* [PATCH v2 1/7] ARM: at91: switch to multiplatform
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
2015-03-05 22:50 ` Rob Herring
2015-03-05 19:17 ` [PATCH v2 2/7] ARM: at91: switch at91_dt_defconfig " Alexandre Belloni
` (5 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
Switch AT91 to multiplatform as all SoCs are properly handled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/Kconfig | 13 -----
arch/arm/mach-at91/Kconfig | 117 +++++++++++++++++++++++---------------------
arch/arm/mach-at91/Makefile | 2 +
3 files changed, 62 insertions(+), 70 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f6c5b05e8de8..a1d153098001 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -356,19 +356,6 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91
- bool "Atmel AT91"
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select IRQ_DOMAIN
- select PINCTRL
- select PINCTRL_AT91
- select SOC_BUS
- select USE_OF
- help
- This enables support for systems based on Atmel
- AT91RM9200, AT91SAM9 and SAMA5 processors.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7ecde7de69da..1b8525c324c3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,51 +1,22 @@
-if ARCH_AT91
-
-config HAVE_AT91_UTMI
- bool
-
-config HAVE_AT91_USB_CLK
- bool
-
-config COMMON_CLK_AT91
- bool
- select COMMON_CLK
-
-config HAVE_AT91_SMD
- bool
-
-config HAVE_AT91_H32MX
- bool
-
-config SOC_SAMA5
+config ARCH_AT91
bool
- select ATMEL_AIC5_IRQ
+ select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK_AT91
- select CPU_V7
+ select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
- select MEMORY
- select ATMEL_SDRAMC
- select PHYLIB if NETDEVICES
-
-menu "Atmel AT91 System-on-Chip"
-
-choice
-
- prompt "Core type"
-
-config SOC_SAM_V4_V5
- bool "ARM9 AT91SAM9/AT91RM9200"
- help
- Select this if you are using one of Atmel's AT91SAM9 or
- AT91RM9200 SoC.
-
-config SOC_SAM_V7
- bool "Cortex A5"
+ select IRQ_DOMAIN
+ select NEED_MACH_IO_H if PCCARD
+ select PINCTRL
+ select PINCTRL_AT91
+ select SOC_BUS
+ select USE_OF
+
+menuconfig SOC_SAM_V7
+ bool "Atmel SAMA5" if ARCH_MULTI_V7
+ select ARCH_AT91
help
- Select this if you are using one of Atmel's SAMA5D3 SoC.
-
-endchoice
-
-comment "Atmel AT91 Processor"
+ This enables support for systems based on Atmel
+ SAMA5D3 or SAMA5D4 SoCs.
if SOC_SAM_V7
config SOC_SAMA5D3
@@ -71,25 +42,29 @@ config SOC_SAMA5D4
select HAVE_AT91_H32MX
help
Select this if you are using one of Atmel's SAMA5D4 family SoC.
-endif
+endif # SOC_SAM_V7
+
+
+menuconfig SOC_SAM_V4_V5
+ bool "Atmel ARM9 AT91SAM9/AT91RM9200" if ARCH_MULTI_V4_V5
+ select ARCH_AT91
+ help
+ Select this if you are using one of Atmel's AT91SAM9 or
+ AT91RM9200 SoC.
if SOC_SAM_V4_V5
config SOC_AT91RM9200
- bool "AT91RM9200"
+ bool "AT91RM9200" if ARCH_MULTI_V4T
select ATMEL_AIC_IRQ
- select COMMON_CLK_AT91
select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
select HAVE_AT91_USB_CLK
select MIGHT_HAVE_PCI
config SOC_AT91SAM9
- bool "AT91SAM9"
+ bool "AT91SAM9" if ARCH_MULTI_V5
select ATMEL_AIC_IRQ
select ATMEL_SDRAMC
- select COMMON_CLK_AT91
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
select HAVE_AT91_UTMI
@@ -115,6 +90,34 @@ config SOC_AT91SAM9
AT91SAM9XE
endif # SOC_SAM_V4_V5
+if ARCH_AT91
+
+config HAVE_AT91_UTMI
+ bool
+
+config HAVE_AT91_USB_CLK
+ bool
+
+config COMMON_CLK_AT91
+ bool
+ select COMMON_CLK
+
+config HAVE_AT91_SMD
+ bool
+
+config HAVE_AT91_H32MX
+ bool
+
+config SOC_SAMA5
+ bool
+ select ATMEL_AIC5_IRQ
+ select CPU_V7
+ select MEMORY
+ select ATMEL_SDRAMC
+ select PHYLIB if NETDEVICES
+
+menu "Atmel AT91 common options"
+
comment "AT91 Feature Selections"
config AT91_SLOW_CLOCK
@@ -132,12 +135,12 @@ config AT91_SLOW_CLOCK
need to be completely re-initialized.
config AT91_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
- depends on ARCH_AT91
- default "128" if SOC_AT91RM9200
- default "100"
- help
+ int "Kernel HZ (jiffies per second)"
+ range 32 1024
+ depends on ARCH_AT91
+ default "128" if SOC_AT91RM9200
+ default "100"
+ help
On AT91rm9200 chips where you're using a system clock derived
from the 32768 Hz hardware clock, this tick rate should divide
it exactly: use a power-of-two value, such as 128 or 256, to
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 999f12dbdd16..e51170eeaacd 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,6 +1,8 @@
#
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
obj-y := soc.o
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 1/7] ARM: at91: switch to multiplatform
2015-03-05 19:17 ` [PATCH v2 1/7] ARM: at91: switch " Alexandre Belloni
@ 2015-03-05 22:50 ` Rob Herring
2015-03-05 23:35 ` Alexandre Belloni
0 siblings, 1 reply; 12+ messages in thread
From: Rob Herring @ 2015-03-05 22:50 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 5, 2015 at 1:17 PM, Alexandre Belloni
<alexandre.belloni@free-electrons.com> wrote:
> Switch AT91 to multiplatform as all SoCs are properly handled.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> arch/arm/Kconfig | 13 -----
> arch/arm/mach-at91/Kconfig | 117 +++++++++++++++++++++++---------------------
> arch/arm/mach-at91/Makefile | 2 +
> 3 files changed, 62 insertions(+), 70 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index f6c5b05e8de8..a1d153098001 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -356,19 +356,6 @@ config ARCH_VERSATILE
> help
> This enables support for ARM Ltd Versatile board.
>
> -config ARCH_AT91
> - bool "Atmel AT91"
> - select ARCH_REQUIRE_GPIOLIB
> - select CLKDEV_LOOKUP
> - select IRQ_DOMAIN
> - select PINCTRL
> - select PINCTRL_AT91
> - select SOC_BUS
> - select USE_OF
> - help
> - This enables support for systems based on Atmel
> - AT91RM9200, AT91SAM9 and SAMA5 processors.
> -
> config ARCH_CLPS711X
> bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
> select ARCH_REQUIRE_GPIOLIB
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 7ecde7de69da..1b8525c324c3 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -1,51 +1,22 @@
> -if ARCH_AT91
> -
> -config HAVE_AT91_UTMI
> - bool
> -
> -config HAVE_AT91_USB_CLK
> - bool
> -
> -config COMMON_CLK_AT91
> - bool
> - select COMMON_CLK
> -
> -config HAVE_AT91_SMD
> - bool
> -
> -config HAVE_AT91_H32MX
> - bool
> -
> -config SOC_SAMA5
> +config ARCH_AT91
> bool
> - select ATMEL_AIC5_IRQ
> + select ARCH_REQUIRE_GPIOLIB
> select COMMON_CLK_AT91
> - select CPU_V7
> + select CLKDEV_LOOKUP
This is already selected by COMMON_CLK I think.
> select GENERIC_CLOCKEVENTS
This is already selected.
> - select MEMORY
> - select ATMEL_SDRAMC
> - select PHYLIB if NETDEVICES
> -
> -menu "Atmel AT91 System-on-Chip"
> -
> -choice
> -
> - prompt "Core type"
> -
> -config SOC_SAM_V4_V5
> - bool "ARM9 AT91SAM9/AT91RM9200"
> - help
> - Select this if you are using one of Atmel's AT91SAM9 or
> - AT91RM9200 SoC.
> -
> -config SOC_SAM_V7
> - bool "Cortex A5"
> + select IRQ_DOMAIN
> + select NEED_MACH_IO_H if PCCARD
This won't work on multi-platform.
