[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Wei Xu]

Hi Arnd, Hi Olof, Hi Kevin,

Please help to merge pull request for hisilicon hip04 soc and
D01 board DT updates for v4.2.

Thanks!

Best Regards,
Wei

The following changes since commit b787f68c36d49bb1d9236f403813641efa74a031:

  Linux 4.1-rc1 (2015-04-26 17:59:10 -0700)

are available in the git repository at:

  git://github.com/hisilicon/linux-hisi.git tags/hip04-dt-for-4.2

for you to fetch changes up to 9fac45c16c33f9f822ed7f9b9660890f68f16d8b:

  ARM: dts: add HiSilicon hip04 ethernet controller resource (2015-05-08 01:57:51 +0100)

----------------------------------------------------------------
ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2

- Add hip04 GPIO nodes
- Add NANDC nodes for hip04 and D01 board
- Add hip04 ethernet related nodes

----------------------------------------------------------------
Fathi Boudra (1):
      ARM: dts: add HiSilicon hip04 ethernet controller resource

Zhou Wang (2):
      ARM: dts: hip04: add GPIO pieces
      mtd: hisilicon: add device tree node for NAND controller

 arch/arm/boot/dts/hip04-d01.dts |  27 +++++++++++++++++++++++++++
 arch/arm/boot/dts/hip04.dtsi    | 133 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 160 insertions(+)

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Arnd Bergmann]

On Friday 08 May 2015 15:26:09 Wei Xu wrote:
> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
> 
> - Add hip04 GPIO nodes
> - Add NANDC nodes for hip04 and D01 board
> - Add hip04 ethernet related nodes
> 
> 

Pulled into next/dt, thanks!

	Arnd

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Wei Xu]

On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>
>> - Add hip04 GPIO nodes
>> - Add NANDC nodes for hip04 and D01 board
>> - Add hip04 ethernet related nodes
>>
>>

Hi Arnd,

> Pulled into next/dt, thanks!

Thanks!

Best Regards,
Wei

> 	Arnd
> 
> .
> 

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Tyler Baker]

Hi Wei/Arnd,

On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>
>
> On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
>> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>>
>>> - Add hip04 GPIO nodes
>>> - Add NANDC nodes for hip04 and D01 board
>>> - Add hip04 ethernet related nodes
>>>
>>>
>
> Hi Arnd,
>
>> Pulled into next/dt, thanks!

When this was pulled into arm-soc, the kernelci.org bot reported
hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
and double check the status of -next in case there were needed
dependencies from other trees. However, now there are the same
hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
these boot failures down to...

828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
Author: Zhou Wang <wangzhou.bry@gmail.com>
Date:   Wed Mar 25 14:57:45 2015 +0800

    ARM: dts: hip04: add GPIO pieces

    Hisilicon Soc hip04 has four GPIO controllers, each one has 32
    GPIOs and can be configured to be an interrupt controller.The GPIO
    controllers are compatible with the snps,dw-apb-gpio driver.
    This patch add the corresponding device tree nodes.

    Acked-by: Linus Walleij <linus.walleij@linaro.org>
    Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
    Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

This commit does not revert cleanly from -next, so I reverted all
three commits in this pull request on top of next-20150513 and this
get the hip04-d01 booting again.

>
> Thanks!
>
> Best Regards,
> Wei
>
>>       Arnd
>>
>> .
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Tyler

[1] http://kernelci.org/boot/all/job/arm-soc/kernel/v4.1-rc3-170-g28837bc3e732/
[2] http://kernelci.org/boot/all/job/next/kernel/next-20150513/
[3] https://ci.linaro.org/view/people/job/tbaker-boot-bisect-bot/28/console

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Arnd Bergmann]

On Wednesday 13 May 2015 12:20:28 Tyler Baker wrote:
> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
> > On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
> >> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
> >>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
> >>>
> >>> - Add hip04 GPIO nodes
> >>> - Add NANDC nodes for hip04 and D01 board
> >>> - Add hip04 ethernet related nodes
> >>>
> 
> When this was pulled into arm-soc, the kernelci.org bot reported
> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
> and double check the status of -next in case there were needed
> dependencies from other trees. However, now there are the same
> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
> these boot failures down to...
> 
> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
> Author: Zhou Wang <wangzhou.bry@gmail.com>
> Date:   Wed Mar 25 14:57:45 2015 +0800
> 
>     ARM: dts: hip04: add GPIO pieces
> 
>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>     GPIOs and can be configured to be an interrupt controller.The GPIO
>     controllers are compatible with the snps,dw-apb-gpio driver.
>     This patch add the corresponding device tree nodes.
> 
>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
> 
> This commit does not revert cleanly from -next, so I reverted all
> three commits in this pull request on top of next-20150513 and this
> get the hip04-d01 booting again.
> 

Ok, thanks for the report!

