From mboxrd@z Thu Jan 1 00:00:00 1970 From: frowand.list@gmail.com (Frank Rowand) Date: Wed, 18 Mar 2015 20:31:50 -0700 Subject: [patch 1/7] dt: dtb version: consolidate documentation of chosen node bindings In-Reply-To: <550A42AC.8060104@gmail.com> References: <550A42AC.8060104@gmail.com> Message-ID: <550A4326.2070801@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Frank Rowand Documentation of bindings in node /chosen are scattered in several bindings files. If not already in Documentation/devicetree/bindings/chosen.txt, add a pointer in that file to where the property and node bindings are described. This is a clean up in anticipation of adding another node binding in /chosen. Signed-off-by: Frank Rowand --- Documentation/devicetree/bindings/chosen.txt | 31 +++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) Index: b/Documentation/devicetree/bindings/chosen.txt =================================================================== --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -44,3 +44,34 @@ Implementation note: Linux will look for on PowerPC "stdout" if "stdout-path" is not found. However, the "linux,stdout-path" and "stdout" properties are deprecated. New platforms should only use the "stdout-path" property. + + +Properties documented in other bindings +--------------------------------------- +#address-cells video/simple-framebuffer-sunxi.txt + +#size-cells video/simple-framebuffer-sunxi.txt + +bootargs booting-without-of.txt + usage-model.txt + +initrd-end usage-model.txt +initrd-start usage-model.txt + +interrupt-controller (obsolete) booting-without-of.txt + +linux,pci-probe-only pci/host-generic-pci.txt + +linux,stdout-path booting-without-of.txt + +ranges video/simple-framebuffer-sunxi.txt + +stdout-path video/simple-framebuffer.txt + + +Nodes documented in other bindings +---------------------------------- +framebuffer video/simple-framebuffer.txt + video/simple-framebuffer-sunxi.txt + +linux,sysrq-reset-seq input/input-reset.txt