From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] ARM: DRA7: add display support
Date: Fri, 13 Feb 2015 10:01:29 -0600 [thread overview]
Message-ID: <54DE1FD9.6030801@ti.com> (raw)
In-Reply-To: <1423840286-18377-1-git-send-email-tomi.valkeinen@ti.com>
On 02/13/2015 09:11 AM, Tomi Valkeinen wrote:
> Hi,
>
> This series adds the arch/arm/ side of the display support for DRA7 (DRA72x,
> DRA74x, AM54xx) SoCs. Also support for HDMI output on x15 and DRA72 EVM boards
> is added.
>
> The series is based on OMAPDSS driver patches in fbdev changes for 3.20, which
> have been merged to Linus' tree.
>
> The changes are very similar to OMAP5 DSS. All the other patches look fine to
> me except the "RFC: ARM: DRA7: enable DSS_DESHDCP_CLKEN". That's been discussed
> earlier with Paul and Tero, but I don't think we have any good solution for it
> yet.
Is there some specific tag I can test this on (some next perhaps?), I
get the following error:
build fail, Error:
arch/arm/mach-omap2/display.c: In function ?omap_display_get_version?:
arch/arm/mach-omap2/display.c:285:10: error: ?OMAPDSS_VER_DRA7xx?
undeclared (first use in this function)
arch/arm/mach-omap2/display.c:285:10: note: each undeclared identifier
is reported only once for each function it appears in
arch/arm/mach-omap2/display.c:288:1: warning: control reaches end of
non-void function [-Wreturn-type]
make[1]: *** [arch/arm/mach-omap2/display.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2
make: *** Waiting for unfinished jobs....
Further are you proposing this for 3.20 or 3.21 window? 3.20, we seem
to have already missed.
>
> Tomi
>
> Tomi Valkeinen (9):
> arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk
^^
> ARM: DRA7: hwmod: add DMM hwmod description
> ARM: DRA7: hwmod: set DSS submodule parent hwmods
> ARM: OMAP: display: change compat names to array
> ARM: OMAP2+: display: detect DRA7 DSS
> arm/dts: dra7.dtsi: add DSS support
^^
> arm/dts: dra72-evm.dts: add HDMI
^^
> arm/dts: am57xx-beagle-x15.dts: add HDMI
ARM: dts: am57xx-beagle-x15: Add HDMI
Would be good to follow above convention for all dts patches $subject.
> RFC: ARM: DRA7: enable DSS_DESHDCP_CLKEN
>
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 80 +++++++++++++++++++++
> arch/arm/boot/dts/dra7.dtsi | 38 ++++++++++
> arch/arm/boot/dts/dra72-evm.dts | 111 ++++++++++++++++++++++++++++++
> arch/arm/boot/dts/dra72x.dtsi | 11 +++
> arch/arm/boot/dts/dra74x.dtsi | 15 ++++
> arch/arm/boot/dts/dra7xx-clocks.dtsi | 1 +
> arch/arm/mach-omap2/display.c | 32 +++++----
> arch/arm/mach-omap2/io.c | 11 +++
> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 32 +++++++++
> 9 files changed, 316 insertions(+), 15 deletions(-)
>
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2015-02-13 16:01 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-13 15:11 [PATCH 0/9] ARM: DRA7: add display support Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 1/9] arm/dts: dra7xx: add 'ti, set-rate-parent' for dss_dss_clk Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 2/9] ARM: DRA7: hwmod: add DMM hwmod description Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 3/9] ARM: DRA7: hwmod: set DSS submodule parent hwmods Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 4/9] ARM: OMAP: display: change compat names to array Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 5/9] ARM: OMAP2+: display: detect DRA7 DSS Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 6/9] arm/dts: dra7.dtsi: add DSS support Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 7/9] arm/dts: dra72-evm.dts: add HDMI Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 8/9] arm/dts: am57xx-beagle-x15.dts: " Tomi Valkeinen
2015-02-13 15:11 ` [PATCH 9/9] RFC: ARM: DRA7: enable DSS_DESHDCP_CLKEN Tomi Valkeinen
2015-02-13 15:25 ` Nishanth Menon
2015-02-13 15:42 ` Tero Kristo
2015-02-20 11:46 ` Tomi Valkeinen
2015-02-20 12:59 ` Tero Kristo
2015-02-20 13:48 ` Tomi Valkeinen
2015-02-20 16:59 ` Tero Kristo
2015-02-16 8:28 ` Tomi Valkeinen
2015-02-13 16:01 ` Nishanth Menon [this message]
2015-02-16 8:30 ` [PATCH 0/9] ARM: DRA7: add display support Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54DE1FD9.6030801@ti.com \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).