NXP LPC3250 broken?

[stigge@antcom.de (Roland Stigge)]

Hi,

have you tried to compare with an NXP dev kit?

I also have an EA board but not currently connected. Will need to test
when I have access to it again.

Thanks for reporting,

Roland


On 04/12/2015 04:20 PM, Joachim Eastwood wrote:
> Hi,
> 
> I recently got a Embedded Artist LPC3250 (ea3250.dts) board that I
> wanted to test mainline Linux on.
> 
> But with lpc32xx_defconfig, ea3250.dts and the latest rc (v4.0-rc7) I am
> not getting very far.
> 
> First I got a "kernel NULL pointer dereference". See
> http://slexy.org/raw/s211rzbZL1
> I got around this one by disabling the leds-gpio driver.
> 
> Then, without leds-gpio, I get an endless stream of "unexpected IRQ trap
> at vector 00" messages.
> See: http://slexy.org/raw/s2S5Z9TtoV
> 
> I also tried an older kernel (3.18). This one seemed at first to hang
> but after a short while I got lots of backtraces which seem to involve
> rcu, tick and timer interrupt.
> See: http://slexy.org/raw/s2024RXCkX
> 
> Does anyone got any ideas on what may be going on?
> 
> 
> When I get a bit more time to play around with the kit I will try even
> older kernels to see if I can get it working at all.
> 
> best regards,
> Joachim Eastwood