* [PATCH] ARM: Kirkwood: add DT description for nas2big @ 2015-03-01 20:51 Simon Guinot 2015-03-03 9:28 ` Gregory CLEMENT 0 siblings, 1 reply; 5+ messages in thread From: Simon Guinot @ 2015-03-01 20:51 UTC (permalink / raw) To: linux-arm-kernel This patch adds the DT description for the LaCie "2Big NAS" (nas2big). This NAS is an hardware upgrade of the 2Big Network v2. Chipset and device list: - CPU Marvell 88F6282 1600Mhz - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz - 1 Ethernet Gigabit port (PHY Marvell 88E1518) - Flash memory, NAND 256MB TSOP48 - I2C EEPROM, 512 bytes (AT24 type) - PCIe SATA controller JMicron JMB360 (eSATA) - I2C fan controller GMT G762 (with a separate alarm GPIO) - 1 USB2 host port - 1 push button - 1 power switch - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) - CPLD for LEDs and start-up management (Altera Max EMP3064) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-nas2big.dts | 144 +++++++++++++++++++++ 3 files changed, 146 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-nas2big.dts diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index 925ecbf6e7b7..4f40ff3fee4b 100644 --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -42,6 +42,7 @@ board. Currently known boards are: "lacie,cloudbox" "lacie,inetspace_v2" "lacie,laplug" +"lacie,nas2big" "lacie,netspace_lite_v2" "lacie,netspace_max_v2" "lacie,netspace_mini_v2" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a1c776b8dcec..920fd9dd7a35 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -165,6 +165,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ + kirkwood-nas2big.dtb \ kirkwood-net2big.dtb \ kirkwood-net5big.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts new file mode 100644 index 000000000000..d459c94fd1d4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -0,0 +1,144 @@ +/* + * Device Tree file for LaCie 2Big NAS + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include <dt-bindings/leds/leds-netxbig.h> +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big NAS"; + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie at 1,0 { + status = "okay"; + }; + }; + }; + + ocp at f1000000 { + rtc at 10300 { + /* The on-chip RTC is not powered (no supercap). */ + status = "disabled"; + }; + spi at 10600 { + /* + * A NAND flash is used instead of an SPI flash for + * the other netxbig-compatible boards. + */ + status = "disabled"; + }; + }; + + fan { + /* + * An I2C fan controller (GMT G762) is used but alarm is + * wired to a separate GPIO. + */ + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator at 2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy at 0 { + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + + /* + * An external I2C RTC (Dallas DS1337S+) is used. This allows + * to power-up the board on an RTC alarm. The external RTC can + * be kept powered, even when the SoC is off. + */ + rtc at 68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + interrupts = <43>; + }; + g762 at 3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; + +&nand { + chip-delay = <50>; + status = "okay"; + + partition at 0 { + label = "U-Boot"; + reg = <0x0 0x100000>; + }; + + partition at 100000 { + label = "uImage"; + reg = <0x100000 0x1000000>; + }; + + partition at 1100000 { + label = "root"; + reg = <0x1100000 0x8000000>; + }; + + partition at 9100000 { + label = "unused"; + reg = <0x9100000 0x6f00000>; + }; +}; -- 2.1.