From: bintian.wang@huawei.com (Bintian)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/5] arm64: dts: Add dts files for Hisilicon Hi6220 SoC
Date: Wed, 6 May 2015 14:50:52 +0800 [thread overview]
Message-ID: <5549B9CC.1040709@huawei.com> (raw)
In-Reply-To: <5549877C.10408@huawei.com>
Hello Mark,
On 2015/5/6 11:16, Bintian wrote:
> Hello Mark,
>
> On 2015/5/6 1:13, Mark Rutland wrote:
[...]
>>> + uart0: uart at f8015000 { /* console */
>>> + compatible = "arm,pl011", "arm,primecell";
>>> + reg = <0x0 0xf8015000 0x0 0x1000>;
>>> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&ao_ctrl HI6220_UART0_PCLK>, <&ao_ctrl
>>> HI6220_UART0_PCLK>;
>>> + clock-names = "uartclk", "apb_pclk";
>>> + };
>>
>> In a previous discussion [1] the UART on HI6220 was described as not
>> fully PL011 compliant, with a number of differences (e.g. the FIFO
>> length).
>>
>> Given that, I feel somewhat uncomfortable with the current compatible
>> string list. What exactly are those differences? We may need a more
>> specific compatible string (even if in addition to those existing ones),
>> or perhaps other properties.
> The small system can be booted and the console also works well without
> changing any code of driver amba-pl011.c, so I think the compatible
> string is OK for this patch set.
>
> Hisilicon do some performance enhancements based on PL011, but the
> current driver "amba-pl011.c" also works on hi6220 without those
> enhancements driver code.
Checked with Hisilicon chip designer, the UART0 is used for DEBUG
console and compliant with PL011 fully.
Thanks,
Bintian
>
>>
>> Thanks,
>> Mark.
>>
>> [1]
>> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328978.html
>>
>>
>> .
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> .
>
next prev parent reply other threads:[~2015-05-06 6:50 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-05 12:06 [PATCH v4 0/5] arm64,hi6220: Enable Hisilicon Hi6220 SoC Bintian Wang
2015-05-05 12:06 ` [PATCH v4 1/5] arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig Bintian Wang
2015-05-05 12:06 ` [PATCH v4 2/5] arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC Bintian Wang
2015-05-15 0:27 ` Stephen Boyd
2015-05-15 1:31 ` Bintian
2015-05-05 12:06 ` [PATCH v4 3/5] clk: hi6220: Document devicetree bindings for hi6220 clock Bintian Wang
2015-05-15 0:26 ` Stephen Boyd
2015-05-05 12:06 ` [PATCH v4 4/5] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC Bintian Wang
2015-05-15 0:25 ` Stephen Boyd
2015-05-15 7:42 ` Bintian
2015-05-15 19:30 ` Stephen Boyd
2015-05-16 2:54 ` Brent Wang
2015-05-19 20:35 ` Stephen Boyd
2015-05-20 0:52 ` Bintian
2015-05-05 12:06 ` [PATCH v4 5/5] arm64: dts: Add dts files for Hisilicon Hi6220 SoC Bintian Wang
2015-05-05 17:13 ` Mark Rutland
2015-05-06 3:16 ` Bintian
2015-05-06 3:51 ` Leo Yan
2015-05-06 9:20 ` Mark Rutland
2015-05-06 11:17 ` Leo Yan
2015-05-06 6:50 ` Bintian [this message]
2015-05-06 9:30 ` Mark Rutland
2015-05-06 10:36 ` Bintian
2015-05-06 10:55 ` Mark Rutland
2015-05-06 15:31 ` Brent Wang
2015-05-06 15:44 ` Mark Rutland
2015-05-06 16:03 ` Brent Wang
2015-05-06 16:23 ` Mark Rutland
2015-05-06 17:15 ` Brent Wang
2015-05-07 7:24 ` Bintian
2015-05-13 7:12 ` Bintian Wang
2015-05-13 7:30 ` Bintian
2015-05-06 10:38 ` Haojian Zhuang
2015-05-06 11:01 ` Mark Rutland
2015-05-05 13:45 ` [PATCH v4 0/5] arm64,hi6220: Enable " Haojian Zhuang
2015-05-05 23:46 ` Tyler Baker
2015-05-06 10:46 ` Bintian
2015-05-07 9:02 ` Will Deacon
2015-05-07 9:29 ` Bintian
2015-05-07 11:25 ` Will Deacon
2015-05-07 11:55 ` Leo Yan
2015-05-07 12:01 ` Bintian
2015-05-07 12:57 ` Will Deacon
2015-05-07 13:06 ` Bintian
2015-05-07 9:33 ` Haojian Zhuang
2015-05-07 10:44 ` Jorge Ramirez-Ortiz
2015-05-13 7:33 ` Bintian
2015-05-13 9:16 ` Will Deacon
2015-05-13 9:19 ` Arnd Bergmann
2015-05-13 10:17 ` Bintian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5549B9CC.1040709@huawei.com \
--to=bintian.wang@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).