[PATCH] ARM: at91: remove ksz8081 phy fixup registration for sama5d4ek board

[nicolas.ferre@atmel.com (Nicolas Ferre)]

Le 06/03/2015 09:24, Nicolas Ferre a ?crit :
> Le 06/03/2015 00:37, Alexandre Belloni a ?crit :
>> On 04/03/2015 at 12:35:23 +0100, Alexandre Belloni wrote :
>>> On 04/03/2015 at 12:20:12 +0100, Boris Brezillon wrote :
>>>> Commit 2b0ba96cea60 ("net: phy: micrel: disable NAND-tree for KSZ8021,
>>>> KSZ8031, KSZ8051, KSZ8081") automated the NAND-tree mode deactivation
>>>> process, thus making this phy fixup useless.
>>>> Remove it along with the associated headers inclusion.
>>>>
>>>> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>>> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> 
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> 
>> Actually, as Rob pointed out in my patch series, please remove the
>> selection of PHYLIB in the Kconfig.
> 
> Ok, I do it when I queue this patch in at91-4.1-cleanup (aka no need to
> re-send).

In at91-4.1-cleanup now. Thanks!

Bye,

>>>> ---
>>>>  arch/arm/mach-at91/sama5.c | 20 --------------------
>>>>  1 file changed, 20 deletions(-)
>>>>
>>>> diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
>>>> index 03dcb44..23d067a 100644
>>>> --- a/arch/arm/mach-at91/sama5.c
>>>> +++ b/arch/arm/mach-at91/sama5.c
>>>> @@ -11,13 +11,10 @@
>>>>  #include <linux/init.h>
>>>>  #include <linux/module.h>
>>>>  #include <linux/gpio.h>
>>>> -#include <linux/micrel_phy.h>
>>>>  #include <linux/of.h>
>>>>  #include <linux/of_irq.h>
>>>>  #include <linux/of_platform.h>
>>>> -#include <linux/phy.h>
>>>>  #include <linux/clk-provider.h>
>>>> -#include <linux/phy.h>
>>>>  
>>>>  #include <mach/hardware.h>
>>>>  
>>>> @@ -29,25 +26,8 @@
>>>>  
>>>>  #include "generic.h"
>>>>  
>>>> -static int ksz8081_phy_fixup(struct phy_device *phy)
>>>> -{
>>>> -	int value;
>>>> -
>>>> -	value = phy_read(phy, 0x16);
>>>> -	value &= ~0x20;
>>>> -	phy_write(phy, 0x16, value);
>>>> -
>>>> -	return 0;
>>>> -}
>>>> -
>>>>  static void __init sama5_dt_device_init(void)
>>>>  {
>>>> -	if (of_machine_is_compatible("atmel,sama5d4ek") &&
>>>> -	   IS_ENABLED(CONFIG_PHYLIB)) {
>>>> -		phy_register_fixup_for_id("fc028000.etherne:00",
>>>> -						ksz8081_phy_fixup);
>>>> -	}
>>>> -
>>>>  	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>>>>  	at91sam9x5_pm_init();
>>>>  }
>>>> -- 
>>>> 1.9.1
>>>>
>>>
>>> -- 
>>> Alexandre Belloni, Free Electrons
>>> Embedded Linux, Kernel and Android engineering
>>> http://free-electrons.com
>>
> 
> 


-- 
Nicolas Ferre