> + select PINCTRL
> + select PINCTRL_AT91
> + select SOC_BUS
> + select USE_OF
This is already selected.
> +
> +menuconfig SOC_SAM_V7
> + bool "Atmel SAMA5" if ARCH_MULTI_V7
> + select ARCH_AT91
> help
> - Select this if you are using one of Atmel's SAMA5D3 SoC.
> -
> -endchoice
> -
> -comment "Atmel AT91 Processor"
> + This enables support for systems based on Atmel
> + SAMA5D3 or SAMA5D4 SoCs.
>
> if SOC_SAM_V7
> config SOC_SAMA5D3
> @@ -71,25 +42,29 @@ config SOC_SAMA5D4
> select HAVE_AT91_H32MX
> help
> Select this if you are using one of Atmel's SAMA5D4 family SoC.
> -endif
> +endif # SOC_SAM_V7
> +
> +
> +menuconfig SOC_SAM_V4_V5
> + bool "Atmel ARM9 AT91SAM9/AT91RM9200" if ARCH_MULTI_V4_V5
> + select ARCH_AT91
> + help
> + Select this if you are using one of Atmel's AT91SAM9 or
> + AT91RM9200 SoC.
>
> if SOC_SAM_V4_V5
> config SOC_AT91RM9200
> - bool "AT91RM9200"
> + bool "AT91RM9200" if ARCH_MULTI_V4T
> select ATMEL_AIC_IRQ
> - select COMMON_CLK_AT91
> select CPU_ARM920T
> - select GENERIC_CLOCKEVENTS
> select HAVE_AT91_USB_CLK
> select MIGHT_HAVE_PCI
>
> config SOC_AT91SAM9
> - bool "AT91SAM9"
> + bool "AT91SAM9" if ARCH_MULTI_V5
> select ATMEL_AIC_IRQ
> select ATMEL_SDRAMC
> - select COMMON_CLK_AT91
> select CPU_ARM926T
> - select GENERIC_CLOCKEVENTS
> select HAVE_AT91_SMD
> select HAVE_AT91_USB_CLK
> select HAVE_AT91_UTMI
> @@ -115,6 +90,34 @@ config SOC_AT91SAM9
> AT91SAM9XE
> endif # SOC_SAM_V4_V5
>
> +if ARCH_AT91
> +
> +config HAVE_AT91_UTMI
> + bool
> +
> +config HAVE_AT91_USB_CLK
> + bool
> +
> +config COMMON_CLK_AT91
> + bool
> + select COMMON_CLK
This belongs in drivers/clk.
> +
> +config HAVE_AT91_SMD
> + bool
> +
> +config HAVE_AT91_H32MX
> + bool
> +
> +config SOC_SAMA5
> + bool
> + select ATMEL_AIC5_IRQ
> + select CPU_V7
This is not needed.
> + select MEMORY
> + select ATMEL_SDRAMC
> + select PHYLIB if NETDEVICES
This belongs with your network driver.
> +
> +menu "Atmel AT91 common options"
> +
> comment "AT91 Feature Selections"
>
> config AT91_SLOW_CLOCK
> @@ -132,12 +135,12 @@ config AT91_SLOW_CLOCK
> need to be completely re-initialized.
>
> config AT91_TIMER_HZ
> - int "Kernel HZ (jiffies per second)"
> - range 32 1024
> - depends on ARCH_AT91
> - default "128" if SOC_AT91RM9200
> - default "100"
> - help
> + int "Kernel HZ (jiffies per second)"
How is this multi-platform compatible. This belongs with the
clockevent driver probably.
> + range 32 1024
> + depends on ARCH_AT91
> + default "128" if SOC_AT91RM9200
> + default "100"
> + help
> On AT91rm9200 chips where you're using a system clock derived
> from the 32768 Hz hardware clock, this tick rate should divide
> it exactly: use a power-of-two value, such as 128 or 256, to
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 999f12dbdd16..e51170eeaacd 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -1,6 +1,8 @@
> #
> # Makefile for the linux kernel.
> #
> +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
> +asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
>
> obj-y := soc.o
>
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/7] ARM: at91: switch to multiplatform
2015-03-05 22:50 ` Rob Herring
@ 2015-03-05 23:35 ` Alexandre Belloni
2015-03-06 3:02 ` Rob Herring
0 siblings, 1 reply; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 23:35 UTC (permalink / raw)
To: linux-arm-kernel
On 05/03/2015 at 16:50:57 -0600, Rob Herring wrote :
> > -config SOC_SAMA5
> > +config ARCH_AT91
> > bool
> > - select ATMEL_AIC5_IRQ
> > + select ARCH_REQUIRE_GPIOLIB
> > select COMMON_CLK_AT91
> > - select CPU_V7
> > + select CLKDEV_LOOKUP
>
> This is already selected by COMMON_CLK I think.
>
> > select GENERIC_CLOCKEVENTS
>
> This is already selected.
>
I'm just moving options around I didn't add or remove any. That applies
to most of your comments.
> > - select MEMORY
> > - select ATMEL_SDRAMC
> > - select PHYLIB if NETDEVICES
> > -
> > -menu "Atmel AT91 System-on-Chip"
> > -
> > -choice
> > -
> > - prompt "Core type"
> > -
> > -config SOC_SAM_V4_V5
> > - bool "ARM9 AT91SAM9/AT91RM9200"
> > - help
> > - Select this if you are using one of Atmel's AT91SAM9 or
> > - AT91RM9200 SoC.
> > -
> > -config SOC_SAM_V7
> > - bool "Cortex A5"
> > + select IRQ_DOMAIN
> > + select NEED_MACH_IO_H if PCCARD
>
> This won't work on multi-platform.
>
There is a patch removing it that is part of another series. IT will be
applied before this patch.
>
> > + select MEMORY
> > + select ATMEL_SDRAMC
> > + select PHYLIB if NETDEVICES
>
> This belongs with your network driver.
Probably not, it is there because of the phy fixups. Anyway, it is being
removed by another series as we don't like to carry phy fixups.
> > config AT91_TIMER_HZ
> > - int "Kernel HZ (jiffies per second)"
> > - range 32 1024
> > - depends on ARCH_AT91
> > - default "128" if SOC_AT91RM9200
> > - default "100"
> > - help
> > + int "Kernel HZ (jiffies per second)"
>
> How is this multi-platform compatible. This belongs with the
> clockevent driver probably.
>
It is not different from what is done for ARCH_EXYNOS4 which is also
mutliplatform (and the more annoyingly ARMv7). I propose to restrict
that to SOC_AT91RM9200 so that it only affects ARMv4 (and I guess not
many people care about those now). I'm not sure it is a good idea to
move it to clokevents because of how it is handled in arch/arm/Kconfig.
I'll add a patch on top of that to further cleanup the unnecessary
options you pointed and moving COMMON_CLK_AT91 to driver/clk.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/7] ARM: at91: switch to multiplatform
2015-03-05 23:35 ` Alexandre Belloni
@ 2015-03-06 3:02 ` Rob Herring
0 siblings, 0 replies; 12+ messages in thread
From: Rob Herring @ 2015-03-06 3:02 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 5, 2015 at 5:35 PM, Alexandre Belloni
<alexandre.belloni@free-electrons.com> wrote:
> On 05/03/2015 at 16:50:57 -0600, Rob Herring wrote :
>> > -config SOC_SAMA5
>> > +config ARCH_AT91
>> > bool
>> > - select ATMEL_AIC5_IRQ
>> > + select ARCH_REQUIRE_GPIOLIB
>> > select COMMON_CLK_AT91
>> > - select CPU_V7
>> > + select CLKDEV_LOOKUP
>>
>> This is already selected by COMMON_CLK I think.
>>
>> > select GENERIC_CLOCKEVENTS
>>
>> This is already selected.
>>
>
> I'm just moving options around I didn't add or remove any. That applies
> to most of your comments.
You are enabling multiplatform which means you can drop selecting the
ones multiplatform selects. I've cleaned-up up the tree once for this
and I don't care to do it again.
