal_c210: enable hdmi support
>>>
>>> .../bindings/arm/exynos/power_domain.txt | 2 +
>>> .../devicetree/bindings/power/power_domain.txt | 29 +++++++++++
>>> .../devicetree/bindings/video/exynos_mixer.txt | 1 +
>>> arch/arm/boot/dts/exynos4.dtsi | 41 ++++++++++++++++
>>> arch/arm/boot/dts/exynos4210-universal_c210.dts | 57 ++++++++++++++++++++++
>>> arch/arm/boot/dts/exynos4210.dtsi | 8 +++
>>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 44 +++++++++++++++++
>>> arch/arm/boot/dts/exynos4x12.dtsi | 11 +++++
>>> arch/arm/boot/dts/exynos5250.dtsi | 15 +++++-
>>> arch/arm/boot/dts/exynos5420.dtsi | 5 +-
>>> arch/arm/mach-exynos/pm_domains.c | 28 +++++++++++
>>> drivers/gpu/drm/exynos/exynos_mixer.c | 9 ++++
>>> 12 files changed, 246 insertions(+), 4 deletions(-)
>>>
>>> --
>> I have no objection on this series, but just wondering my tree should be fine
>> without 9/9 drm patch and it will be handled for 3.20?
>>
>> I'll take 1 to 8 patches once drm patch is landed for 3.20.
>>
>
> I also hope this patchset merged,
>
> Inki, could you follow up exynos drm part of this patchset?
>
I checked and I'll apply 1 to 8 patches in samsung tree.
Thanks,
Kukjin
prev parent reply other threads:[~2015-02-04 14:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-02 13:20 [PATCH v5 0/9] Enable HDMI support on Exynos platforms Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 1/9] PM / Domains: Add a note about power domain subdomains Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 2/9] ARM: Exynos: add support for sub-power domains Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 3/9] ARM: dts: exynos4: add hdmi related nodes Marek Szyprowski
2015-02-04 14:02 ` [PATCH v5 RESEND " Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 4/9] ARM: dts: exynos4: add dependency between TV and LCD0 power domains Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 5/9] ARM: dts: exynos4412-odroid: enable hdmi support Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 6/9] ARM: dts: exynos4210-universal_c210: " Marek Szyprowski
2015-02-02 13:20 ` [PATCH v5 7/9] ARM: dts: Exynos: add 'hdmi' clock to mixer nodes Marek Szyprowski
2015-02-19 2:42 ` Andreas Färber
2015-02-02 13:20 ` [PATCH v5 8/9] ARM: dts: exynos5250: add display power domain Marek Szyprowski
2015-02-19 2:44 ` Andreas Färber
2015-02-25 12:17 ` Javier Martinez Canillas
2015-02-02 13:20 ` [PATCH v5 9/9] drm/exynos: add support for 'hdmi' clock Marek Szyprowski
2015-02-04 5:13 ` Inki Dae
2015-02-03 3:58 ` [PATCH v5 0/9] Enable HDMI support on Exynos platforms Kukjin Kim
2015-02-04 0:09 ` Joonyoung Shim
2015-02-04 14:50 ` Kukjin Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54D231AF.4040903@kernel.org \
--to=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).