[PATCH/RFC 1/5] clk: shmobile: mstp: Never disable INTC-SYS

[marc.zyngier@arm.com (Marc Zyngier)]

On 25/03/15 04:17, Geert Uytterhoeven wrote:
> Hi Mike,
> 
> On Wed, Mar 25, 2015 at 12:25 AM, Michael Turquette
> <mturquette@linaro.org> wrote:
>> Quoting Geert Uytterhoeven (2015-03-18 12:16:00)
>>> INTC-SYS is the module clock for the GIC.  Accessing the GIC while it is
>>> disabled causes:
>>>
>>>     Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
>>>
>>> Currently, the GIC driver cannot enable its module clock for several
>>> reasons:
>>>   - It does not use a platform device, so Runtime PM is not an option,
>>>   - gic_of_init() runs before any clocks are registered, so it cannot
>>>     explicitly enable the clock,
>>>   - gic_of_init() cannot return -EPROBE_DEFER, as IRQCHIP_DECLARE()
>>>     doesn't support deferred probing.
>>>
>>> Hence we have to keep on relying on the boot loader for enabling the
>>> module clock.
>>>
>>> To prevent the module clock from being disabled when the CCF core thinks
>>> it is unused, and thus causing a system lock-up, add a quirk to the MSTP
>>> clock driver to make sure the module clock is never disabled.
>>>
>>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>>> ---
>>>  drivers/clk/shmobile/clk-mstp.c | 6 ++++++
>>>  1 file changed, 6 insertions(+)
>>>
>>> diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c
>>> index 2d2fe773ac8168f9..742af84735a07450 100644
>>> --- a/drivers/clk/shmobile/clk-mstp.c
>>> +++ b/drivers/clk/shmobile/clk-mstp.c
>>> @@ -62,6 +62,12 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
>>>         unsigned int i;
>>>         u32 value;
>>>
>>> +       /* INTC-SYS is the module clock of the GIC, and must not be disabled */
>>> +       if (!enable && !strcmp(__clk_get_name(hw->clk), "intc-sys")) {
>>> +               pr_debug("MSTP %pC skipping disable\n", hw->clk);
>>> +               return 0;
>>> +       }
>>
>> Hello Geert,
>>
>> This is a bit ugly for three reasons:
>>
>> 1) we hit this code for every MSTP clock {en,dis}able call
>> 2) __clk_get_name is kind of gross
> 
> Sure, this is ugly. That's why this was an RFC.
> I was mainly trying to trigger a reply from the GIC maintainers ;-)

Given that I'm the only GIC-related person on the cc list, I suppose
this is puts me on the spot.

This doesn't touch the GIC code at all, so I don't feel completely
adverse to it. My only gripe is with the undocumented clock property in
the binding, and that leads to two questions:

- the GIC architecture doesn't mention a clock at all, so that's a
Renesas special. Do we want to have a vendor-specific property for this?
Or does it belong elsewhere?
- alternatively, do we want the core GIC code to deal with this? In
which case, how do we express the policy?

Thanks,

	M.

>> 3) the enable_count will not be correct. It will be zero but the clock
>> will actually be enabled
> 
> That's indeed something I didn't take into account. Will change to just enabling
> the clock from the clock driver.
> 
>> Have you considered Lee's series to express these always-on clocks in
>> DT? See,
>>
>> https://lkml.org/lkml/2015/2/24/495
> 
> That solution doesn't apply here, as we do have a correct description
> of the hardware
> in DT (after the other patches in the series, like e.g. (courtesy for
> Lee) http://permalink.gmane.org/gmane.linux.power-management.general/58123).
> 
> Thanks!
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 


-- 
Jazz is not dead. It just smells funny...