[PATCH] ARM: sunxi: Enable simplefb in the defconfig

[PATCH] ARM: sunxi: Enable simplefb in the defconfig

[Maxime Ripard]

Now that we have simplefb support, we can enable it in our defconfig. Also
enable the framebuffer console, so that we are sure that we actually get
something displayed in any case.

And while we're at it, enable the module support.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/configs/sunxi_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 2c7af0a57cb1..7ebc346bf9fa 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -2,6 +2,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
@@ -86,6 +87,10 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
-- 
2.3.5

[PATCH] ARM: sunxi: Enable simplefb in the defconfig

[Hans de Goede]

Hi,

On 20-04-15 21:48, Maxime Ripard wrote:
> Now that we have simplefb support, we can enable it in our defconfig. Also
> enable the framebuffer console, so that we are sure that we actually get
> something displayed in any case.
>
> And while we're at it, enable the module support.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Makes sense:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> ---
>   arch/arm/configs/sunxi_defconfig | 5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
> index 2c7af0a57cb1..7ebc346bf9fa 100644
> --- a/arch/arm/configs/sunxi_defconfig
> +++ b/arch/arm/configs/sunxi_defconfig
> @@ -2,6 +2,7 @@ CONFIG_NO_HZ=y
>   CONFIG_HIGH_RES_TIMERS=y
>   CONFIG_BLK_DEV_INITRD=y
>   CONFIG_PERF_EVENTS=y
> +CONFIG_MODULES=y
>   CONFIG_ARCH_SUNXI=y
>   CONFIG_SMP=y
>   CONFIG_NR_CPUS=8
> @@ -86,6 +87,10 @@ CONFIG_REGULATOR=y
>   CONFIG_REGULATOR_FIXED_VOLTAGE=y
>   CONFIG_REGULATOR_AXP20X=y
>   CONFIG_REGULATOR_GPIO=y
> +CONFIG_FB=y
> +CONFIG_FB_SIMPLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
>   CONFIG_USB=y
>   CONFIG_USB_EHCI_HCD=y
>   CONFIG_USB_EHCI_HCD_PLATFORM=y
>

[PATCH] ARM: sunxi: Enable simplefb in the defconfig

[Maxime Ripard]

On Mon, Apr 20, 2015 at 09:48:40PM +0200, Maxime Ripard wrote:
> Now that we have simplefb support, we can enable it in our defconfig. Also
> enable the framebuffer console, so that we are sure that we actually get
> something displayed in any case.
> 
> And while we're at it, enable the module support.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Applied.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150427/7e81f59d/attachment.sig>