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] ARM: Kirkwood: add DT description for nas2big 2015-03-01 20:51 [PATCH] ARM: Kirkwood: add DT description for nas2big Simon Guinot @ 2015-03-03 9:28 ` Gregory CLEMENT 2015-03-09 9:45 ` Simon Guinot 0 siblings, 1 reply; 5+ messages in thread From: Gregory CLEMENT @ 2015-03-03 9:28 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, On 01/03/2015 21:51, Simon Guinot wrote: > This patch adds the DT description for the LaCie "2Big NAS" (nas2big). > This NAS is an hardware upgrade of the 2Big Network v2. > > Chipset and device list: > > - CPU Marvell 88F6282 1600Mhz > - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz > - 1 Ethernet Gigabit port (PHY Marvell 88E1518) > - Flash memory, NAND 256MB TSOP48 > - I2C EEPROM, 512 bytes (AT24 type) > - PCIe SATA controller JMicron JMB360 (eSATA) > - I2C fan controller GMT G762 (with a separate alarm GPIO) > - 1 USB2 host port > - 1 push button > - 1 power switch > - 2 SATA LEDs (bi-color, blue and red) > - 1 power LED (bi-color, blue and red) > - CPLD for LEDs and start-up management (Altera Max EMP3064) This dts looks fine for me, however I would like to have an Acked-by from Andrew or Jason before applying it as kikwood is not my area of expertise. Thanks, Gregory > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > --- > .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/kirkwood-nas2big.dts | 144 +++++++++++++++++++++ > 3 files changed, 146 insertions(+) > create mode 100644 arch/arm/boot/dts/kirkwood-nas2big.dts > > diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > index 925ecbf6e7b7..4f40ff3fee4b 100644 > --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > @@ -42,6 +42,7 @@ board. Currently known boards are: > "lacie,cloudbox" > "lacie,inetspace_v2" > "lacie,laplug" > +"lacie,nas2big" > "lacie,netspace_lite_v2" > "lacie,netspace_max_v2" > "lacie,netspace_mini_v2" > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index a1c776b8dcec..920fd9dd7a35 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -165,6 +165,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ > kirkwood-lsxhl.dtb \ > kirkwood-mplcec4.dtb \ > kirkwood-mv88f6281gtw-ge.dtb \ > + kirkwood-nas2big.dtb \ > kirkwood-net2big.dtb \ > kirkwood-net5big.dtb \ > kirkwood-netgear_readynas_duo_v2.dtb \ > diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts > new file mode 100644 > index 000000000000..d459c94fd1d4 > --- /dev/null > +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts > @@ -0,0 +1,144 @@ > +/* > + * Device Tree file for LaCie 2Big NAS > + * > + * Copyright (C) 2015 Seagate > + * > + * Author: Simon Guinot <simon.guinot@sequanux.org> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > +*/ > + > +/dts-v1/; > + > +#include <dt-bindings/leds/leds-netxbig.h> > +#include "kirkwood-netxbig.dtsi" > + > +/ { > + model = "LaCie 2Big NAS"; > + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x10000000>; > + }; > + > + chosen { > + bootargs = "console=ttyS0,115200n8"; > + stdout-path = &uart0; > + }; > + > + mbus { > + pcie-controller { > + status = "okay"; > + > + pcie at 1,0 { > + status = "okay"; > + }; > + }; > + }; > + > + ocp at f1000000 { > + rtc at 10300 { > + /* The on-chip RTC is not powered (no supercap). */ > + status = "disabled"; > + }; > + spi at 10600 { > + /* > + * A NAND flash is used instead of an SPI flash for > + * the other netxbig-compatible boards. > + */ > + status = "disabled"; > + }; > + }; > + > + fan { > + /* > + * An I2C fan controller (GMT G762) is used but alarm is > + * wired to a separate GPIO. > + */ > + compatible = "gpio-fan"; > + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; > + }; > + > + regulators: regulators { > + status = "okay"; > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + > + regulator at 