[PATCH v5 00/10] Atmel System Timer cleanups

[daniel.lezcano@linaro.org (Daniel Lezcano)]

On 03/12/2015 01:07 PM, Alexandre Belloni wrote:
> This patch set cleans up the system timer driver.
>
> The main goal is to get rid of the mach/ headers dependency. At the same time,
> it introduces proper probing and locking (using a regmap) for the watchdog
> driver.
>
> This is based on 4.0-rc1 and will have two merge conflicts with my cleanup #1 in
> mach-at91/at91rm9200.c
>
> It also needs this patch to probe the watchdog properly:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/327274.html


Hi Alexandre,

through which tree do you want this patchset to be merged ?

Thanks
   -- Daniel

> Changes in v5:
>   - Documented the watchdog compatible
>   - Switched to simple-mfd to probe the system timer subnodes
>   - Selected ATMEL_ST from mach-at91/Kconfig instead of using def_bool SOC_AT91RM9200
>   - Reordered the atmel-st probe cleanup and its move to driver/clocksource
>   - Added a patch to replace setup_irq by request_irq
>   - Merged the reset handling in the watchdog timer as we are using the watchdog
>     anyway to reset the board.
>   - Used a simple space after a #define for registers
>
> Changes in v4:
>   - Added MODULE_* metadata in at91rm9200-reset
>   - Proper copyright in at91rm9200-reset
>   - Use BIT() in atmel-st.h
>   - changed MODULE_ALIAS in at91rm9200_wdt.c
>
> Changes in v3:
>   - stop using an mfd and get the syscon directly from the watchdog driver
>   - introduce a proper reset driver to handle reset
>
> Changes in v2:
>   - cleaned up more includes in the watchdog driver
>   - stop using if OF when selecting CLKSRC_OF
>   - stop initializing .owner
>
>
> Alexandre Belloni (10):
>    ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
>    mfd: syscon: Add atmel system timer registers definition
>    watchdog: at91rm9200: use the system timer syscon
>    watchdog: at91rm9200: implement restart handler
>    ARM: at91: at91rm9200: remove deprecated arm_pm_restart
>    ARM: at91: properly initialize timer
>    ARM: at91: time: move the system timer driver to drivers/clocksource
>    clocksource: atmel-st: use syscon/regmap
>    clocksource: atmel-st: remove mach/hardware dependency
>    ARM: at91: remove useless include
>
>   .../devicetree/bindings/arm/atmel-at91.txt         |   4 +-
>   arch/arm/boot/dts/at91rm9200.dtsi                  |   6 +-
>   arch/arm/mach-at91/Kconfig                         |   1 +
>   arch/arm/mach-at91/Makefile                        |   2 +-
>   arch/arm/mach-at91/at91rm9200.c                    |  19 ----
>   arch/arm/mach-at91/generic.h                       |   3 -
>   arch/arm/mach-at91/include/mach/at91_st.h          |  61 -----------
>   drivers/clocksource/Kconfig                        |   4 +
>   drivers/clocksource/Makefile                       |   1 +
>   .../clocksource/timer-atmel-st.c                   | 115 ++++++++-------------
>   drivers/watchdog/Kconfig                           |   2 +-
>   drivers/watchdog/at91rm9200_wdt.c                  |  61 +++++++++--
>   include/linux/mfd/syscon/atmel-st.h                |  49 +++++++++
>   13 files changed, 164 insertions(+), 164 deletions(-)
>   delete mode 100644 arch/arm/mach-at91/include/mach/at91_st.h
>   rename arch/arm/mach-at91/at91rm9200_time.c => drivers/clocksource/timer-atmel-st.c (74%)
>   create mode 100644 include/linux/mfd/syscon/atmel-st.h
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog