From: al.stone@linaro.org (Al Stone)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 21/21] arm64: ACPI: additions of ACPI documentation for arm64
Date: Wed, 04 Feb 2015 12:06:14 -0700 [thread overview]
Message-ID: <54D26DA6.9000700@linaro.org> (raw)
In-Reply-To: <20150204181229.GB21293@sirena.org.uk>
On 02/04/2015 11:12 AM, Mark Brown wrote:
> On Tue, Feb 03, 2015 at 05:40:20PM -0700, Al Stone wrote:
>> Much removed to cut down the size on this and to highlight a couple of
>> specific sections pertinent to the ACPI on ARMv8 TODO List.....
>
> This is of course good practice when replying to anything!
Yup :).
>>> +_DSD 6.2.5 To be used with caution. If this object is used, try +
>>> to use it within the constraints already defined by the + Device
>>> Properties UUID. Only in rare circumstances + should it be necessary
>>> to create a new _DSD UUID. + + In either case, submit the _DSD
>>> definition along with + any driver patches for discussion, especially
>>> when + device properties are used. A driver will not be +
>>> considered complete without a corresponding _DSD + description. Once
>>> approved by kernel maintainers, + the UUID or device properties must
>>> then be registered + with the UEFI Forum; this may cause some
>>> iteration as + more than one OS will be registering entries.
>
>> [snip...]
>
>> So, this is my attempt to encapsulate what I think people want to have
>> happen around the use of _DSD; I just want to make sure I point it out so
>> it doesn't inadvertently get lost somehow.
>
>> Is this far too little? Is it sufficient? If it only addresses part of
>> the concerns, what did I miss?
>
> This does take us back to the issue of how exactly one is supposed to
> register/approve _DSD bindings and what format they're written in which I
> don't think we ever fully got to the bottom of it (there's some stuff on
> the UEFI website but it's definitely looking a bit placeholderish).
Right; the UEFI stuff is indeed place-holder-ish. This is one of the places
where Linux is really driving what happens in the spec, so it's a little bit
of a chicken-and-egg problem. I will go repair the UEFI data once I have
a better understanding of what's needed.
I guess what I'm trying to figure out is: how specific does this need to be?
Does it need to be a step-by-step description, something like
Documentation/bindings/submitting-patches.txt, or something far more detailed
than that, with templates to fill out, and circles and arrows and a paragraph
on the back explaining each one [0] :)?
[0] http://en.wikipedia.org/wiki/Alice%27s_Restaurant
--
ciao,
al
-----------------------------------
Al Stone
Software Engineer
Linaro Enterprise Group
al.stone at linaro.org
-----------------------------------
next prev parent reply other threads:[~2015-02-04 19:06 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-02 12:45 [PATCH v8 00/21] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 01/21] acpi: add arm64 to the platforms that use ioremap Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 02/21] acpi: fix acpi_os_ioremap for arm64 Hanjun Guo
2015-02-02 22:14 ` Rafael J. Wysocki