2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "hdd1power"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + regulator-always-on; > + regulator-boot-on; > + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; > + }; > + clocks { > + g762_clk: g762-oscillator { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + }; > + }; > + }; > +}; > + > +&mdio { > + status = "okay"; > + > + ethphy0: ethernet-phy at 0 { > + reg = <0>; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + /* > + * An external I2C RTC (Dallas DS1337S+) is used. This allows > + * to power-up the board on an RTC alarm. The external RTC can > + * be kept powered, even when the SoC is off. > + */ > + rtc at 68 { > + compatible = "dallas,ds1307"; > + reg = <0x68>; > + interrupts = <43>; > + }; > + g762 at 3e { > + compatible = "gmt,g762"; > + reg = <0x3e>; > + clocks = <&g762_clk>; > + }; > +}; > + > +&nand { > + chip-delay = <50>; > + status = "okay"; > + > + partition at 0 { > + label = "U-Boot"; > + reg = <0x0 0x100000>; > + }; > + > + partition at 100000 { > + label = "uImage"; > + reg = <0x100000 0x1000000>; > + }; > + > + partition at 1100000 { > + label = "root"; > + reg = <0x1100000 0x8000000>; > + }; > + > + partition at 9100000 { > + label = "unused"; > + reg = <0x9100000 0x6f00000>; > + }; > +}; > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: Kirkwood: add DT description for nas2big 2015-03-03 9:28 ` Gregory CLEMENT @ 2015-03-09 9:45 ` Simon Guinot 2015-03-10 13:16 ` Andrew Lunn 0 siblings, 1 reply; 5+ messages in thread From: Simon Guinot @ 2015-03-09 9:45 UTC (permalink / raw) To: linux-arm-kernel On Tue, Mar 03, 2015 at 10:28:27AM +0100, Gregory CLEMENT wrote: > Hi Simon, > > On 01/03/2015 21:51, Simon Guinot wrote: > > This patch adds the DT description for the LaCie "2Big NAS" (nas2big). > > This NAS is an hardware upgrade of the 2Big Network v2. > > > > Chipset and device list: > > > > - CPU Marvell 88F6282 1600Mhz > > - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz > > - 1 Ethernet Gigabit port (PHY Marvell 88E1518) > > - Flash memory, NAND 256MB TSOP48 > > - I2C EEPROM, 512 bytes (AT24 type) > > - PCIe SATA controller JMicron JMB360 (eSATA) > > - I2C fan controller GMT G762 (with a separate alarm GPIO) > > - 1 USB2 host port > > - 1 push button > > - 1 power switch > > - 2 SATA LEDs (bi-color, blue and red) > > - 1 power LED (bi-color, blue and red) > > - CPLD for LEDs and start-up management (Altera Max EMP3064) > > > This dts looks fine for me, however I would like to have an Acked-by > from Andrew or Jason before applying it as kikwood is not my area of > expertise. Hi Jason and Andrew, What do you think about this DTS file ? Thanks, Simon > > > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > > --- > > .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 + > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/kirkwood-nas2big.dts | 144 +++++++++++++++++++++ > > 3 files changed, 146 insertions(+) > > create mode 100644 arch/arm/boot/dts/kirkwood-nas2big.dts > > > > diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > > index 925ecbf6e7b7..4f40ff3fee4b 100644 > > --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > > +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > > @@ -42,6 +42,7 @@ board. Currently known boards are: > > "lacie,cloudbox" > > "lacie,inetspace_v2" > > "lacie,laplug" > > +"lacie,nas2big" > > "lacie,netspace_lite_v2" > > "lacie,netspace_max_v2" > > "lacie,netspace_mini_v2" > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index a1c776b8dcec..920fd9dd7a35 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -165,6 +165,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ > > kirkwood-lsxhl.dtb \ > > kirkwood-mplcec4.dtb \ > > kirkwood-mv88f6281gtw-ge.dtb \ > > + kirkwood-nas2big.dtb \ > > kirkwood-net2big.dtb \ > > kirkwood-net5big.dtb \ > > kirkwood-netgear_readynas_duo_v2.dtb \ > > diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts > > new file mode 100644 > > index 000000000000..d459c94fd1d4 > > --- /dev/null > > +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts > > @@ -0,0 +1,144 @@ > > +/* > > + * Device Tree file for LaCie 2Big NAS > > + * > > + * Copyright (C) 2015 Seagate > > + * > > + * Author: Simon Guinot <simon.guinot@sequanux.org> > > + * > > + * This file is licensed under the terms of the GNU General Public > > + * License version 2. This program is licensed "as is" without any > > + * warranty of any kind, whether express or implied. > > +*/ > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/leds/leds-netxbig.h> > > +#include "kirkwood-netxbig.dtsi" > > + > > +/ { > > + model = "LaCie 2Big NAS"; > > + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; > > + > > + memory { > > + device_type = "memory"; > > + reg = <0x00000000 0x10000000>; > > + }; > > + > > + chosen { > > + bootargs = "console=ttyS0,115200n8"; > > + stdout-path = &uart0; > > + }; > > + > > + mbus { > > + pcie-controller { > > + status = "okay"; > > + > > + pcie at 1,0 { > > + status = "okay"; > > + }; > > + }; > > + }; > > + > > + ocp at f1000000 { > > + rtc at 10300 { > > + /* The on-chip RTC is not powered (no supercap). */ > > + status = "disabled"; > > + }; > > + spi at 10600 { > > + /* > > + * A NAND flash is used instead of an SPI flash for > > + * the other netxbig-compatible boards. > > + */ > > + status = "disabled"; > > + }; > > + }; > > + > > + fan { > > + /* > > + * An I2C fan controller (GMT G762) is used but alarm is > > + * wired to a separate GPIO. > > + */ > > + compatible = "gpio-fan"; > > + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; > > + }; > > + > > + regulators: regulators { > > + status = "okay"; > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + pinctrl-names = "default"; > > + > > + regulator at 2 { > > + compatible = "regulator-fixed"; > > + reg = <2>; > > + regulator-name = "hdd1power"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + enable-active-high; > > + regulator-always-on; > > + regulator-boot-on; > > + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; > > + }; > > + clocks { > > + g762_clk: g762-oscillator { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <32768>; > > + }; > > + }; > > + }; > > +}; > > + > > +&mdio { > > + status = "okay"; > > + > > + ethphy0: ethernet-phy at 0 { > > + reg = <0>; > > + }; > > +}; > > + > > +&i2c0 { > > + status = "okay"; > > + > > + /* > > + * An external I2C RTC (Dallas DS1337S+) is used. This allows > > + * to power-up the board on an RTC alarm. The external RTC can > > + * be kept powered, even when the SoC is off. > > + */ > > + rtc at 68 { > > + compatible = "dallas,ds1307"; > > + reg = <0x68>; > > + interrupts = <43>; > > + }; > > + g762 at 3e { > > + compatible = "gmt,g762"; > > + reg = <0x3e>; > > + clocks = <&g762_clk>; > > + }; > > +}; > > + > > +&nand { > > + chip-delay = <50>; > > + status = "okay"; > > + > > + partition at 0 { > > + label = "U-Boot"; > > + reg = <0x0 0x100000>; > > + }; > > + > > + partition at 100000 { > > + label = "uImage"; > > + reg = <0x100000 0x1000000>; > > + }; > > + > > + partition at 1100000 { > > + label = "root"; > > + reg = <0x1100000 0x8000000>; > > + }; > > + > > + partition at 9100000 { > > + label = "unused"; > > + reg = <0x9100000 0x6f00000>; > > + }; > > +}; > > > > > -- > Gregory