Rob
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/7] ARM: at91: switch at91_dt_defconfig to multiplatform
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 1/7] ARM: at91: switch " Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 3/7] ARM: at91: remove unused headers Alexandre Belloni
` (4 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/configs/at91_dt_defconfig | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index f2670f638e97..c944fb6e1ece 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -13,7 +13,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_SOC_SAM_V4_V5=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9=y
CONFIG_AT91_TIMER_HZ=128
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 3/7] ARM: at91: remove unused headers
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 1/7] ARM: at91: switch " Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 2/7] ARM: at91: switch at91_dt_defconfig " Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 4/7] ARM: at91: remove useless mach/cpu.h Alexandre Belloni
` (3 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
Following the switch to multiplatform, uncompress.h is not used anymore. Remove
it.
at91_dbgu.h is also not used anymore
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/include/mach/at91_dbgu.h | 63 --------
arch/arm/mach-at91/include/mach/uncompress.h | 218 ---------------------------
2 files changed, 281 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_dbgu.h
delete mode 100644 arch/arm/mach-at91/include/mach/uncompress.h
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
deleted file mode 100644
index 42925e8f78e4..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define AT91_DBGU_CR (0x00) /* Control Register */
-#define AT91_DBGU_MR (0x04) /* Mode Register */
-#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
-#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
-#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */
-#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */
-#define AT91_DBGU_SR (0x14) /* Status Register */
-#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */
-#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
-#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */
-#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */
-#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */
-#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
-#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
-#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
-#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
-#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
-#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
-#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
-#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
-#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
-#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
-#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
-#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
-#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
-#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
-#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
-#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
-#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
-#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
-#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
-#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
-#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
-#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
deleted file mode 100644
index 4ebb609369e3..000000000000
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/uncompress.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <linux/atmel_serial.h>
-#include <mach/hardware.h>
-
-#include <mach/at91_dbgu.h>
-#include <mach/cpu.h>
-
-void __iomem *at91_uart;
-
-static const u32 uarts_rm9200[] = {
- AT91_BASE_DBGU0,
- AT91RM9200_BASE_US0,
- AT91RM9200_BASE_US1,
- AT91RM9200_BASE_US2,
- AT91RM9200_BASE_US3,
- 0,
-};
-
-static const u32 uarts_sam9260[] = {
- AT91_BASE_DBGU0,
- AT91SAM9260_BASE_US0,
- AT91SAM9260_BASE_US1,
- AT91SAM9260_BASE_US2,
- AT91SAM9260_BASE_US3,
- AT91SAM9260_BASE_US4,
- AT91SAM9260_BASE_US5,
- 0,
-};
-
-static const u32 uarts_sam9261[] = {
- AT91_BASE_DBGU0,
- AT91SAM9261_BASE_US0,
- AT91SAM9261_BASE_US1,
- AT91SAM9261_BASE_US2,
- 0,
-};
-
-static const u32 uarts_sam9263[] = {
- AT91_BASE_DBGU1,
- AT91SAM9263_BASE_US0,
- AT91SAM9263_BASE_US1,
- AT91SAM9263_BASE_US2,
- 0,
-};
-
-static const u32 uarts_sam9g45[] = {
- AT91_BASE_DBGU1,
- AT91SAM9G45_BASE_US0,
- AT91SAM9G45_BASE_US1,
- AT91SAM9G45_BASE_US2,
- AT91SAM9G45_BASE_US3,
- 0,
-};
-
-static const u32 uarts_sam9rl[] = {
- AT91_BASE_DBGU0,
- AT91SAM9RL_BASE_US0,
- AT91SAM9RL_BASE_US1,
- AT91SAM9RL_BASE_US2,
- AT91SAM9RL_BASE_US3,
- 0,
-};
-
-static const u32 uarts_sam9x5[] = {
- AT91_BASE_DBGU0,
- AT91SAM9X5_BASE_USART0,
- AT91SAM9X5_BASE_USART1,
- AT91SAM9X5_BASE_USART2,
- 0,
-};
-
-static const u32 uarts_sama5d3[] = {
- AT91_BASE_DBGU1,
- SAMA5D3_BASE_USART0,
- SAMA5D3_BASE_USART1,
- SAMA5D3_BASE_USART2,
- SAMA5D3_BASE_USART3,
- 0,
-};
-
-static const u32 uarts_sama5d4[] = {
- AT91_BASE_DBGU2,
- SAMA5D4_BASE_USART3,
- 0,
-};
-
-static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
-{
- u32 cidr, socid;
-
- cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
- socid = cidr & ~AT91_CIDR_VERSION;
-
- switch (socid) {
- case ARCH_ID_AT91RM9200:
- return uarts_rm9200;
-
- case ARCH_ID_AT91SAM9G20:
- case ARCH_ID_AT91SAM9260:
- return uarts_sam9260;
-
- case ARCH_ID_AT91SAM9261:
- return uarts_sam9261;
-
- case ARCH_ID_AT91SAM9263:
- return uarts_sam9263;
-
- case ARCH_ID_AT91SAM9G45:
- return uarts_sam9g45;
-
- case ARCH_ID_AT91SAM9RL64:
- return uarts_sam9rl;
-
- case ARCH_ID_AT91SAM9N12:
- case ARCH_ID_AT91SAM9X5:
- return uarts_sam9x5;
-
- case ARCH_ID_SAMA5:
- cidr = __raw_readl(dbgu_base + AT91_DBGU_EXID);
- if (cidr & ARCH_EXID_SAMA5D3)
- return uarts_sama5d3;
- else if (cidr & ARCH_EXID_SAMA5D4)
- return uarts_sama5d4;
-
- break;
- }
-
- /* at91sam9g10 */
- if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
- return uarts_sam9261;
- }
- /* at91sam9xe */
- else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
- return uarts_sam9260;
- }
-
- return NULL;
-}
-
-static inline void arch_decomp_setup(void)
-{
- int i = 0;
- const u32* usarts;
-
- usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0);
- if (!usarts)
- usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1);
- if (!usarts)
- usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU2);
- if (!usarts) {
- at91_uart = NULL;
- return;
- }
-
- do {
- /* physical address */
- at91_uart = (void __iomem *)usarts[i];
-
- if (__raw_readl(at91_uart + ATMEL_US_BRGR))
- return;
- i++;
- } while (usarts[i]);
-
- at91_uart = NULL;
-}
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- if (!at91_uart)
- return;
-
- while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
- barrier();
- __raw_writel(c, at91_uart + ATMEL_US_THR);
-}
-
-static inline void flush(void)
-{
- if (!at91_uart)
- return;
-
- /* wait for transmission to complete */
- while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
- barrier();
-}
-
-#endif
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 4/7] ARM: at91: remove useless mach/cpu.h
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
` (2 preceding siblings ...)
2015-03-05 19:17 ` [PATCH v2 3/7] ARM: at91: remove unused headers Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 5/7] ARM: at91: sama5d4: remove useless map_io Alexandre Belloni
` (2 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
mach/cpu.h is not used anymore, remove it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/include/mach/at91sam9_smc.h | 2 -
arch/arm/mach-at91/include/mach/cpu.h | 216 -------------------------
arch/arm/mach-at91/pm.c | 1 -
3 files changed, 219 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/cpu.h
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index 175e1fdd9fe8..ff54a0ce90e3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -16,8 +16,6 @@
#ifndef AT91SAM9_SMC_H
#define AT91SAM9_SMC_H
-#include <mach/cpu.h>
-
#ifndef __ASSEMBLY__
struct sam9_smc_config {
/* Setup register */
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
deleted file mode 100644
index ce7c80a44983..000000000000
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/cpu.h
- *
- * Copyright (C) 2006 SAN People
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __MACH_CPU_H__
-#define __MACH_CPU_H__
-
-#define ARCH_ID_AT91RM9200 0x09290780
-#define ARCH_ID_AT91SAM9260 0x019803a0
-#define ARCH_ID_AT91SAM9261 0x019703a0
-#define ARCH_ID_AT91SAM9263 0x019607a0
-#define ARCH_ID_AT91SAM9G10 0x019903a0
-#define ARCH_ID_AT91SAM9G20 0x019905a0
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-#define ARCH_ID_AT91SAM9G45 0x819b05a0
-#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
-#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
-#define ARCH_ID_AT91SAM9X5 0x819a05a0
-#define ARCH_ID_AT91SAM9N12 0x819a07a0
-
-#define ARCH_ID_AT91SAM9XE128 0x329973a0
-#define ARCH_ID_AT91SAM9XE256 0x329a93a0
-#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-
-#define ARCH_ID_AT91M40800 0x14080044
-#define ARCH_ID_AT91R40807 0x44080746
-#define ARCH_ID_AT91M40807 0x14080745
-#define ARCH_ID_AT91R40008 0x44000840
-
-#define ARCH_ID_SAMA5 0x8A5C07C0
-
-#define ARCH_EXID_AT91SAM9M11 0x00000001
-#define ARCH_EXID_AT91SAM9M10 0x00000002
-#define ARCH_EXID_AT91SAM9G46 0x00000003
-#define ARCH_EXID_AT91SAM9G45 0x00000004
-
-#define ARCH_EXID_AT91SAM9G15 0x00000000
-#define ARCH_EXID_AT91SAM9G35 0x00000001
-#define ARCH_EXID_AT91SAM9X35 0x00000002
-#define ARCH_EXID_AT91SAM9G25 0x00000003
-#define ARCH_EXID_AT91SAM9X25 0x00000004
-
-#define ARCH_EXID_SAMA5D3 0x00004300
-#define ARCH_EXID_SAMA5D31 0x00444300
-#define ARCH_EXID_SAMA5D33 0x00414300
-#define ARCH_EXID_SAMA5D34 0x00414301
-#define ARCH_EXID_SAMA5D35 0x00584300
-#define ARCH_EXID_SAMA5D36 0x00004301
-
-#define ARCH_EXID_SAMA5D4 0x00000007
-#define ARCH_EXID_SAMA5D41 0x00000001
-#define ARCH_EXID_SAMA5D42 0x00000002
-#define ARCH_EXID_SAMA5D43 0x00000003
-#define ARCH_EXID_SAMA5D44 0x00000004
-
-#define ARCH_FAMILY_AT91SAM9 0x01900000
-#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-
-/* RM9200 type */
-#define ARCH_REVISON_9200_BGA (0 << 0)
-#define ARCH_REVISON_9200_PQFP (1 << 0)
-
-#ifndef __ASSEMBLY__
-enum at91_soc_type {
- /* 920T */
- AT91_SOC_RM9200,
-
- /* SAM92xx */
- AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
-
- /* SAM9Gxx */
- AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45,
-
- /* SAM9RL */
- AT91_SOC_SAM9RL,
-
- /* SAM9X5 */
- AT91_SOC_SAM9X5,
-
- /* SAM9N12 */
- AT91_SOC_SAM9N12,
-
- /* SAMA5D3 */
- AT91_SOC_SAMA5D3,
-
- /* SAMA5D4 */
- AT91_SOC_SAMA5D4,
-
- /* Unknown type */
- AT91_SOC_UNKNOWN,
-};
-
-enum at91_soc_subtype {
- /* RM9200 */
- AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
-
- /* SAM9260 */
- AT91_SOC_SAM9XE,
-
- /* SAM9G45 */
- AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11,
-
- /* SAM9X5 */
- AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
- AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
-
- /* SAMA5D3 */
- AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
- AT91_SOC_SAMA5D35, AT91_SOC_SAMA5D36,
-
- /* SAMA5D4 */
- AT91_SOC_SAMA5D41, AT91_SOC_SAMA5D42, AT91_SOC_SAMA5D43,
- AT91_SOC_SAMA5D44,
-
- /* No subtype for this SoC */
- AT91_SOC_SUBTYPE_NONE,
-
- /* Unknown subtype */
- AT91_SOC_SUBTYPE_UNKNOWN,
-};
-
-struct at91_socinfo {
- unsigned int type, subtype;
- unsigned int cidr, exid;
-};
-
-extern struct at91_socinfo at91_soc_initdata;
-const char *at91_get_soc_type(struct at91_socinfo *c);
-const char *at91_get_soc_subtype(struct at91_socinfo *c);
-
-static inline int at91_soc_is_detected(void)
-{
- return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
-}
-
-#ifdef CONFIG_SOC_AT91RM9200
-#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200)
-#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
-#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
-#else
-#define cpu_is_at91rm9200() (0)
-#define cpu_is_at91rm9200_bga() (0)
-#define cpu_is_at91rm9200_pqfp() (0)
-#endif
-
-#ifdef CONFIG_SOC_AT91SAM9
-#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
-#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260)
-#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261)
-#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10)
-#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263)
-#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL)
-#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45)
-#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
-#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
-#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46)
-#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11)
-#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5)
-#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
-#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
-#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35)
-#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25)
-#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25)
-#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12)
-#else
-#define cpu_is_at91sam9xe() (0)
-#define cpu_is_at91sam9260() (0)
-#define cpu_is_at91sam9g20() (0)
-#define cpu_is_at91sam9261() (0)
-#define cpu_is_at91sam9g10() (0)
-#define cpu_is_at91sam9263() (0)
-#define cpu_is_at91sam9rl() (0)
-#define cpu_is_at91sam9g45() (0)
-#define cpu_is_at91sam9g45es() (0)
-#define cpu_is_at91sam9m10() (0)
-#define cpu_is_at91sam9g46() (0)
-#define cpu_is_at91sam9m11() (0)
-#define cpu_is_at91sam9x5() (0)
-#define cpu_is_at91sam9g15() (0)
-#define cpu_is_at91sam9g35() (0)
-#define cpu_is_at91sam9x35() (0)
-#define cpu_is_at91sam9g25() (0)
-#define cpu_is_at91sam9x25() (0)
-#define cpu_is_at91sam9n12() (0)
-#endif
-
-#ifdef CONFIG_SOC_SAMA5D3
-#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3)
-#else
-#define cpu_is_sama5d3() (0)
-#endif
-
-#ifdef CONFIG_SOC_SAMA5D4
-#define cpu_is_sama5d4() (at91_soc_initdata.type == AT91_SOC_SAMA5D4)
-#else
-#define cpu_is_sama5d4() (0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000() (0)
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MACH_CPU_H__ */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5e34fb143309..de17f59ae67d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -30,7 +30,6 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/cpu.h>
#include <mach/hardware.h>
#include "generic.h"
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 5/7] ARM: at91: sama5d4: remove useless map_io
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
` (3 preceding siblings ...)
2015-03-05 19:17 ` [PATCH v2 4/7] ARM: at91: remove useless mach/cpu.h Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
2015-03-13 17:01 ` Nicolas Ferre
2015-03-05 19:17 ` [PATCH v2 6/7] ARM: at91: remove SoC headers Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 7/7] ARM: at91: remove hardware.h Alexandre Belloni
6 siblings, 1 reply; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
All the peripheral remapped at io_map are taken care of by their respective
drivers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/sama5.c | 33 ---------------------------------
1 file changed, 33 deletions(-)
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 26b718a0c235..d7593d572a77 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -89,38 +89,6 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
.dt_compat = sama5_dt_board_compat,
MACHINE_END
-static struct map_desc at91_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
- .length = SZ_512,
- .type = MT_DEVICE,
- },
- {
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
- .length = SZ_512,
- .type = MT_DEVICE,
- },
- { /* On sama5d4, we use USART3 as serial console */
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
- .length = SZ_256,
- .type = MT_DEVICE,
- },
- { /* A bunch of peripheral with fine grained IO space */
- .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
- .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
- .length = SZ_2K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init sama5_alt_map_io(void)
-{
- iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
-}
-
static const char *sama5_alt_dt_board_compat[] __initconst = {
"atmel,sama5d4",
NULL
@@ -128,7 +96,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
- .map_io = sama5_alt_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_alt_dt_board_compat,
.l2c_aux_mask = ~0UL,
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 5/7] ARM: at91: sama5d4: remove useless map_io
2015-03-05 19:17 ` [PATCH v2 5/7] ARM: at91: sama5d4: remove useless map_io Alexandre Belloni
@ 2015-03-13 17:01 ` Nicolas Ferre
0 siblings, 0 replies; 12+ messages in thread
From: Nicolas Ferre @ 2015-03-13 17:01 UTC (permalink / raw)
To: linux-arm-kernel
Le 05/03/2015 20:17, Alexandre Belloni a ?crit :
> All the peripheral remapped at io_map are taken care of by their respective
> drivers.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nice: I take this one with the at91-cleanup2 tag. So I'll skip this one
when taking care of this series ;-)
> ---
> arch/arm/mach-at91/sama5.c | 33 ---------------------------------
> 1 file changed, 33 deletions(-)
>
> diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
> index 26b718a0c235..d7593d572a77 100644
> --- a/arch/arm/mach-at91/sama5.c
> +++ b/arch/arm/mach-at91/sama5.c
> @@ -89,38 +89,6 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
> .dt_compat = sama5_dt_board_compat,
> MACHINE_END
>
> -static struct map_desc at91_io_desc[] __initdata = {
> - {
> - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
> - .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
> - .length = SZ_512,
> - .type = MT_DEVICE,
> - },
> - {
> - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
> - .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
> - .length = SZ_512,
> - .type = MT_DEVICE,
> - },
> - { /* On sama5d4, we use USART3 as serial console */
> - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
> - .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
> - .length = SZ_256,
> - .type = MT_DEVICE,
> - },
> - { /* A bunch of peripheral with fine grained IO space */
> - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
> - .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
> - .length = SZ_2K,
> - .type = MT_DEVICE,
> - },
> -};
> -
> -static void __init sama5_alt_map_io(void)
> -{
> - iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
> -}
> -
> static const char *sama5_alt_dt_board_compat[] __initconst = {
> "atmel,sama5d4",
> NULL
> @@ -128,7 +96,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
>
> DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
> /* Maintainer: Atmel */
> - .map_io = sama5_alt_map_io,
> .init_machine = sama5_dt_device_init,
> .dt_compat = sama5_alt_dt_board_compat,
> .l2c_aux_mask = ~0UL,
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 6/7] ARM: at91: remove SoC headers
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
` (4 preceding siblings ...)