Wei, can you send a bug fix, or should I revert that branch for now?

	Arnd

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Wei Xu]

On 5/13/2015 8:31 PM, Arnd Bergmann wrote:
> On Wednesday 13 May 2015 12:20:28 Tyler Baker wrote:
>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>>> On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
>>>> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>>>>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>>>>
>>>>> - Add hip04 GPIO nodes
>>>>> - Add NANDC nodes for hip04 and D01 board
>>>>> - Add hip04 ethernet related nodes
>>>>>
>>
>> When this was pulled into arm-soc, the kernelci.org bot reported
>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
>> and double check the status of -next in case there were needed
>> dependencies from other trees. However, now there are the same
>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
>> these boot failures down to...
>>
>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
>> Author: Zhou Wang <wangzhou.bry@gmail.com>
>> Date:   Wed Mar 25 14:57:45 2015 +0800
>>
>>     ARM: dts: hip04: add GPIO pieces
>>
>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>>     GPIOs and can be configured to be an interrupt controller.The GPIO
>>     controllers are compatible with the snps,dw-apb-gpio driver.
>>     This patch add the corresponding device tree nodes.
>>
>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>>
>> This commit does not revert cleanly from -next, so I reverted all
>> three commits in this pull request on top of next-20150513 and this
>> get the hip04-d01 booting again.
>>
> 
> Ok, thanks for the report!

Hi Tyler,

Thanks for the report!
I will reconfirm it again.

Hi Arnd,

> Wei, can you send a bug fix, or should I revert that branch for now?

I will try to resolve it tomorrow.
If I could not resolve it by the end of tomorrow,
I will send a mail to you to ask for reverting.
Do you think is it OK?
Thanks!

Best Regards,
Wei

> 	Arnd
> 
> .
> 

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Arnd Bergmann]

On Wednesday 13 May 2015 23:19:50 Wei Xu wrote:
> 
> On 5/13/2015 8:31 PM, Arnd Bergmann wrote:
> > Wei, can you send a bug fix, or should I revert that branch for now?
> 
> I will try to resolve it tomorrow.
> If I could not resolve it by the end of tomorrow,
> I will send a mail to you to ask for reverting.
> Do you think is it OK?

Yes, that's great, thanks for looking into it!

	Arnd

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Wei Xu]

On 5/13/2015 8:20 PM, Tyler Baker wrote:
> Hi Wei/Arnd,
> 
> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>>
>>
>> On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
>>> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>>>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>>>
>>>> - Add hip04 GPIO nodes
>>>> - Add NANDC nodes for hip04 and D01 board
>>>> - Add hip04 ethernet related nodes
>>>>
>>>>
>>
>> Hi Arnd,
>>
>>> Pulled into next/dt, thanks!
> 
> When this was pulled into arm-soc, the kernelci.org bot reported
> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
> and double check the status of -next in case there were needed
> dependencies from other trees. However, now there are the same
> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
> these boot failures down to...
> 
> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
> Author: Zhou Wang <wangzhou.bry@gmail.com>
> Date:   Wed Mar 25 14:57:45 2015 +0800
> 
>     ARM: dts: hip04: add GPIO pieces
> 
>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>     GPIOs and can be configured to be an interrupt controller.The GPIO
>     controllers are compatible with the snps,dw-apb-gpio driver.
>     This patch add the corresponding device tree nodes.
> 
>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Hi Tyler,

> This commit does not revert cleanly from -next, so I reverted all
> three commits in this pull request on top of next-20150513 and this
> get the hip04-d01 booting again.

It is a little strange.
I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
and compiled with "hisi_defconfig".

It is booting OK and the log is as below.
And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
Could you please confirm it again?
Thanks!

Best Regards,
Wei

/ # SC00$
DDR INIT OK!!!
GPIO INIT OK!!!
Boot firmware EVB_SECURE_UEFI_BIOS built at 21:21:53 on May  6 2015
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/HisiPkg/D01BoardPkg/Sec/Sec/Sec/DEBUG/ArmPlatformSec.dll 0xF0100180
Trust Zone Configuration is disabled
UEFI firmware (version EVB_SECURE_UEFI_BIOS built at 18:53:44 on May  6 2015)
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0xF0120180
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8000
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0x6FA83240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0x6FA9F240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0x6FA7E240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe/DEBUG/EmuVariableRuntimeDxe.dll 0x6FA97240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll 0x6FA93240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0x6AAC9240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0x6AAC3240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0x6FA79240
add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0x6FA61240
NandFlashInit start
[NANDFlash]  Vendor[0]: MICRON,       MakerCode[0]:    0x0002C
[NANDFlash]  ChipSize[0]: 0x20000000, BlockSize[0]:    0x20000
[NANDFlash]  PageSize[0]: 0x00000800, PagePerBlock[0]: 0x00040
NAND Flash Init OK! Status = Success

Auto boot or not ?(Press 's' to Boot Menu)
Now wait for 2 seconds...

Not Press 's', Start Auto Boot!

Transmit  OS from FLASH to DDR now, please wait![CopyNandToMem : 509]
[CopyNandToMem : 533]PageNumCopy = 1400!

The .kernel file is transmitted ok!

Copy Bootwrapper from FLASH to SRAM...[CopyNandToMem : 509]
[CopyNandToMem : 533]PageNumCopy = 40!