Clement, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150309/acfa4afb/attachment.sig> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: Kirkwood: add DT description for nas2big 2015-03-09 9:45 ` Simon Guinot @ 2015-03-10 13:16 ` Andrew Lunn 2015-03-10 13:39 ` Gregory CLEMENT 0 siblings, 1 reply; 5+ messages in thread From: Andrew Lunn @ 2015-03-10 13:16 UTC (permalink / raw) To: linux-arm-kernel On Mon, Mar 09, 2015 at 10:45:32AM +0100, Simon Guinot wrote: > On Tue, Mar 03, 2015 at 10:28:27AM +0100, Gregory CLEMENT wrote: > > Hi Simon, > > > > On 01/03/2015 21:51, Simon Guinot wrote: > > > This patch adds the DT description for the LaCie "2Big NAS" (nas2big). > > > This NAS is an hardware upgrade of the 2Big Network v2. > > > > > > Chipset and device list: > > > > > > - CPU Marvell 88F6282 1600Mhz > > > - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz > > > - 1 Ethernet Gigabit port (PHY Marvell 88E1518) > > > - Flash memory, NAND 256MB TSOP48 > > > - I2C EEPROM, 512 bytes (AT24 type) > > > - PCIe SATA controller JMicron JMB360 (eSATA) > > > - I2C fan controller GMT G762 (with a separate alarm GPIO) > > > - 1 USB2 host port > > > - 1 push button > > > - 1 power switch > > > - 2 SATA LEDs (bi-color, blue and red) > > > - 1 power LED (bi-color, blue and red) > > > - CPLD for LEDs and start-up management (Altera Max EMP3064) > > > > > > This dts looks fine for me, however I would like to have an Acked-by > > from Andrew or Jason before applying it as kikwood is not my area of > > expertise. > > Hi Jason and Andrew, > > What do you think about this DTS file ? Hi Simon Sorry for taking so long. I've been travelling for the last few weeks. I just took a look at the patch. Nothing jumps out at me as being wrong or needing changes. Acked-by: Andrew Lunn <andrew@lunn.ch> Andrew > > Thanks, > > Simon > > > > > > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > > > --- > > > .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 + > > > arch/arm/boot/dts/Makefile | 1 + > > > arch/arm/boot/dts/kirkwood-nas2big.dts | 144 +++++++++++++++++++++ > > > 3 files changed, 146 insertions(+) > > > create mode 100644 arch/arm/boot/dts/kirkwood-nas2big.dts > > > > > > diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > > > index 925ecbf6e7b7..4f40ff3fee4b 100644 > > > --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > > > +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt > > > @@ -42,6 +42,7 @@ board. Currently known boards are: > > > "lacie,cloudbox" > > > "lacie,inetspace_v2" > > > "lacie,laplug" > > > +"lacie,nas2big" > > > "lacie,netspace_lite_v2" > > > "lacie,netspace_max_v2" > > > "lacie,netspace_mini_v2" > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > > index a1c776b8dcec..920fd9dd7a35 100644 > > > --- a/arch/arm/boot/dts/Makefile > > > +++ b/arch/arm/boot/dts/Makefile > > > @@ -165,6 +165,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ > > > kirkwood-lsxhl.dtb \ > > > kirkwood-mplcec4.dtb \ > > > kirkwood-mv88f6281gtw-ge.dtb \ > > > + kirkwood-nas2big.dtb \ > > > kirkwood-net2big.dtb \ > > > kirkwood-net5big.dtb \ > > > kirkwood-netgear_readynas_duo_v2.dtb \ > > > diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts > > > new file mode 100644 > > > index 000000000000..d459c94fd1d4 > > > --- /dev/null > > > +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts > > > @@ -0,0 +1,144 @@ > > > +/* > > > + * Device Tree file for LaCie 2Big NAS > > > + * > > > + * Copyright (C) 2015 Seagate > > > + * > > > + * Author: Simon Guinot <simon.guinot@sequanux.org> > > > + * > > > + * This file is licensed under the terms of the GNU General Public > > > + * License version 2. This program is licensed "as is" without any > > > + * warranty of any kind, whether express or implied. > > > +*/ > > > + > > > +/dts-v1/; > > > + > > > +#include <dt-bindings/leds/leds-netxbig.h> > > > +#include "kirkwood-netxbig.dtsi" > > > + > > > +/ { > > > + model = "LaCie 2Big NAS"; > > > + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; > > > + > > > + memory { > > > + device_type = "memory"; > > > + reg = <0x00000000 0x10000000>; > > > + }; > > > + > > > + chosen { > > > + bootargs = "console=ttyS0,115200n8"; > > > + stdout-path = &uart0; > > > + }; > > > + > > > + mbus { > > > + pcie-controller { > > > + status = "okay"; > > > + > > > + pcie at 1,0 { > > > + status = "okay"; > > > + }; > > > + }; > > > + }; > > > + > > > + ocp at f1000000 { > > > + rtc at 10300 { > > > + /* The on-chip RTC is not powered (no supercap). */ > > > + status = "disabled"; > > > + }; > > > + spi at 10600 { > > > + /* > > > + * A NAND flash is used instead of an SPI flash for > > > + * the other netxbig-compatible boards. > > > + */ > > > + status = "disabled"; > > > + }; > > > + }; > > > + > > > + fan { > > > + /* > > > + * An I2C fan controller (GMT G762) is used but alarm is > > > + * wired to a separate GPIO. > > > + */ > > > + compatible = "gpio-fan"; > > > + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; > > > + }; > > > + > > > + regulators: regulators { > > > + status = "okay"; > > > + compatible = "simple-bus"; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + pinctrl-names = "default"; > > > + > > > + regulator at 2 { > > > + compatible = "regulator-fixed"; > > > + reg = <2>; > > > + regulator-name = "hdd1power"; > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5000000>; > > > + enable-active-high; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; > > > + }; > > > + clocks { > > > + g762_clk: g762-oscillator { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <32768>; > > > + }; > > > + }; > > > + }; > > > +}; > > > + > > > +&mdio { > > > + status = "okay"; > > > + > > > + ethphy0: ethernet-phy at 0 { > > > + reg = <0>; > > > + }; > > > +}; > > > + > > > +&i2c0 { > > > + status = "okay"; > > > + > > > + /* > > > + * An external I2C RTC (Dallas DS1337S+) is used. This allows > > > + * to power-up the board on an RTC alarm. The external RTC can > > > + * be kept powered, even when the SoC is off. > > > + */ > > > + rtc at 68 { > > > + compatible = "dallas,ds1307"; > > > + reg = <0x68>; > > > + interrupts = <43>; > > > + }; > > > + g762 at 3e { > > > + compatible = "gmt,g762"; > > > + reg = <0x3e>; > > > + clocks = <&g762_clk>; > > > + }; > > > +}; > > > + > > > +&nand { > > > + chip-delay = <50>; > > > + status = "okay"; > > > + > > > + partition at 0 { > > > + label = "U-Boot"; > > > + reg = <0x0 0x100000>; > > > + }; > > > + > > > + partition at 100000 { > > > + label = "uImage"; > > > + reg = <0x100000 0x1000000>; > > > + }; > > > + > > > + partition at 1100000 { > > > + label = "root"; > > > + reg = <0x1100000 0x8000000>; > > > + }; > > > + > > > + partition at 9100000 { > > > + label = "unused"; > > > + reg = <0x9100000 0x6f00000>; > > > + }; > > > +}; > > > > > > > > > -- > > Gregory Clement, Free Electrons > > Kernel, drivers, real-time and embedded Linux > > development, consulting, training and support. > > http://free-electrons.com > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel at lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: Kirkwood: add DT description for nas2big 2015-03-10 13:16 ` Andrew Lunn @ 2015-03-10 13:39 ` Gregory CLEMENT 0 siblings, 0 replies; 5+ messages