2015-02-03 9:08 ` Hanjun Guo
2015-02-03 11:37 ` Catalin Marinas
2015-02-03 11:41 ` Ard Biesheuvel
2015-02-03 17:29 ` Mark Salter
2015-02-03 22:04 ` Rafael J. Wysocki
2015-02-04 10:48 ` Russell King - ARM Linux
2015-02-04 13:22 ` Rafael J. Wysocki
2015-02-04 15:53 ` Bjorn Helgaas
2015-02-04 16:25 ` Russell King - ARM Linux
2015-02-04 16:38 ` David Woodhouse
2015-02-04 16:41 ` Bjorn Helgaas
2015-02-04 11:25 ` Catalin Marinas
2015-02-04 16:08 ` Mark Salter
2015-02-04 16:16 ` Timur Tabi
2015-02-04 17:52 ` Catalin Marinas
2015-02-04 17:57 ` Catalin Marinas
2015-02-04 18:58 ` Mark Salter
2015-02-05 10:41 ` Catalin Marinas
2015-02-05 10:47 ` Ard Biesheuvel
2015-02-05 10:59 ` Catalin Marinas
2015-02-05 11:14 ` Graeme Gregory
2015-02-05 12:07 ` Catalin Marinas
2015-02-05 12:52 ` Graeme Gregory
2015-02-05 14:50 ` Catalin Marinas
2015-02-05 12:55 ` Ard Biesheuvel
2015-02-05 13:54 ` Mark Salter
2015-02-05 16:42 ` [Linaro-acpi] " Al Stone
2015-02-05 17:48 ` Catalin Marinas
2015-02-05 22:16 ` Ard Biesheuvel
2015-02-06 10:36 ` Catalin Marinas
2015-02-06 11:08 ` Ard Biesheuvel
2015-02-06 14:16 ` Catalin Marinas
2015-02-07 1:44 ` Ard Biesheuvel
2015-02-05 1:24 ` Rafael J. Wysocki
2015-02-02 12:45 ` [PATCH v8 03/21] arm64: allow late use of early_ioremap Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 04/21] ARM64 / ACPI: Get RSDP and ACPI boot-time tables Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 05/21] ACPI / sleep: Introduce sleep_arm.c Hanjun Guo
2015-02-02 22:18 ` Rafael J. Wysocki
2015-02-03 16:18 ` Graeme Gregory
2015-02-02 12:45 ` [PATCH v8 06/21] ARM64 / ACPI: Introduce PCI stub functions for ACPI Hanjun Guo
2015-02-03 12:15 ` Catalin Marinas
2015-02-03 13:30 ` Hanjun Guo
2015-02-03 14:55 ` Rafael J. Wysocki
2015-02-04 9:06 ` Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 07/21] ARM64 / ACPI: Introduce early_param for "acpi" and pass acpi=force to enable ACPI Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 08/21] dt / chosen: Add linux, uefi-stub-generated-dtb property Hanjun Guo
2015-02-02 13:40 ` [PATCH v8 08/21] dt / chosen: Add linux,uefi-stub-generated-dtb property Leif Lindholm
2015-02-02 13:50 ` Graeme Gregory
2015-02-02 16:32 ` Mark Rutland
2015-02-06 10:34 ` [PATCH v8 08/21] dt / chosen: Add linux, uefi-stub-generated-dtb property G Gregory
2015-02-07 3:36 ` [PATCH v8 08/21] dt / chosen: Add linux,uefi-stub-generated-dtb property Hanjun Guo
2015-02-07 5:03 ` [PATCH v8 08/21] dt / chosen: Add linux, uefi-stub-generated-dtb property Ard Biesheuvel
2015-02-07 6:51 ` [PATCH v8 08/21] dt / chosen: Add linux,uefi-stub-generated-dtb property Hanjun Guo
2015-02-09 11:46 ` Mark Rutland
2015-02-11 2:44 ` [PATCH v8 08/21] dt / chosen: Add linux, uefi-stub-generated-dtb property Ard Biesheuvel
2015-02-11 6:33 ` [PATCH v8 08/21] dt / chosen: Add linux,uefi-stub-generated-dtb property Stefano Stabellini
2015-02-11 6:53 ` [PATCH v8 08/21] dt / chosen: Add linux, uefi-stub-generated-dtb property Ard Biesheuvel
2015-02-11 7:07 ` [PATCH v8 08/21] dt / chosen: Add linux,uefi-stub-generated-dtb property Stefano Stabellini
