From: alexander.sverdlin@nokia.com (Alexander Sverdlin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
Date: Thu, 12 Mar 2015 12:32:19 +0100 [thread overview]
Message-ID: <55017943.6040603@nokia.com> (raw)
In-Reply-To: <1417448047-15236-4-git-send-email-grygorii.strashko@ti.com>
Hi!
On 01/12/14 16:34, Grygorii Strashko wrote:
> This patch changes type of input parameter for .prepare/unprepare_recovery()
> callbacks from struct i2c_bus_recovery_info * to struct i2c_adapter *.
> This allows to simplify implementation of these callbacks and avoid
> type conversations from i2c_bus_recovery_info to i2c_adapter.
> The i2c_bus_recovery_info can be simply retrieved from struct i2c_adapter
> which contains pointer on it.
>
> CC: Sekhar Nori <nsekhar@ti.com>
> CC: Kevin Hilman <khilman@deeprootsystems.com>
> CC: Santosh Shilimkar <ssantosh@kernel.org>
> CC: Murali Karicheri <m-karicheri2@ti.com>
> Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> drivers/i2c/i2c-core.c | 4 ++--
> include/linux/i2c.h | 4 ++--
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index 2f90ac6..72b6e34 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -563,7 +563,7 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
> int i = 0, val = 1, ret = 0;
>
> if (bri->prepare_recovery)
> - bri->prepare_recovery(bri);
> + bri->prepare_recovery(adap);
>
> /*
> * By this time SCL is high, as we need to give 9 falling-rising edges
> @@ -588,7 +588,7 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
> }
>
> if (bri->unprepare_recovery)
> - bri->unprepare_recovery(bri);
> + bri->unprepare_recovery(adap);
>
> return ret;
> }
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index b556e0a..cf9380f 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -404,8 +404,8 @@ struct i2c_bus_recovery_info {
> void (*set_scl)(struct i2c_adapter *, int val);
> int (*get_sda)(struct i2c_adapter *);
>
> - void (*prepare_recovery)(struct i2c_bus_recovery_info *bri);
> - void (*unprepare_recovery)(struct i2c_bus_recovery_info *bri);
> + void (*prepare_recovery)(struct i2c_adapter *);
> + void (*unprepare_recovery)(struct i2c_adapter *);
>
> /* gpio recovery */
> int scl_gpio;
>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
--
Best regards,
Alexander Sverdlin.
Sent from my pdp-11
next prev parent reply other threads:[~2015-03-12 11:32 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-01 15:34 [PATCH v3 0/5] i2c: davinci improvements and fixes Grygorii Strashko
2014-12-01 15:34 ` [PATCH v3 1/5] i2c: i2c-davinci: switch to use platform_get_irq Grygorii Strashko
2014-12-04 18:28 ` Wolfram Sang
2014-12-01 15:34 ` [PATCH v3 2/5] i2c: davinci: generate STP always when NACK is received Grygorii Strashko
2014-12-04 18:28 ` Wolfram Sang
2014-12-01 15:34 ` [PATCH v3 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery Grygorii Strashko
2014-12-04 18:29 ` Wolfram Sang
2015-03-05 18:41 ` Grygorii Strashko
2015-03-12 11:32 ` Alexander Sverdlin [this message]
2015-03-13 10:15 ` Grygorii.Strashko@linaro.org
2015-03-13 15:45 ` Felipe Balbi
2014-12-01 15:34 ` [PATCH v3 4/5] i2c: davinci: use bus recovery infrastructure Grygorii Strashko
2015-03-12 11:45 ` Alexander Sverdlin
2015-03-18 20:31 ` Wolfram Sang
2015-03-20 18:32 ` Grygorii.Strashko@linaro.org
2015-04-03 20:18 ` Wolfram Sang
2015-04-06 13:11 ` Grygorii.Strashko@linaro.org
2015-04-06 16:09 ` Wolfram Sang
2015-04-06 16:28 ` Grygorii.Strashko@linaro.org
2014-12-01 15:34 ` [PATCH 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery Grygorii Strashko
2015-04-01 14:38 ` Alexander Sverdlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55017943.6040603@nokia.com \
--to=alexander.sverdlin@nokia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).