2015-03-05 19:17 ` [PATCH v2 5/7] ARM: at91: sama5d4: remove useless map_io Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
2015-03-05 19:17 ` [PATCH v2 7/7] ARM: at91: remove hardware.h Alexandre Belloni
6 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
Remove the now useless SoC headers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/include/mach/at91rm9200.h | 103 -------------------
arch/arm/mach-at91/include/mach/at91sam9260.h | 129 -----------------------
arch/arm/mach-at91/include/mach/at91sam9261.h | 99 ------------------
arch/arm/mach-at91/include/mach/at91sam9263.h | 117 ---------------------
arch/arm/mach-at91/include/mach/at91sam9g45.h | 143 --------------------------
arch/arm/mach-at91/include/mach/at91sam9n12.h | 65 ------------
arch/arm/mach-at91/include/mach/at91sam9rl.h | 105 -------------------
arch/arm/mach-at91/include/mach/at91sam9x5.h | 71 -------------
arch/arm/mach-at91/include/mach/hardware.h | 11 --
arch/arm/mach-at91/include/mach/sama5d3.h | 86 ----------------
arch/arm/mach-at91/include/mach/sama5d4.h | 33 ------
11 files changed, 962 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91rm9200.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9260.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9261.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9263.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9n12.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9rl.h
delete mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
delete mode 100644 arch/arm/mach-at91/include/mach/sama5d3.h
delete mode 100644 arch/arm/mach-at91/include/mach/sama5d4.h
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
deleted file mode 100644
index e67317c67761..000000000000
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91RM9200_ID_US0 6 /* USART 0 */
-#define AT91RM9200_ID_US1 7 /* USART 1 */
-#define AT91RM9200_ID_US2 8 /* USART 2 */
-#define AT91RM9200_ID_US3 9 /* USART 3 */
-#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP 11 /* USB Device Port */
-#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
-#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
-#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
-#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
-#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
-#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
-#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
-#define AT91RM9200_ID_UHP 23 /* USB Host port */
-#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0 0xfffa0000
-#define AT91RM9200_BASE_TC0 0xfffa0000
-#define AT91RM9200_BASE_TC1 0xfffa0040
-#define AT91RM9200_BASE_TC2 0xfffa0080
-#define AT91RM9200_BASE_TCB1 0xfffa4000
-#define AT91RM9200_BASE_TC3 0xfffa4000
-#define AT91RM9200_BASE_TC4 0xfffa4040
-#define AT91RM9200_BASE_TC5 0xfffa4080
-#define AT91RM9200_BASE_UDP 0xfffb0000
-#define AT91RM9200_BASE_MCI 0xfffb4000
-#define AT91RM9200_BASE_TWI 0xfffb8000
-#define AT91RM9200_BASE_EMAC 0xfffbc000
-#define AT91RM9200_BASE_US0 0xfffc0000
-#define AT91RM9200_BASE_US1 0xfffc4000
-#define AT91RM9200_BASE_US2 0xfffc8000
-#define AT91RM9200_BASE_US3 0xfffcc000
-#define AT91RM9200_BASE_SSC0 0xfffd0000
-#define AT91RM9200_BASE_SSC1 0xfffd4000
-#define AT91RM9200_BASE_SSC2 0xfffd8000
-#define AT91RM9200_BASE_SPI 0xfffe0000
-
-
-/*
- * System Peripherals
- */
-#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */
-#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */
-#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */
-#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */
-#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */
-#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */
-#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
-#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
deleted file mode 100644
index 416c7b6c56d3..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0 6 /* USART 0 */
-#define AT91SAM9260_ID_US1 7 /* USART 1 */
-#define AT91SAM9260_ID_US2 8 /* USART 2 */
-#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP 20 /* USB Host port */
-#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
-#define AT91SAM9260_ID_US3 23 /* USART 3 */
-#define AT91SAM9260_ID_US4 24 /* USART 4 */
-#define AT91SAM9260_ID_US5 25 /* USART 5 */
-#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0 0xfffa0000
-#define AT91SAM9260_BASE_TC0 0xfffa0000
-#define AT91SAM9260_BASE_TC1 0xfffa0040
-#define AT91SAM9260_BASE_TC2 0xfffa0080
-#define AT91SAM9260_BASE_UDP 0xfffa4000
-#define AT91SAM9260_BASE_MCI 0xfffa8000
-#define AT91SAM9260_BASE_TWI 0xfffac000
-#define AT91SAM9260_BASE_US0 0xfffb0000
-#define AT91SAM9260_BASE_US1 0xfffb4000
-#define AT91SAM9260_BASE_US2 0xfffb8000
-#define AT91SAM9260_BASE_SSC 0xfffbc000
-#define AT91SAM9260_BASE_ISI 0xfffc0000
-#define AT91SAM9260_BASE_EMAC 0xfffc4000
-#define AT91SAM9260_BASE_SPI0 0xfffc8000
-#define AT91SAM9260_BASE_SPI1 0xfffcc000
-#define AT91SAM9260_BASE_US3 0xfffd0000
-#define AT91SAM9260_BASE_US4 0xfffd4000
-#define AT91SAM9260_BASE_US5 0xfffd8000
-#define AT91SAM9260_BASE_TCB1 0xfffdc000
-#define AT91SAM9260_BASE_TC3 0xfffdc000
-#define AT91SAM9260_BASE_TC4 0xfffdc040
-#define AT91SAM9260_BASE_TC5 0xfffdc080
-#define AT91SAM9260_BASE_ADC 0xfffe0000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9260_BASE_ECC 0xffffe800
-#define AT91SAM9260_BASE_SDRAMC 0xffffea00
-#define AT91SAM9260_BASE_SMC 0xffffec00
-#define AT91SAM9260_BASE_MATRIX 0xffffee00
-#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0
-#define AT91SAM9260_BASE_PIOA 0xfffff400
-#define AT91SAM9260_BASE_PIOB 0xfffff600
-#define AT91SAM9260_BASE_PIOC 0xfffff800
-#define AT91SAM9260_BASE_RSTC 0xfffffd00
-#define AT91SAM9260_BASE_SHDWC 0xfffffd10
-#define AT91SAM9260_BASE_RTT 0xfffffd20
-#define AT91SAM9260_BASE_PIT 0xfffffd30
-#define AT91SAM9260_BASE_WDT 0xfffffd40
-#define AT91SAM9260_BASE_GPBR 0xfffffd50
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
-#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */
-#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */
-
-#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */
-#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
-
-#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
deleted file mode 100644
index a041406d06ee..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0 6 /* USART 0 */
-#define AT91SAM9261_ID_US1 7 /* USART 1 */
-#define AT91SAM9261_ID_US2 8 /* USART 2 */
-#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP 20 /* USB Host port */
-#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
-#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0 0xfffa0000
-#define AT91SAM9261_BASE_TC0 0xfffa0000
-#define AT91SAM9261_BASE_TC1 0xfffa0040
-#define AT91SAM9261_BASE_TC2 0xfffa0080
-#define AT91SAM9261_BASE_UDP 0xfffa4000
-#define AT91SAM9261_BASE_MCI 0xfffa8000
-#define AT91SAM9261_BASE_TWI 0xfffac000
-#define AT91SAM9261_BASE_US0 0xfffb0000
-#define AT91SAM9261_BASE_US1 0xfffb4000
-#define AT91SAM9261_BASE_US2 0xfffb8000
-#define AT91SAM9261_BASE_SSC0 0xfffbc000
-#define AT91SAM9261_BASE_SSC1 0xfffc0000
-#define AT91SAM9261_BASE_SSC2 0xfffc4000
-#define AT91SAM9261_BASE_SPI0 0xfffc8000
-#define AT91SAM9261_BASE_SPI1 0xfffcc000
-
-
-/*
- * System Peripherals
- */
-#define AT91SAM9261_BASE_SMC 0xffffec00
-#define AT91SAM9261_BASE_MATRIX 0xffffee00
-#define AT91SAM9261_BASE_SDRAMC 0xffffea00
-#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0
-#define AT91SAM9261_BASE_PIOA 0xfffff400
-#define AT91SAM9261_BASE_PIOB 0xfffff600
-#define AT91SAM9261_BASE_PIOC 0xfffff800
-#define AT91SAM9261_BASE_RSTC 0xfffffd00
-#define AT91SAM9261_BASE_SHDWC 0xfffffd10
-#define AT91SAM9261_BASE_RTT 0xfffffd20
-#define AT91SAM9261_BASE_PIT 0xfffffd30
-#define AT91SAM9261_BASE_WDT 0xfffffd40
-#define AT91SAM9261_BASE_GPBR 0xfffffd50
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
-
-#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */
-#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */
-
-#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
-#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
deleted file mode 100644
index d201029d60b3..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0 7 /* USART 0 */
-#define AT91SAM9263_ID_US1 8 /* USART 1 */
-#define AT91SAM9263_ID_US2 9 /* USART 2 */
-#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN 12 /* CAN */
-#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
-#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
-#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
-#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
-#define AT91SAM9263_ID_UHP 29 /* USB Host port */
-#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP 0xfff78000
-#define AT91SAM9263_BASE_TCB0 0xfff7c000
-#define AT91SAM9263_BASE_TC0 0xfff7c000
-#define AT91SAM9263_BASE_TC1 0xfff7c040
-#define AT91SAM9263_BASE_TC2 0xfff7c080
-#define AT91SAM9263_BASE_MCI0 0xfff80000
-#define AT91SAM9263_BASE_MCI1 0xfff84000
-#define AT91SAM9263_BASE_TWI 0xfff88000
-#define AT91SAM9263_BASE_US0 0xfff8c000
-#define AT91SAM9263_BASE_US1 0xfff90000
-#define AT91SAM9263_BASE_US2 0xfff94000
-#define AT91SAM9263_BASE_SSC0 0xfff98000
-#define AT91SAM9263_BASE_SSC1 0xfff9c000
-#define AT91SAM9263_BASE_AC97C 0xfffa0000
-#define AT91SAM9263_BASE_SPI0 0xfffa4000
-#define AT91SAM9263_BASE_SPI1 0xfffa8000
-#define AT91SAM9263_BASE_CAN 0xfffac000
-#define AT91SAM9263_BASE_PWMC 0xfffb8000
-#define AT91SAM9263_BASE_EMAC 0xfffbc000
-#define AT91SAM9263_BASE_ISI 0xfffc4000
-#define AT91SAM9263_BASE_2DGE 0xfffc8000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9263_BASE_ECC0 0xffffe000
-#define AT91SAM9263_BASE_SDRAMC0 0xffffe200
-#define AT91SAM9263_BASE_SMC0 0xffffe400
-#define AT91SAM9263_BASE_ECC1 0xffffe600
-#define AT91SAM9263_BASE_SDRAMC1 0xffffe800
-#define AT91SAM9263_BASE_SMC1 0xffffea00
-#define AT91SAM9263_BASE_MATRIX 0xffffec00
-#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1
-#define AT91SAM9263_BASE_PIOA 0xfffff200
-#define AT91SAM9263_BASE_PIOB 0xfffff400
-#define AT91SAM9263_BASE_PIOC 0xfffff600
-#define AT91SAM9263_BASE_PIOD 0xfffff800
-#define AT91SAM9263_BASE_PIOE 0xfffffa00
-#define AT91SAM9263_BASE_RSTC 0xfffffd00
-#define AT91SAM9263_BASE_SHDWC 0xfffffd10
-#define AT91SAM9263_BASE_RTT0 0xfffffd20
-#define AT91SAM9263_BASE_PIT 0xfffffd30
-#define AT91SAM9263_BASE_WDT 0xfffffd40
-#define AT91SAM9263_BASE_RTT1 0xfffffd50
-#define AT91SAM9263_BASE_GPBR 0xfffffd60
-
-#define AT91_SMC AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
-#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
-#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
deleted file mode 100644
index 8eba1021f533..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Chip-specific header file for the AT91SAM9G45 family
- *
- * Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_H
-#define AT91SAM9G45_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */
-#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */
-#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */
-#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */
-#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */
-#define AT91SAM9G45_ID_US0 7 /* USART 0 */
-#define AT91SAM9G45_ID_US1 8 /* USART 1 */
-#define AT91SAM9G45_ID_US2 9 /* USART 2 */
-#define AT91SAM9G45_ID_US3 10 /* USART 3 */
-#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */
-#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */
-#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */
-#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */
-#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */
-#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */
-#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */
-#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */
-#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */
-#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */
-#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */
-#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */
-#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */
-#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9G45_BASE_UDPHS 0xfff78000
-#define AT91SAM9G45_BASE_TCB0 0xfff7c000
-#define AT91SAM9G45_BASE_TC0 0xfff7c000
-#define AT91SAM9G45_BASE_TC1 0xfff7c040
-#define AT91SAM9G45_BASE_TC2 0xfff7c080
-#define AT91SAM9G45_BASE_MCI0 0xfff80000
-#define AT91SAM9G45_BASE_TWI0 0xfff84000
-#define AT91SAM9G45_BASE_TWI1 0xfff88000
-#define AT91SAM9G45_BASE_US0 0xfff8c000
-#define AT91SAM9G45_BASE_US1 0xfff90000
-#define AT91SAM9G45_BASE_US2 0xfff94000
-#define AT91SAM9G45_BASE_US3 0xfff98000
-#define AT91SAM9G45_BASE_SSC0 0xfff9c000
-#define AT91SAM9G45_BASE_SSC1 0xfffa0000
-#define AT91SAM9G45_BASE_SPI0 0xfffa4000
-#define AT91SAM9G45_BASE_SPI1 0xfffa8000
-#define AT91SAM9G45_BASE_AC97C 0xfffac000
-#define AT91SAM9G45_BASE_TSC 0xfffb0000
-#define AT91SAM9G45_BASE_ISI 0xfffb4000
-#define AT91SAM9G45_BASE_PWMC 0xfffb8000
-#define AT91SAM9G45_BASE_EMAC 0xfffbc000
-#define AT91SAM9G45_BASE_AES 0xfffc0000
-#define AT91SAM9G45_BASE_TDES 0xfffc4000
-#define AT91SAM9G45_BASE_SHA 0xfffc8000
-#define AT91SAM9G45_BASE_TRNG 0xfffcc000
-#define AT91SAM9G45_BASE_MCI1 0xfffd0000
-#define AT91SAM9G45_BASE_TCB1 0xfffd4000
-#define AT91SAM9G45_BASE_TC3 0xfffd4000
-#define AT91SAM9G45_BASE_TC4 0xfffd4040
-#define AT91SAM9G45_BASE_TC5 0xfffd4080
-
-/*
- * System Peripherals
- */
-#define AT91SAM9G45_BASE_ECC 0xffffe200
-#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400
-#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600
-#define AT91SAM9G45_BASE_DMA 0xffffec00
-#define AT91SAM9G45_BASE_SMC 0xffffe800
-#define AT91SAM9G45_BASE_MATRIX 0xffffea00
-#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1
-#define AT91SAM9G45_BASE_PIOA 0xfffff200
-#define AT91SAM9G45_BASE_PIOB 0xfffff400
-#define AT91SAM9G45_BASE_PIOC 0xfffff600
-#define AT91SAM9G45_BASE_PIOD 0xfffff800
-#define AT91SAM9G45_BASE_PIOE 0xfffffa00
-#define AT91SAM9G45_BASE_RSTC 0xfffffd00
-#define AT91SAM9G45_BASE_SHDWC 0xfffffd10
-#define AT91SAM9G45_BASE_RTT 0xfffffd20
-#define AT91SAM9G45_BASE_PIT 0xfffffd30
-#define AT91SAM9G45_BASE_WDT 0xfffffd40
-#define AT91SAM9G45_BASE_RTC 0xfffffdb0
-#define AT91SAM9G45_BASE_GPBR 0xfffffd60
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */
-
-#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
-
-#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
-#define AT91SAM9G45_OHCI_BASE 0x00700000 /* USB Host controller (OHCI) */
-#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
-#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-
-/*
- * DMA peripheral identifiers
- * for hardware handshaking interface
- */
-#define AT_DMA_ID_MCI0 0
-#define AT_DMA_ID_SPI0_TX 1
