From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 00/33] ARM: OMAP2+: PRCM/omap ctrl cleanups against 3.19-rc1
Date: Wed, 25 Feb 2015 20:47:07 +0200 [thread overview]
Message-ID: <54EE18AB.2050402@ti.com> (raw)
In-Reply-To: <20150213183327.GQ2531@atomide.com>
On 02/13/2015 08:33 PM, Tony Lindgren wrote:
> Hi Tero,
>
> * Tero Kristo <t-kristo@ti.com> [150213 08:16]:
>> Hi,
>>
>> Updates since v1:
>>
>> - fixed omap2/am33xx boot issues
>> - added regmap support to generic omap clock core
>> - control module driver converted to use syscon
>
> I made some comments to patch 25 of this series detailing
> how we should limit the syscon usage to the scm_conf register
> area only.
>
>> - dropped patches for removing legacy pad muxing support (this is still
>> needed)
>
> Sounds like this can be moved to the DSS driver using the
> syscon area as long as these are not in the pinctrl-single
> padconf register area. Preferrably implementing some standard
> Linux framework, along the lines pbias-regulator.c is handling
> the SCM register for MMC.
>
I've done some updates/fixes to this set, mostly to address your
comments and rebase it on top of 4.0-rc1. Will be posting a v3 in a bit.
-Tero
prev parent reply other threads:[~2015-02-25 18:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-13 16:12 [PATCHv2 00/33] ARM: OMAP2+: PRCM/omap ctrl cleanups against 3.19-rc1 Tero Kristo
2015-02-13 16:12 ` [PATCHv2 01/33] ARM: OMAP2+: clock: move clock provider infrastructure to clock driver Tero Kristo
2015-02-13 16:12 ` [PATCHv2 02/33] ARM: OMAP2+: PRCM: rename of_prcm_init to omap_prcm_init Tero Kristo
2015-02-13 16:12 ` [PATCHv2 03/33] ARM: OMAP2+: PRCM: split PRCM module init to their own driver files Tero Kristo
2015-02-13 16:12 ` [PATCHv2 06/33] ARM: OMAP3: PRM: invert the wkst_mask for the prm_clear_mod_irqs Tero Kristo
2015-02-13 16:12 ` [PATCHv2 07/33] ARM: OMAP2+: PRM: add generic API for clear_mod_irqs Tero Kristo
2015-02-13 16:12 ` [PATCHv2 09/33] ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone Tero Kristo
2015-02-13 16:12 ` [PATCHv2 10/33] ARM: OMAP4+: PRM: move omap_prm_base_init under OMAP4 PRM driver Tero Kristo
2015-02-13 16:12 ` [PATCHv2 11/33] ARM: OMAP4+: CM: move omap_cm_base_init under OMAP4 CM driver Tero Kristo
2015-02-13 16:12 ` [PATCHv2 12/33] ARM: OMAP2+: clock: add support for static clock memmap indexes Tero Kristo
2015-02-13 16:12 ` [PATCHv2 13/33] ARM: OMAP2+: CM: determine CM base address from device tree Tero Kristo
2015-02-13 16:12 ` [PATCHv2 14/33] ARM: OMAP4: PRM: move omap4xxx_prm_init earlier in init order Tero Kristo
2015-02-13 16:12 ` [PATCHv2 15/33] ARM: OMAP2+: PRM: determine PRM base address from device tree Tero Kristo
2015-02-13 16:12 ` [PATCHv2 16/33] ARM: OMAP2+: control: determine control module base address from DT Tero Kristo
2015-02-13 16:12 ` [PATCHv2 17/33] ARM: OMAP2+: PRM: move SoC specific init calls within a generic API Tero Kristo
2015-02-13 16:12 ` [PATCHv2 18/33] ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility Tero Kristo
2015-02-13 16:12 ` [PATCHv2 19/33] ARM: OMAP2+: CM: move SoC specific init calls within a generic API Tero Kristo
2015-02-13 16:12 ` [PATCHv2 20/33] ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags Tero Kristo
2015-02-13 16:12 ` [PATCHv2 21/33] ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init Tero Kristo
2015-02-13 16:12 ` [PATCHv2 22/33] ARM: OMAP2+: clock: convert low-level clock APIs to use regmap Tero Kristo
2015-02-13 16:12 ` [PATCHv2 23/33] ARM: OMAP2+: control: remove API for getting control module base address Tero Kristo
2015-02-13 16:12 ` [PATCHv2 24/33] ARM: OMAP2+: id: cache omap_type value Tero Kristo
2015-02-13 16:12 ` [PATCHv2 25/33] ARM: dts: am33xx: add syscon support to scrm node Tero Kristo
2015-02-13 18:29 ` Tony Lindgren
2015-02-13 16:12 ` [PATCHv2 26/33] ARM: dts: am4372: add syscon support to control module node Tero Kristo
2015-02-13 16:12 ` [PATCHv2 27/33] ARM: dts: omap24xx: add syscon support to scrm node Tero Kristo
2015-02-13 16:12 ` [PATCHv2 28/33] ARM: dts: omap3: " Tero Kristo
2015-02-13 16:12 ` [PATCHv2 29/33] ARM: OMAP2+: control: convert to use syscon for register accesses Tero Kristo
2015-02-13 16:12 ` [PATCHv2 30/33] ARM: dts: omap4: add nodes for control module core instances Tero Kristo
2015-02-13 16:12 ` [PATCHv2 31/33] ARM: dts: omap5: " Tero Kristo
2015-02-13 16:12 ` [PATCHv2 32/33] ARM: dts: dra7: fix control module core instance nodes Tero Kristo
2015-02-13 16:12 ` [PATCHv2 33/33] ARM: OMAP4+: control: add support for initializing control module via DT Tero Kristo
2015-02-13 18:33 ` [PATCHv2 00/33] ARM: OMAP2+: PRCM/omap ctrl cleanups against 3.19-rc1 Tony Lindgren
2015-02-25 18:47 ` Tero Kristo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EE18AB.2050402@ti.com \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).