in thread From: Gregory CLEMENT @ 2015-03-10 13:39 UTC (permalink / raw) To: linux-arm-kernel On 10/03/2015 14:16, Andrew Lunn wrote: > On Mon, Mar 09, 2015 at 10:45:32AM +0100, Simon Guinot wrote: >> On Tue, Mar 03, 2015 at 10:28:27AM +0100, Gregory CLEMENT wrote: >>> Hi Simon, >>> >>> On 01/03/2015 21:51, Simon Guinot wrote: >>>> This patch adds the DT description for the LaCie "2Big NAS" (nas2big). >>>> This NAS is an hardware upgrade of the 2Big Network v2. >>>> >>>> Chipset and device list: >>>> >>>> - CPU Marvell 88F6282 1600Mhz >>>> - SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz >>>> - 1 Ethernet Gigabit port (PHY Marvell 88E1518) >>>> - Flash memory, NAND 256MB TSOP48 >>>> - I2C EEPROM, 512 bytes (AT24 type) >>>> - PCIe SATA controller JMicron JMB360 (eSATA) >>>> - I2C fan controller GMT G762 (with a separate alarm GPIO) >>>> - 1 USB2 host port >>>> - 1 push button >>>> - 1 power switch >>>> - 2 SATA LEDs (bi-color, blue and red) >>>> - 1 power LED (bi-color, blue and red) >>>> - CPLD for LEDs and start-up management (Altera Max EMP3064) >>> >>> >>> This dts looks fine for me, however I would like to have an Acked-by >>> from Andrew or Jason before applying it as kikwood is not my area of >>> expertise. >> >> Hi Jason and Andrew, >> >> What do you think about this DTS file ? > > Hi Simon > > Sorry for taking so long. I've been travelling for the last few weeks. > > I just took a look at the patch. Nothing jumps out at me as being > wrong or needing changes. > > Acked-by: Andrew Lunn <andrew@lunn.ch> > applied on mvebu/dt with Andrew Acked-by Thanks, Gregory > Andrew > >> >> Thanks, >> >> Simon >> >>>> >>>> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> >>>> --- >>>> .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 + >>>> arch/arm/boot/dts/Makefile | 1 + >>>> arch/arm/boot/dts/kirkwood-nas2big.dts | 144 +++++++++++++++++++++ >>>> 3 files changed, 146 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/kirkwood-nas2big.dts >>>> >>>> diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt >>>> index 925ecbf6e7b7..4f40ff3fee4b 100644 >>>> --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt >>>> +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt >>>> @@ -42,6 +42,7 @@ board. Currently known boards are: >>>> "lacie,cloudbox" >>>> "lacie,inetspace_v2" >>>> "lacie,laplug" >>>> +"lacie,nas2big" >>>> "lacie,netspace_lite_v2" >>>> "lacie,netspace_max_v2" >>>> "lacie,netspace_mini_v2" >>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>> index a1c776b8dcec..920fd9dd7a35 100644 >>>> --- a/arch/arm/boot/dts/Makefile >>>> +++ b/arch/arm/boot/dts/Makefile >>>> @@ -165,6 +165,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ >>>> kirkwood-lsxhl.dtb \ >>>> kirkwood-mplcec4.dtb \ >>>> kirkwood-mv88f6281gtw-ge.dtb \ >>>> + kirkwood-nas2big.dtb \ >>>> kirkwood-net2big.dtb \ >>>> kirkwood-net5big.dtb \ >>>> kirkwood-netgear_readynas_duo_v2.dtb \ >>>> diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts >>>> new file mode 100644 >>>> index 000000000000..d459c94fd1d4 >>>> --- /dev/null >>>> +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts >>>> @@ -0,0 +1,144 @@ >>>> +/* >>>> + * Device Tree file for LaCie 2Big NAS >>>> + * >>>> + * Copyright (C) 2015 Seagate >>>> + * >>>> + * Author: Simon Guinot <simon.guinot@sequanux.org> >>>> + * >>>> + * This file is licensed under the terms of the GNU General Public >>>> + * License version 2. This program is licensed "as is" without any >>>> + * warranty of any kind, whether express or implied. >>>> +*/ >>>> + >>>> +/dts-v1/; >>>> + >>>> +#include <dt-bindings/leds/leds-netxbig.h> >>>> +#include "kirkwood-netxbig.dtsi" >>>> + >>>> +/ { >>>> + model = "LaCie 2Big NAS"; >>>> + compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; >>>> + >>>> + memory { >>>> + device_type = "memory"; >>>> + reg = <0x00000000 0x10000000>; >>>> + }; >>>> + >>>> + chosen { >>>> + bootargs = "console=ttyS0,115200n8"; >>>> + stdout-path = &uart0; >>>> + }; >>>> + >>>> + mbus { >>>> + pcie-controller { >>>> + status = "okay"; >>>> + >>>> + pcie at 1,0 { >>>> + status = "okay"; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + ocp at f1000000 { >>>> + rtc at 10300 { >>>> + /* The on-chip RTC is not powered (no supercap). */ >>>> + status = "disabled"; >>>> + }; >>>> + spi at 10600 { >>>> + /* >>>> + * A NAND flash is used instead of an SPI flash for >>>> + * the other netxbig-compatible boards. >>>> + */ >>>> + status = "disabled"; >>>> + }; >>>> + }; >>>> + >>>> + fan { >>>> + /* >>>> + * An I2C fan controller (GMT G762) is used but alarm is >>>> + * wired to a separate GPIO. >>>> + */ >>>> + compatible = "gpio-fan"; >>>> + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; >>>> + }; >>>> + >>>> + regulators: regulators { >>>> + status = "okay"; >>>> + compatible = "simple-bus"; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + pinctrl-names = "default"; >>>> + >>>> + regulator at 2 { >>>> + compatible = "regulator-fixed"; >>>> + reg = <2>; >>>> + regulator-name = "hdd1power"; >>>> + regulator-min-microvolt = <5000000>; >>>> + regulator-max-microvolt = <5000000>; >>>> + enable-active-high; >>>> + regulator-always-on; >>>> + regulator-boot-on; >>>> + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; >>>> + }; >>>> + clocks { >>>> + g762_clk: g762-oscillator { >>>> + compatible = "fixed-clock"; >>>> + #clock-cells = <0>; >>>> + clock-frequency = <32768>; >>>> + }; >>>> + }; >>>> + }; >>>> +}; >>>> + >>>> +&mdio { >>>> + status = "okay"; >>>> + >>>> + ethphy0: ethernet-phy at 0 { >>>> + reg = <0>; >>>> + }; >>>> +}; >>>> + >>>> +&i2c0 { >>>> + status = "okay"; >>>> + >>>> + /* >>>> + * An external I2C RTC (Dallas DS1337S+) is used. This allows >>>> + * to power-up the board on an RTC alarm. The external RTC can >>>> + * be kept powered, even when the SoC is off. >>>> + */ >>>> + rtc at 68 { >>>> + compatible = "dallas,ds1307"; >>>> + reg = <0x68>; >>>> + interrupts = <43>; >>>> + }; >>>> + g762 at 3e { >>>> + compatible = "gmt,g762"; >>>> + reg = <0x3e>; >>>> + clocks = <&g762_clk>; >>>> + }; >>>> +}; >>>> + >>>> +&nand { >>>> + chip-delay = <50>; >>>> + status = "okay"; >>>> + >>>> + partition at 0 { >>>> + label = "U-Boot"; >>>> + reg = <0x0 0x100000>; >>>> + }; >>>> + >>>> + partition at 100000 { >>>> + label = "uImage"; >>>> + reg = <0x100000 0x1000000>; >>>> + }; >>>> + >>>> + partition at 1100000 { >>>> + label = "root"; >>>> + reg = <0x1100000 0x8000000>; >>>> + }; >>>> + >>>> + partition at 9100000 { >>>> + label = "unused"; >>>> + reg = <0x9100000 0x6f00000>; >>>> + }; >>>> +}; >>>> >>> >>> >>> -- >>> Gregory Clement, Free Electrons >>> Kernel, drivers, real-time and embedded Linux >>> development, consulting, training and support. >>> http://free-electrons.com >>> >>> _______________________________________________ >>> linux-arm-kernel mailing list >>> linux-arm-kernel at lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-03-10 13:39 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-03-01 20:51 [PATCH] ARM: Kirkwood: add DT description for nas2big Simon Guinot 2015-03-03 9:28 ` Gregory CLEMENT 2015-03-09 9:45 ` Simon Guinot 2015-03-10 13:16 ` Andrew Lunn 2015-03-10 13:39 ` Gregory CLEMENT
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).