From mboxrd@z Thu Jan  1 00:00:00 1970
From: jonas@microbit.se (Jonas Andersson)
Date: Fri, 27 Mar 2015 10:28:37 +0100
Subject: at91 clocks
In-Reply-To: <5512FBEB.2060609@atmel.com>
References: <55117568.6090202@microbit.se>
 <20150325013201.3f01fc22@bbrezillon> <55127AA6.5050902@microbit.se>
 <20150325173751.0d6479df@bbrezillon> <5512FBEB.2060609@atmel.com>
Message-ID: <551522C5.50202@microbit.se>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Nicolas,

On 2015-03-25 19:18, Nicolas Ferre wrote:
> I tried kernel 4.0-rc5 but it hangs in boot after ethernet init.
>> Is this related to the changes I suggested ?
> It seems to be related as I tried to boot an at91sam9260ek with current
> Linus' tree and it doesn't hangs after Ethernet on my side...
>
Could you send me your dts and .config? I can not boot any unmodified 
4.0 rc on my board. Tested rc1, rc4, rc5, HEAD.

Output
...
[    1.730000] macb fffc4000.ethernet eth0: attached PHY driver [Generic 
PHY] (mii_bus:phy_addr=fffc4000.etherne:00, irq=-1)
[   82.570000] random: nonblocking pool is initialized

Best regards
  Jonas