-#define AT_DMA_ID_SPI0_RX 2
-#define AT_DMA_ID_SPI1_TX 3
-#define AT_DMA_ID_SPI1_RX 4
-#define AT_DMA_ID_SSC0_TX 5
-#define AT_DMA_ID_SSC0_RX 6
-#define AT_DMA_ID_SSC1_TX 7
-#define AT_DMA_ID_SSC1_RX 8
-#define AT_DMA_ID_AC97_TX 9
-#define AT_DMA_ID_AC97_RX 10
-#define AT_DMA_ID_AES_TX 11
-#define AT_DMA_ID_AES_RX 12
-#define AT_DMA_ID_MCI1 13
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
deleted file mode 100644
index 0151bcf6163c..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9n12.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * SoC specific header file for the AT91SAM9N12
- *
- * Copyright (C) 2012 Atmel Corporation
- *
- * Common definitions, based on AT91SAM9N12 SoC datasheet
- *
- * Licensed under GPLv2 or later
- */
-
-#ifndef _AT91SAM9N12_H_
-#define _AT91SAM9N12_H_
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9N12_ID_PIOAB 2 /* Parallel I/O Controller A and B */
-#define AT91SAM9N12_ID_PIOCD 3 /* Parallel I/O Controller C and D */
-#define AT91SAM9N12_ID_FUSE 4 /* FUSE Controller */
-#define AT91SAM9N12_ID_USART0 5 /* USART 0 */
-#define AT91SAM9N12_ID_USART1 6 /* USART 1 */
-#define AT91SAM9N12_ID_USART2 7 /* USART 2 */
-#define AT91SAM9N12_ID_USART3 8 /* USART 3 */
-#define AT91SAM9N12_ID_TWI0 9 /* Two-Wire Interface 0 */
-#define AT91SAM9N12_ID_TWI1 10 /* Two-Wire Interface 1 */
-#define AT91SAM9N12_ID_MCI 12 /* High Speed Multimedia Card Interface */
-#define AT91SAM9N12_ID_SPI0 13 /* Serial Peripheral Interface 0 */
-#define AT91SAM9N12_ID_SPI1 14 /* Serial Peripheral Interface 1 */
-#define AT91SAM9N12_ID_UART0 15 /* UART 0 */
-#define AT91SAM9N12_ID_UART1 16 /* UART 1 */
-#define AT91SAM9N12_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9N12_ID_PWM 18 /* Pulse Width Modulation Controller */
-#define AT91SAM9N12_ID_ADC 19 /* ADC Controller */
-#define AT91SAM9N12_ID_DMA 20 /* DMA Controller */
-#define AT91SAM9N12_ID_UHP 22 /* USB Host High Speed */
-#define AT91SAM9N12_ID_UDP 23 /* USB Device High Speed */
-#define AT91SAM9N12_ID_LCDC 25 /* LCD Controller */
-#define AT91SAM9N12_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9N12_ID_SSC 28 /* Synchronous Serial Controller */
-#define AT91SAM9N12_ID_TRNG 30 /* TRNG */
-#define AT91SAM9N12_ID_IRQ0 31 /* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9N12_BASE_USART0 0xf801c000
-#define AT91SAM9N12_BASE_USART1 0xf8020000
-#define AT91SAM9N12_BASE_USART2 0xf8024000
-#define AT91SAM9N12_BASE_USART3 0xf8028000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9N12_BASE_RTC 0xfffffeb0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9N12_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9N12_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
-
-#define AT91SAM9N12_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9N12_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
deleted file mode 100644
index a15db56d33fa..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-#define AT91SAM9RL_BASE_TC0 0xfffa0000
-#define AT91SAM9RL_BASE_TC1 0xfffa0040
-#define AT91SAM9RL_BASE_TC2 0xfffa0080
-#define AT91SAM9RL_BASE_MCI 0xfffa4000
-#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-#define AT91SAM9RL_BASE_TWI1 0xfffac000
-#define AT91SAM9RL_BASE_US0 0xfffb0000
-#define AT91SAM9RL_BASE_US1 0xfffb4000
-#define AT91SAM9RL_BASE_US2 0xfffb8000
-#define AT91SAM9RL_BASE_US3 0xfffbc000
-#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-#define AT91SAM9RL_BASE_SPI 0xfffcc000
-#define AT91SAM9RL_BASE_TSC 0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91SAM9RL_BASE_DMA 0xffffe600
-#define AT91SAM9RL_BASE_ECC 0xffffe800
-#define AT91SAM9RL_BASE_SDRAMC 0xffffea00
-#define AT91SAM9RL_BASE_SMC 0xffffec00
-#define AT91SAM9RL_BASE_MATRIX 0xffffee00
-#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0
-#define AT91SAM9RL_BASE_PIOA 0xfffff400
-#define AT91SAM9RL_BASE_PIOB 0xfffff600
-#define AT91SAM9RL_BASE_PIOC 0xfffff800
-#define AT91SAM9RL_BASE_PIOD 0xfffffa00
-#define AT91SAM9RL_BASE_RSTC 0xfffffd00
-#define AT91SAM9RL_BASE_SHDWC 0xfffffd10
-#define AT91SAM9RL_BASE_RTT 0xfffffd20
-#define AT91SAM9RL_BASE_PIT 0xfffffd30
-#define AT91SAM9RL_BASE_WDT 0xfffffd40
-#define AT91SAM9RL_BASE_GPBR 0xfffffd60
-#define AT91SAM9RL_BASE_RTC 0xfffffe00
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
deleted file mode 100644
index 2fc76c49e97c..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Chip-specific header file for the AT91SAM9x5 family
- *
- * Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9x5 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_H
-#define AT91SAM9X5_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */
-#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */
-#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */
-#define AT91SAM9X5_ID_USART0 5 /* USART 0 */
-#define AT91SAM9X5_ID_USART1 6 /* USART 1 */
-#define AT91SAM9X5_ID_USART2 7 /* USART 2 */
-#define AT91SAM9X5_ID_USART3 8 /* USART 3 */
-#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */
-#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */
-#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */
-#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */
-#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */
-#define AT91SAM9X5_ID_UART0 15 /* UART 0 */
-#define AT91SAM9X5_ID_UART1 16 /* UART 1 */
-#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */
-#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */
-#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */
-#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */
-#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */
-#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */
-#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */
-#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */
-#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */
-#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */
-#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */
-#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */
-#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */
-#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9X5_BASE_USART0 0xf801c000
-#define AT91SAM9X5_BASE_USART1 0xf8020000
-#define AT91SAM9X5_BASE_USART2 0xf8024000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_RTC 0xfffffeb0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
-
-#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index cacbaa52418f..2f8ce2d69fdb 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -24,17 +24,6 @@
/* sama5d4 */
#define AT91_BASE_DBGU2 0xfc069000
-#include <mach/at91rm9200.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91sam9261.h>
-#include <mach/at91sam9263.h>
-#include <mach/at91sam9rl.h>
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9x5.h>
-#include <mach/at91sam9n12.h>
-#include <mach/sama5d3.h>
-#include <mach/sama5d4.h>
-
/*
* On all at91 except rm9200 and x40 have the System Controller starts
* at address 0xffffc000 and has a size of 16KiB.
diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
deleted file mode 100644
index 25613d8c6dcd..000000000000
--- a/arch/arm/mach-at91/include/mach/sama5d3.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Chip-specific header file for the SAMA5D3 family
- *
- * Copyright (C) 2013 Atmel,
- * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Common definitions.