2015-02-02 12:45 ` [PATCH v8 09/21] ARM64 / ACPI: Disable ACPI if FADT revision is less than 5.1 Hanjun Guo
2015-02-03 17:20 ` Catalin Marinas
2015-02-04 9:38 ` Hanjun Guo
2015-02-04 13:06 ` Lorenzo Pieralisi
2015-02-05 9:45 ` Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 10/21] ARM64 / ACPI: If we chose to boot from acpi then disable FDT Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 11/21] ARM64 / ACPI: Get PSCI flags in FADT for PSCI init Hanjun Guo
2015-02-04 16:43 ` Lorenzo Pieralisi
2015-02-05 9:48 ` Hanjun Guo
2015-02-05 17:11 ` [Linaro-acpi] " Al Stone
2015-02-05 17:49 ` Lorenzo Pieralisi
2015-02-05 19:03 ` Al Stone
2015-02-06 7:56 ` Hanjun Guo
2015-02-06 16:21 ` Lorenzo Pieralisi
2015-02-02 12:45 ` [PATCH v8 12/21] ACPI / table: Print GIC information when MADT is parsed Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 13/21] ARM64 / ACPI: Parse MADT for SMP initialization Hanjun Guo
2015-02-03 13:53 ` Mark Rutland
2015-02-04 9:05 ` Hanjun Guo
2015-02-04 10:30 ` Mark Rutland
2015-02-05 9:20 ` Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 14/21] ACPI / processor: Make it possible to get CPU hardware ID via GICC Hanjun Guo
2015-02-03 14:17 ` Mark Rutland
2015-02-03 20:09 ` Catalin Marinas
2015-02-04 9:48 ` Hanjun Guo
2015-02-04 11:21 ` Catalin Marinas
2015-02-05 9:27 ` Hanjun Guo
2015-02-05 10:52 ` Catalin Marinas
2015-02-09 6:55 ` Will Deacon
2015-02-09 9:52 ` Catalin Marinas
2015-02-02 12:45 ` [PATCH v8 15/21] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Hanjun Guo
2015-02-09 6:34 ` Will Deacon
2015-02-09 6:53 ` Hanjun Guo
2015-02-09 7:07 ` Will Deacon
2015-02-02 12:45 ` [PATCH v8 16/21] irqchip: Add GICv2 specific ACPI boot support Hanjun Guo
2015-02-02 22:23 ` Rafael J. Wysocki
2015-02-03 15:38 ` Tomasz Nowicki
2015-02-02 12:45 ` [PATCH v8 17/21] clocksource / arch_timer: Parse GTDT to initialize arch timer Hanjun Guo
2015-02-02 22:23 ` Rafael J. Wysocki
2015-02-03 13:28 ` Hanjun Guo
2015-02-04 18:59 ` Lorenzo Pieralisi
2015-02-05 10:11 ` Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 18/21] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 19/21] ARM64 / ACPI: Enable ARM64 in Kconfig Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 20/21] Documentation: ACPI for ARM64 Hanjun Guo
2015-02-02 19:01 ` Timur Tabi
2015-02-03 8:44 ` Hanjun Guo
2015-02-02 12:45 ` [PATCH v8 21/21] arm64: ACPI: additions of ACPI documentation for arm64 Hanjun Guo
2015-02-04 0:40 ` Al Stone
2015-02-04 18:12 ` Mark Brown
2015-02-04 19:06 ` Al Stone [this message]
2015-02-05 2:02 ` Mark Brown
2015-02-03 16:47 ` [PATCH v8 00/21] Introduce ACPI for ARM64 based on ACPI 5.1 Mark Rutland
2015-02-03 17:43 ` [Linaro-acpi] " Al Stone
2015-02-04 9:41 ` Hanjun Guo
2015-02-04 20:29 ` Timur Tabi
2015-02-05 10:16 ` Hanjun Guo
2015-02-12 10:02 ` Robert Richter
2015-02-13 2:48 ` Hanjun Guo
2015-02-19 16:10 ` Robert Richter
[not found] ` <a314cdbbefb349acbb8f47d6e806989f@NASANEXM01D.na.qualcomm.com>
2015-02-13 0:50 ` Jonathan (Zhixiong) Zhang
2015-02-13 7:50 ` Hanjun Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54D26DA6.9000700@linaro.org \
--to=al.stone@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).