[PATCH] ARM: mvebu: Conform L2CC node with ePAPR specification by adding cache-level

[gregory.clement@free-electrons.com (Gregory CLEMENT)]

Hi,

On 17/03/2015 17:33, Gregory CLEMENT wrote:
> For L2 cache controller node, cache-level property is mandatory. Let's
> add it to Armada 370 and Armada XP device tree.
> 

unless someone is against it, I will apply it on mvebu/dt tomorrow.

Thanks,

Gregory

> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
>  arch/arm/boot/dts/armada-370.dtsi | 1 +
>  arch/arm/boot/dts/armada-xp.dtsi  | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
> index 27397f151def..b38bfa03d3bf 100644
> --- a/arch/arm/boot/dts/armada-370.dtsi
> +++ b/arch/arm/boot/dts/armada-370.dtsi
> @@ -129,6 +129,7 @@
>  				compatible = "marvell,aurora-outer-cache";
>  				reg = <0x08000 0x1000>;
>  				cache-id-part = <0x100>;
> +				cache-level = <2>;
>  				cache-unified;
>  				wt-override;
>  			};
> diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
> index 82917236a2fb..9806046dde1e 100644
> --- a/arch/arm/boot/dts/armada-xp.dtsi
> +++ b/arch/arm/boot/dts/armada-xp.dtsi
> @@ -78,6 +78,7 @@
>  				compatible = "marvell,aurora-system-cache";
>  				reg = <0x08000 0x1000>;
>  				cache-id-part = <0x100>;
> +				cache-level = <2>;
>  				cache-unified;
>  				wt-override;
>  			};
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com