- * Based on SAMA5D3 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef SAMA5D3_H
-#define SAMA5D3_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */
-#define AT91_ID_PIT 3 /* PIT */
-#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */
-#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */
-#define SAMA5D3_ID_PIOA 6 /* PIOA */
-#define SAMA5D3_ID_PIOB 7 /* PIOB */
-#define SAMA5D3_ID_PIOC 8 /* PIOC */
-#define SAMA5D3_ID_PIOD 9 /* PIOD */
-#define SAMA5D3_ID_PIOE 10 /* PIOE */
-#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */
-#define SAMA5D3_ID_USART0 12 /* USART0 */
-#define SAMA5D3_ID_USART1 13 /* USART1 */
-#define SAMA5D3_ID_USART2 14 /* USART2 */
-#define SAMA5D3_ID_USART3 15 /* USART3 */
-#define SAMA5D3_ID_UART0 16 /* UART 0 */
-#define SAMA5D3_ID_UART1 17 /* UART 1 */
-#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */
-#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */
-#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */
-#define SAMA5D3_ID_HSMCI0 21 /* MCI */
-#define SAMA5D3_ID_HSMCI1 22 /* MCI */
-#define SAMA5D3_ID_HSMCI2 23 /* MCI */
-#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */
-#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */
-#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */
-#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */
-#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */
-#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */
-#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */
-#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */
-#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */
-#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */
-#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */
-#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */
-#define SAMA5D3_ID_LCDC 36 /* LCD Controller */
-#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */
-#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */
-#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */
-#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */
-#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */
-#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */
-#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */
-#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */
-#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */
-#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define SAMA5D3_BASE_USART0 0xf001c000
-#define SAMA5D3_BASE_USART1 0xf0020000
-#define SAMA5D3_BASE_USART2 0xf8020000
-#define SAMA5D3_BASE_USART3 0xf8024000
-
-/*
- * System Peripherals
- */
-#define SAMA5D3_BASE_RTC 0xfffffeb0
-
-/*
- * Internal Memory
- */
-#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h
deleted file mode 100644
index f256a45d9854..000000000000
--- a/arch/arm/mach-at91/include/mach/sama5d4.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Chip-specific header file for the SAMA5D4 family
- *
- * Copyright (C) 2013 Atmel Corporation,
- * Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Common definitions.
- * Based on SAMA5D4 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef SAMA5D4_H
-#define SAMA5D4_H
-
-/*
- * User Peripheral physical base addresses.
- */
-#define SAMA5D4_BASE_USART3 0xfc00c000 /* (USART3 non-secure) Base Address */
-#define SAMA5D4_BASE_PMC 0xf0018000 /* (PMC) Base Address */
-#define SAMA5D4_BASE_MPDDRC 0xf0010000 /* (MPDDRC) Base Address */
-#define SAMA5D4_BASE_PIOD 0xfc068000 /* (PIOD) Base Address */
-
-/* Some other peripherals */
-#define SAMA5D4_BASE_SYS2 SAMA5D4_BASE_PIOD
-
-/*
- * Internal Memory.
- */
-#define SAMA5D4_NS_SRAM_BASE 0x00210000 /* Internal SRAM base address Non-Secure */
-#define SAMA5D4_NS_SRAM_SIZE (64 * SZ_1K) /* Internal SRAM size Non-Secure part (64Kb) */
-
-#endif
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v2 7/7] ARM: at91: remove hardware.h
2015-03-05 19:17 [PATCH v2 0/7] Switch mach-at91 to multiplatform Alexandre Belloni
` (5 preceding siblings ...)
2015-03-05 19:17 ` [PATCH v2 6/7] ARM: at91: remove SoC headers Alexandre Belloni
@ 2015-03-05 19:17 ` Alexandre Belloni
6 siblings, 0 replies; 12+ messages in thread
From: Alexandre Belloni @ 2015-03-05 19:17 UTC (permalink / raw)
To: linux-arm-kernel
hardware.h is now mostyl unused, move the remaining declarations to pm.c and
remove it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/mach-at91/include/mach/hardware.h | 123 -----------------------------
arch/arm/mach-at91/pm.c | 11 ++-
arch/arm/mach-at91/pm_slowclock.S | 1 -
arch/arm/mach-at91/sama5.c | 2 -
4 files changed, 9 insertions(+), 128 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/hardware.h
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
deleted file mode 100644
index 2f8ce2d69fdb..000000000000
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/hardware.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* DBGU base */
-/* rm9200, 9260/9g20, 9261/9g10, 9rl */
-#define AT91_BASE_DBGU0 0xfffff200
-/* 9263, 9g45, sama5d3 */
-#define AT91_BASE_DBGU1 0xffffee00
-/* sama5d4 */
-#define AT91_BASE_DBGU2 0xfc069000
-
-/*
- * On all at91 except rm9200 and x40 have the System Controller starts
- * at address 0xffffc000 and has a size of 16KiB.
- *
- * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
- * at 0xfffff000
- *
- * Removes the individual definitions of AT91_BASE_SYS and
- * replaces them with a common version at base 0xfffffc000 and size 16KiB
- * and map the same memory space
- */
-#define AT91_BASE_SYS 0xffffc000
-
-/*
- * On sama5d4 there is no system controller, we map some needed peripherals
- */
-#define AT91_ALT_BASE_SYS 0xfc069000
-
-/*
- * On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
- */
-#define AT91_AIC 0xfffff000
-#define AT91_PMC 0xfffffc00
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000. (544Kb)
- */
-#define AT91_IO_PHYS_BASE 0xFFF78000
-#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE)
-
-/*
- * On sama5d4, remap the peripherals from address 0xFC069000 .. 0xFC06F000
- * to 0xFB069000 .. 0xFB06F000. (24Kb)
- */
-#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS
-#define AT91_ALT_IO_VIRT_BASE IOMEM(0xFB069000)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE)
-
-#define AT91_ALT_IO_PHYS_BASE AT91_ALT_BASE_SYS
-#define AT91_ALT_IO_VIRT_BASE IOMEM(AT91_ALT_BASE_SYS)
-#endif
-
-#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-#define AT91_ALT_IO_P2V(x) ((x) - AT91_ALT_IO_PHYS_BASE + AT91_ALT_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_ALT_VA_BASE_SYS AT91_ALT_IO_P2V(AT91_ALT_BASE_SYS)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX SZ_1M
-#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0 0x10000000
-#define AT91_CHIPSELECT_1 0x20000000
-#define AT91_CHIPSELECT_2 0x30000000
-#define AT91_CHIPSELECT_3 0x40000000
-#define AT91_CHIPSELECT_4 0x50000000
-#define AT91_CHIPSELECT_5 0x60000000
-#define AT91_CHIPSELECT_6 0x70000000
-#define AT91_CHIPSELECT_7 0x80000000
-
-/* Clocks */
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-/*
- * FIXME: this is needed to communicate between the pinctrl driver and
- * the PM implementation in the machine. Possibly part of the PM
- * implementation should be moved down into the pinctrl driver and get
- * called as part of the generic suspend/resume path.
- */
-#ifndef __ASSEMBLY__
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#endif
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index de17f59ae67d..eeb23695fb04 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -30,11 +30,18 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-
#include "generic.h"
#include "pm.h"
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+
static struct {
unsigned long uhp_udp_mask;
int memctrl;
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 556151e85ec4..160ba0d60168 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -14,7 +14,6 @@
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
-#include <mach/hardware.h>
#include <mach/at91_ramc.h>
/*
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index d7593d572a77..57652a115765 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -16,8 +16,6 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/hardware.h>
-
#include "generic.h"
#include "soc.h"
--
2.1.0
^ permalink raw reply related [flat|nested] 12+ messages in thread