From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] mfd: Fix all W=1 warnings
Date: Thu, 15 Sep 2016 13:35:30 +0200 [thread overview]
Message-ID: <5506538.euWBouSNJd@wuerfel> (raw)
In-Reply-To: <20160915104521.14286-1-lee.jones@linaro.org>
On Thursday, September 15, 2016 11:45:14 AM CEST Lee Jones wrote:
> It really is as simple as it sounds!
>
I seem to have one that you didn't find.
Arnd
8<--------
>From 6c63171eba728fc6d8bc6358884deaccd4cee33d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 4 Aug 2016 15:28:51 +0200
Subject: [PATCH] mfd: tps65912: move regmap config into core driver
When building with extra warnings enabled, most files including
linux/mfd/tps65912.h warn about a static variable defined in the
header:
include/linux/mfd/tps65912.h:331:35: warning: 'tps65912_regmap_config' defined but not used [-Wunused-const-variable=]
We also duplicate the data structure between the i2c and spi front-end
drivers. Moving it into the driver code avoids the warning and
the duplication.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index a88cfa80dbc4..f33567bc428d 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -77,6 +77,23 @@ static struct regmap_irq_chip tps65912_irq_chip = {
.init_ack_masked = true,
};
+static const struct regmap_range tps65912_yes_ranges[] = {
+ regmap_reg_range(TPS65912_INT_STS, TPS65912_GPIO5),
+};
+
+static const struct regmap_access_table tps65912_volatile_table = {
+ .yes_ranges = tps65912_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(tps65912_yes_ranges),
+};
+
+const struct regmap_config tps65912_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_table = &tps65912_volatile_table,
+};
+EXPORT_SYMBOL_GPL(tps65912_regmap_config);
+
int tps65912_device_init(struct tps65912 *tps)
{
int ret;
diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h
index 1a603701550e..b25d0297ba88 100644
--- a/include/linux/mfd/tps65912.h
+++ b/include/linux/mfd/tps65912.h
@@ -319,21 +319,7 @@ struct tps65912 {
struct regmap_irq_chip_data *irq_data;
};
-static const struct regmap_range tps65912_yes_ranges[] = {
- regmap_reg_range(TPS65912_INT_STS, TPS65912_GPIO5),
-};
-
-static const struct regmap_access_table tps65912_volatile_table = {
- .yes_ranges = tps65912_yes_ranges,
- .n_yes_ranges = ARRAY_SIZE(tps65912_yes_ranges),
-};
-
-static const struct regmap_config tps65912_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .cache_type = REGCACHE_RBTREE,
- .volatile_table = &tps65912_volatile_table,
-};
+extern const struct regmap_config tps65912_regmap_config;
int tps65912_device_init(struct tps65912 *tps);
int tps65912_device_exit(struct tps65912 *tps);
next prev parent reply other threads:[~2016-09-15 11:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-15 10:45 [PATCH 0/7] mfd: Fix all W=1 warnings Lee Jones
2016-09-15 10:45 ` [PATCH 1/7] mfd: max8997-irq: 'inline' should be at the beginning of the declaration Lee Jones
2016-09-15 11:28 ` Arnd Bergmann
2016-09-15 10:45 ` [PATCH 2/7] mfd: ab8500-debugfs: Prevent initialised field from being over-written Lee Jones
2016-09-15 11:31 ` Arnd Bergmann
2016-09-15 10:45 ` [PATCH 3/7] mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls Lee Jones
2016-10-06 20:35 ` Ulf Hansson
2016-09-15 10:45 ` [PATCH 4/7] mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() Lee Jones
2016-09-15 10:45 ` [PATCH 5/7] mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() Lee Jones
2016-09-15 10:45 ` [PATCH 6/7] mfd: omap-usb-host: Return value is not 'const int' Lee Jones
2016-09-15 11:33 ` Arnd Bergmann
2016-09-15 10:45 ` [PATCH 7/7] mfd: cros_ec_spi: Remove unused variable 'request' Lee Jones
2016-09-15 11:35 ` Arnd Bergmann [this message]
2016-10-26 12:27 ` [PATCH 0/7] mfd: Fix all W=1 warnings Lee Jones
2016-09-15 12:44 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5506538.euWBouSNJd@wuerfel \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox