From mboxrd@z Thu Jan  1 00:00:00 1970
From: kishon@ti.com (Kishon Vijay Abraham I)
Date: Wed, 18 Mar 2015 20:22:34 +0530
Subject: [PATCH v5 2/2] ARM: dts: sun9i: optimus: Switch to phy core
 regulator bindings for usb phys
In-Reply-To: <1426305437-15208-3-git-send-email-wens@csie.org>
References: <1426305437-15208-1-git-send-email-wens@csie.org>
 <1426305437-15208-3-git-send-email-wens@csie.org>
Message-ID: <55099132.9080508@ti.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org



On Saturday 14 March 2015 09:27 AM, Chen-Yu Tsai wrote:
> Since the phy core already supports specifying a regulator to handle
> during power up/down, it was decided to drop the regulator support
> in the sun9i usb phy driver.
>
> This patch switches the DT to the core bindings. This and the phy driver
> would be in the same release and should not be a problem as far as DT
> stability goes.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

looks good..

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

> ---
>   arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> index e53f2656c2d0..c6ca116c59d2 100644
> --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
> +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
> @@ -203,7 +203,7 @@
>   };
>
>   &usbphy1 {
> -	vbus-supply = <&reg_usb1_vbus>;
> +	phy-supply = <&reg_usb1_vbus>;
>   	status = "okay";
>   };
>
> @@ -212,6 +212,6 @@
>   };
>
>   &usbphy3 {
> -	vbus-supply = <&reg_usb3_vbus>;
> +	phy-supply = <&reg_usb3_vbus>;
>   	status = "okay";
>   };
>