The .text file is transmitted ok!
[CopyNandToMem : 509]
[CopyNandToMem : 533]PageNumCopy = 40!
The .monitor file is transmitted ok!
[CopyNandToMem : 509]
[CopyNandToMem : 533]PageNumCopy = 3000!
THE .FILESYSTEM FILE IS TRANSMITTED OK!
MOVE PC TEXT_SRAM_BASE
C01$
&#C02$
&#C03$
&#C10$
&#C11$
&#C12$
&#C13$
&#C20$
&#C21$
&#C22$
&#C23$
&#C30$
&#C31$
&#C32$
&#C33$
&#[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.0-rc3-00364-g28837bc (joyx at f00297740a) (gcc version 4.9.1 20140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 2014.05) ) #10 SMP PREEMPT Thu May 14 5
[    0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Hisilicon D01 Development Board
[    0.000000] Ignoring memory block 0x4c0000000 - 0x800000000
[    0.000000] earlycon: no match for ttyS0,115200
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @edf46000 s15040 r0 d21824 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 784912
[    0.000000] Kernel command line: console=ttyS0,115200 initrd=0x10d00000,0x1800000 rdinit=/linuxrc earlyprintk
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 3089052K/3145728K available (4416K kernel code, 148K rwdata, 920K rodata, 220K init, 241K bss, 56676K reserved, 0K cma-reserved, 2367488K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]       .text : 0xc0008000 - 0xc053e2ac   (5337 kB)
[    0.000000]       .init : 0xc053f000 - 0xc0576000   ( 220 kB)
[    0.000000]       .data : 0xc0576000 - 0xc059b240   ( 149 kB)
[    0.000000]        .bss : 0xc059e000 - 0xc05da504   ( 242 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000012] Switching to timer-based delay loop, resolution 20ns
[    0.000082] clocksource arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 38225208935 ns
[    0.000100] sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 42949672950ns
[    0.000892] Console: colour dummy device 80x30
[    0.000969] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
[    0.001007] pid_max: default: 32768 minimum: 301
[    0.001276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001302] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002711] CPU: Testing write buffer coherency: ok
[    0.003235] /cpus/cpu at 0 missing clock-frequency property
[    0.003279] /cpus/cpu at 1 missing clock-frequency property
[    0.003324] /cpus/cpu at 2 missing clock-frequency property
[    0.003370] /cpus/cpu at 3 missing clock-frequency property
[    0.003420] /cpus/cpu at 100 missing clock-frequency property
[    0.003474] /cpus/cpu at 101 missing clock-frequency property
[    0.003533] /cpus/cpu at 102 missing clock-frequency property
[    0.003597] /cpus/cpu at 103 missing clock-frequency property
[    0.003665] /cpus/cpu at 200 missing clock-frequency property
[    0.003737] /cpus/cpu at 201 missing clock-frequency property
[    0.003814] /cpus/cpu at 202 missing clock-frequency property
[    0.003892] /cpus/cpu at 203 missing clock-frequency property
[    0.003976] /cpus/cpu at 300 missing clock-frequency property
[    0.004065] /cpus/cpu at 301 missing clock-frequency property
[    0.004158] /cpus/cpu at 302 missing clock-frequency property
[    0.004255] /cpus/cpu at 303 missing clock-frequency property
[    0.004284] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004418] Setting up static identity map for 0x10008280 - 0x100082d8
[    0.004716] HiP04 MCPM initialized
[    0.270900] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.338352] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.405920] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.473505] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.541041] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.608577] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.676148] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.743715] CPU8: thread -1, cpu 0, socket 2, mpidr 80000200
[    0.811255] CPU9: thread -1, cpu 1, socket 2, mpidr 80000201
[    0.878793] CPU10: thread -1, cpu 2, socket 2, mpidr 80000202
[    0.946347] CPU11: thread -1, cpu 3, socket 2, mpidr 80000203
[    1.013975] CPU12: thread -1, cpu 0, socket 3, mpidr 80000300
[    1.081452] CPU13: thread -1, cpu 1, socket 3, mpidr 80000301
[    1.149029] CPU14: thread -1, cpu 2, socket 3, mpidr 80000302
[    1.216575] CPU15: thread -1, cpu 3, socket 3, mpidr 80000303
[    1.216795] Brought up 16 CPUs
[    1.216899] SMP: Total of 16 processors activated (1600.00 BogoMIPS).
[    1.216919] CPU: All CPU(s) started in HYP mode.
[    1.216937] CPU: Virtualization extensions available.
[    1.218912] devtmpfs: initialized
[    1.251514] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    1.252528] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.252759] pinctrl core: initialized pinctrl subsystem
[    1.270099] NET: Registered protocol family 16
[    1.270878] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    1.292650] Serial: AMBA PL011 UART driver
[    1.314826] SCSI subsystem initialized
[    1.316126] usbcore: registered new interface driver usbfs
[    1.316282] usbcore: registered new interface driver hub
[    1.316760] usbcore: registered new device driver usb
[    1.319857] Switched to clocksource arch_sys_counter
[    1.344958] NET: Registered protocol family 2
[    1.346746] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.346931] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.347242] TCP: Hash tables configured (established 8192 bind 8192)
[    1.347441] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.347523] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.348142] NET: Registered protocol family 1
[    1.348941] RPC: Registered named UNIX socket transport module.
[    1.348964] RPC: Registered udp transport module.
[    1.348982] RPC: Registered tcp transport module.
[    1.349001] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.349542] Unpacking initramfs...
[    4.036110] Freeing initrd memory: 24576K (c0d00000 - c2500000)
[    4.041270] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    4.068647] NFS: Registering the id_resolver key type
[    4.068740] Key type id_resolver registered
[    4.068764] Key type id_legacy registered
[    4.069265] bounce: pool size: 64 pages
[    4.069794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.069833] io scheduler noop registered
[    4.069864] io scheduler deadline registered
[    4.070380] io scheduler cfq registered (default)
[    4.217934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    4.222002] console [ttyS0] disabled
[    4.222186] e4007000.uart: ttyS0 at MMIO 0xe4007000 (irq = 413, base_baud = 10500000) is a 16550A
[    6.529131] console [ttyS0] enabled
[    6.542635] [drm] Initialized drm 1.1.0 20060810
[    6.560545] ahci ea000000.sata: controller can't do NCQ, turning off CAP_NCQ
[    6.584199] ahci ea000000.sata: controller can't do FBS, turning off CAP_FBS
[    6.608078] ahci ea000000.sata: SSS flag set, parallel bus scan disabled
[    6.630673] ahci ea000000.sata: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl platform mode
[    6.659316] ahci ea000000.sata: flags: sntf stag pm led clo only pmp slum part ccc sxs boh
[    6.693851] scsi host0: ahci
[    6.704676] scsi host1: ahci
[    6.715455] scsi host2: ahci
[    6.726248] scsi host3: ahci
[    6.736636] ata1: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x100 irq 404
[    6.763580] ata2: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x180 irq 404
[    6.790470] ata3: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x200 irq 404
[    6.817320] ata4: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x280 irq 404
[    8.002404] ata1: SATA link down (SStatus 0 SControl 300)
[    9.251149] ata2: SATA link down (SStatus 0 SControl 300)
[   11.174898] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.296724] ata3.00: ATA-8: ST500LM021-1KJ152, 0001SDM1, max UDMA/133
[   11.318388] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   12.470360] ata3.00: configured for UDMA/133
[   12.525550] scsi 2:0:0:0: Direct-Access     ATA ST500LM021-1KJ15 SDM1 PQ: 0 ANSI: 5
[   12.554663] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   12.579879] sd 2:0:0:0: [sda] 4096-byte physical blocks
[   12.597919] sd 2:0:0:0: [sda] Write Protect is off
[   12.614225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.687389]  sda: sda1 sda2
[   12.699532] sd 2:0:0:0: [sda] Attached SCSI disk
[   13.739898] ata4: SATA link down (SStatus 0 SControl 300)
[   18.127498] libphy: hip04_mdio_bus: probed
[   18.736446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.758364] ehci-platform: EHCI generic platform driver
[   18.776239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.797023] ohci-platform: OHCI generic platform driver
[   18.814956] usbcore: registered new interface driver usb-storage
[   18.835964] mousedev: PS/2 mouse device common for all mice
[   18.855836] failed to find reboot-offset property
[   18.871770] hisi-reboot: probe of e3e00000.sysctrl failed with error -22
[   18.894752] Synopsys Designware Multimedia Card Interface Driver
[   18.916759] usbcore: registered new interface driver usbhid
[   18.935450] usbhid: USB HID core driver
[   18.951098] NET: Registered protocol family 10
[   18.968938] sit: IPv6 over IPv4 tunneling driver
[   18.986387] NET: Registered protocol family 17
[   19.001496] Key type dns_resolver registered
[   19.016036] Registering SWP/SWPB emulation handler
[   19.034460] hctosys: unable to open rtc device (rtc0)
[   19.054127] ttyS0 - failed to request DMA
[   19.068154] Freeing unused kernel memory: 220K (c053f000 - c0576000)
mount: mounting /dev/sda1 on /mnt/sda1 failed: No such file or directory
[RCS]: /etc/init.d/S01udev
Starting mdev...
[   19.984050] random: sshd urandom read with 8 bits of entropy available
/var/empty must be owned by root and not group or world-writable.

Please press Enter to activate this console.
Welcome to HiLinux.
/ # cat /proc/device-tree/soc/
cat: read error: Is a directory
/ # cat /proc/device-tree/soc/
#address-cells                gpio at 4003000/
#size-cells                   interrupt-controller at c01000/
arm-pmu/                      interrupt-parent
compatible                    mdio/
dual_timer at 3000000/           name
ethernet at 2800000/             nand at 4020000/
ethernet at 2880000/             ppe at 28c0000/
ethernet at 28b0000/             ranges
fabric/                       sata at a000000/
gpio at 4000000/                 sysctrl/
gpio at 4001000/                 uart at 4007000/
gpio at 4002000/
/ # cat /proc/device-tree/soc/



>>
>> Thanks!
>>
>> Best Regards,
>> Wei
>>
>>>       Arnd
>>>
>>> .
>>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> Tyler
> 
> [1] http://kernelci.org/boot/all/job/arm-soc/kernel/v4.1-rc3-170-g28837bc3e732/
> [2] http://kernelci.org/boot/all/job/next/kernel/next-20150513/
> [3] https://ci.linaro.org/view/people/job/tbaker-boot-bisect-bot/28/console
> 
> .
> 

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Tyler Baker]

Hi Wei,

On 14 May 2015 at 01:49, Wei Xu <xuwei5@hisilicon.com> wrote:
>
>
> On 5/13/2015 8:20 PM, Tyler Baker wrote:
>> Hi Wei/Arnd,
>>
>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>>>
>>>
>>> On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
>>>> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>>>>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>>>>
>>>>> - Add hip04 GPIO nodes
>>>>> - Add NANDC nodes for hip04 and D01 board
>>>>> - Add hip04 ethernet related nodes
>>>>>
>>>>>
>>>
>>> Hi Arnd,
>>>
>>>> Pulled into next/dt, thanks!
>>
>> When this was pulled into arm-soc, the kernelci.org bot reported
>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
>> and double check the status of -next in case there were needed
>> dependencies from other trees. However, now there are the same
>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
>> these boot failures down to...
>>
>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
>> Author: Zhou Wang <wangzhou.bry@gmail.com>
>> Date:   Wed Mar 25 14:57:45 2015 +0800
>>
>>     ARM: dts: hip04: add GPIO pieces
>>
>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>>     GPIOs and can be configured to be an interrupt controller.The GPIO
>>     controllers are compatible with the snps,dw-apb-gpio driver.
>>     This patch add the corresponding device tree nodes.
>>
>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>
> Hi Tyler,
>
>> This commit does not revert cleanly from -next, so I reverted all
>> three commits in this pull request on top of next-20150513 and this
>> get the hip04-d01 booting again.
>
> It is a little strange.
> I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
> at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
> and compiled with "hisi_defconfig".
>
> It is booting OK and the log is as below.
> And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
> Could you please confirm it again?

It appears we are using different image formats to boot. The link
above shows .kernel, .monitor, .text...can I split the kernel//dtb out
from .kernel?

I am using zImage and hip04-d01.dtb directly[1] with UEFI to TFTP
boot. Could you try this method?

> Thanks!
>
> Best Regards,
> Wei
>
> / # SC00$
> DDR INIT OK!!!
> GPIO INIT OK!!!
> Boot firmware EVB_SECURE_UEFI_BIOS built at 21:21:53 on May  6 2015
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/HisiPkg/D01BoardPkg/Sec/Sec/Sec/DEBUG/ArmPlatformSec.dll 0xF0100180
> Trust Zone Configuration is disabled
> UEFI firmware (version EVB_SECURE_UEFI_BIOS built at 18:53:44 on May  6 2015)
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0xF0120180
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8000
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0x6FA83240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0x6FA9F240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0x6FA7E240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe/DEBUG/EmuVariableRuntimeDxe.dll 0x6FA97240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll 0x6FA93240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0x6AAC9240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0x6AAC3240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0x6FA79240
> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0x6FA61240
> NandFlashInit start
> [NANDFlash]  Vendor[0]: MICRON,       MakerCode[0]:    0x0002C
> [NANDFlash]  ChipSize[0]: 0x20000000, BlockSize[0]:    0x20000
> [NANDFlash]  PageSize[0]: 0x00000800, PagePerBlock[0]: 0x00040
> NAND Flash Init OK! Status = Success
>
> Auto boot or not ?(Press 's' to Boot Menu)
> Now wait for 2 seconds...
>
> Not Press 's', Start Auto Boot!
>
> Transmit  OS from FLASH to DDR now, please wait![CopyNandToMem : 509]
> [CopyNandToMem : 533]PageNumCopy = 1400!
>
> The .kernel file is transmitted ok!
>
> Copy Bootwrapper from FLASH to SRAM...[CopyNandToMem : 509]
> [CopyNandToMem : 533]PageNumCopy = 40!
>
> The .text file is transmitted ok!
> [CopyNandToMem : 509]
> [CopyNandToMem : 533]PageNumCopy = 40!
> The .monitor file is transmitted ok!
> [CopyNandToMem : 509]
> [CopyNandToMem : 533]PageNumCopy = 3000!
> THE .FILESYSTEM FILE IS TRANSMITTED OK!
> MOVE PC TEXT_SRAM_BASE
> C01$
> &#C02$
> &#C03$
> &#C10$
> &#C11$
> &#C12$
> &#C13$
> &#C20$
> &#C21$
> &#C22$
> &#C23$
> &#C30$
> &#C31$
> &#C32$
> &#C33$
> &#[    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 4.1.0-rc3-00364-g28837bc (joyx at f00297740a) (gcc version 4.9.1 20140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 2014.05) ) #10 SMP PREEMPT Thu May 14 5
> [    0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
> [    0.000000] Machine model: Hisilicon D01 Development Board
> [    0.000000] Ignoring memory block 0x4c0000000 - 0x800000000
> [    0.000000] earlycon: no match for ttyS0,115200
> [    0.000000] Memory policy: Data cache writealloc
> [    0.000000] PERCPU: Embedded 9 pages/cpu @edf46000 s15040 r0 d21824 u36864
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 784912
> [    0.000000] Kernel command line: console=ttyS0,115200 initrd=0x10d00000,0x1800000 rdinit=/linuxrc earlyprintk
> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [    0.000000] Memory: 3089052K/3145728K available (4416K kernel code, 148K rwdata, 920K rodata, 220K init, 241K bss, 56676K reserved, 0K cma-reserved, 2367488K highmem)
> [    0.000000] Virtual kernel memory layout:
> [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
> [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
> [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
> [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
> [    0.000000]       .text : 0xc0008000 - 0xc053e2ac   (5337 kB)
> [    0.000000]       .init : 0xc053f000 - 0xc0576000   ( 220 kB)
> [    0.000000]       .data : 0xc0576000 - 0xc059b240   ( 149 kB)
> [    0.000000]        .bss : 0xc059e000 - 0xc05da504   ( 242 kB)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
> [    0.000000] Preemptible hierarchical RCU implementation.
> [    0.000000]  Additional per-CPU info printed with stalls.
> [    0.000000] NR_IRQS:16 nr_irqs:16 16
> [    0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
> [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
> [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
> [    0.000012] Switching to timer-based delay loop, resolution 20ns
> [    0.000082] clocksource arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 38225208935 ns
> [    0.000100] sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 42949672950ns
> [    0.000892] Console: colour dummy device 80x30
> [    0.000969] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
> [    0.001007] pid_max: default: 32768 minimum: 301
> [    0.001276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [    0.001302] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
> [    0.002711] CPU: Testing write buffer coherency: ok
> [    0.003235] /cpus/cpu at 0 missing clock-frequency property
> [    0.003279] /cpus/cpu at 1 missing clock-frequency property
> [    0.003324] /cpus/cpu at 2 missing clock-frequency property
> [    0.003370] /cpus/cpu at 3 missing clock-frequency property
> [    0.003420] /cpus/cpu at 100 missing clock-frequency property
> [    0.003474] /cpus/cpu at 101 missing clock-frequency property
> [    0.003533] /cpus/cpu at 102 missing clock-frequency property
> [    0.003597] /cpus/cpu at 103 missing clock-frequency property
> [    0.003665] /cpus/cpu at 200 missing clock-frequency property
> [    0.003737] /cpus/cpu at 201 missing clock-frequency property
> [    0.003814] /cpus/cpu at 202 missing clock-frequency property
> [    0.003892] /cpus/cpu at 203 missing clock-frequency property
> [    0.003976] /cpus/cpu at 300 missing clock-frequency property
> [    0.004065] /cpus/cpu at 301 missing clock-frequency property
> [    0.004158] /cpus/cpu at 302 missing clock-frequency property
> [    0.004255] /cpus/cpu at 303 missing clock-frequency property
> [    0.004284] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [    0.004418] Setting up static identity map for 0x10008280 - 0x100082d8
> [    0.004716] HiP04 MCPM initialized
> [    0.270900] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [    0.338352] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> [    0.405920] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> [    0.473505] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
> [    0.541041] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
> [    0.608577] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
> [    0.676148] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
> [    0.743715] CPU8: thread -1, cpu 0, socket 2, mpidr 80000200
> [    0.811255] CPU9: thread -1, cpu 1, socket 2, mpidr 80000201
> [    0.878793] CPU10: thread -1, cpu 2, socket 2, mpidr 80000202
> [    0.946347] CPU11: thread -1, cpu 3, socket 2, mpidr 80000203
> [    1.013975] CPU12: thread -1, cpu 0, socket 3, mpidr 80000300
> [    1.081452] CPU13: thread -1, cpu 1, socket 3, mpidr 80000301
> [    1.149029] CPU14: thread -1, cpu 2, socket 3, mpidr 80000302
> [    1.216575] CPU15: thread -1, cpu 3, socket 3, mpidr 80000303
> [    1.216795] Brought up 16 CPUs
> [    1.216899] SMP: Total of 16 processors activated (1600.00 BogoMIPS).
> [    1.216919] CPU: All CPU(s) started in HYP mode.
> [    1.216937] CPU: Virtualization extensions available.
> [    1.218912] devtmpfs: initialized
> [    1.251514] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
> [    1.252528] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
> [    1.252759] pinctrl core: initialized pinctrl subsystem
> [    1.270099] NET: Registered protocol family 16
> [    1.270878] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [    1.292650] Serial: AMBA PL011 UART driver
> [    1.314826] SCSI subsystem initialized
> [    1.316126] usbcore: registered new interface driver usbfs
> [    1.316282] usbcore: registered new interface driver hub
> [    1.316760] usbcore: registered new device driver usb
> [    1.319857] Switched to clocksource arch_sys_counter
> [    1.344958] NET: Registered protocol family 2
> [    1.346746] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> [    1.346931] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> [    1.347242] TCP: Hash tables configured (established 8192 bind 8192)
> [    1.347441] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [    1.347523] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [    1.348142] NET: Registered protocol family 1
> [    1.348941] RPC: Registered named UNIX socket transport module.
> [    1.348964] RPC: Registered udp transport module.
> [    1.348982] RPC: Registered tcp transport module.
> [    1.349001] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    1.349542] Unpacking initramfs...
> [    4.036110] Freeing initrd memory: 24576K (c0d00000 - c2500000)
> [    4.041270] futex hash table entries: 4096 (order: 6, 262144 bytes)
> [    4.068647] NFS: Registering the id_resolver key type
> [    4.068740] Key type id_resolver registered
> [    4.068764] Key type id_legacy registered
> [    4.069265] bounce: pool size: 64 pages
> [    4.069794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [    4.069833] io scheduler noop registered
> [    4.069864] io scheduler deadline registered
> [    4.070380] io scheduler cfq registered (default)
> [    4.217934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
> [    4.222002] console [ttyS0] disabled
> [    4.222186] e4007000.uart: ttyS0 at MMIO 0xe4007000 (irq = 413, base_baud = 10500000) is a 16550A
> [    6.529131] console [ttyS0] enabled
> [    6.542635] [drm] Initialized drm 1.1.0 20060810
> [    6.560545] ahci ea000000.sata: controller can't do NCQ, turning off CAP_NCQ
> [    6.584199] ahci ea000000.sata: controller can't do FBS, turning off CAP_FBS
> [    6.608078] ahci ea000000.sata: SSS flag set, parallel bus scan disabled
> [    6.630673] ahci ea000000.sata: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl platform mode
> [    6.659316] ahci ea000000.sata: flags: sntf stag pm led clo only pmp slum part ccc sxs boh
> [    6.693851] scsi host0: ahci
> [    6.704676] scsi host1: ahci
> [    6.715455] scsi host2: ahci
> [    6.726248] scsi host3: ahci
> [    6.736636] ata1: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x100 irq 404
> [    6.763580] ata2: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x180 irq 404
> [    6.790470] ata3: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x200 irq 404
> [    6.817320] ata4: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x280 irq 404
> [    8.002404] ata1: SATA link down (SStatus 0 SControl 300)
> [    9.251149] ata2: SATA link down (SStatus 0 SControl 300)
> [   11.174898] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   11.296724] ata3.00: ATA-8: ST500LM021-1KJ152, 0001SDM1, max UDMA/133
> [   11.318388] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [   12.470360] ata3.00: configured for UDMA/133
> [   12.525550] scsi 2:0:0:0: Direct-Access     ATA ST500LM021-1KJ15 SDM1 PQ: 0 ANSI: 5
> [   12.554663] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [   12.579879] sd 2:0:0:0: [sda] 4096-byte physical blocks
> [   12.597919] sd 2:0:0:0: [sda] Write Protect is off
> [   12.614225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [   12.687389]  sda: sda1 sda2
> [   12.699532] sd 2:0:0:0: [sda] Attached SCSI disk
> [   13.739898] ata4: SATA link down (SStatus 0 SControl 300)
> [   18.127498] libphy: hip04_mdio_bus: probed
> [   18.736446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [   18.758364] ehci-platform: EHCI generic platform driver
> [   18.776239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [   18.797023] ohci-platform: OHCI generic platform driver
> [   18.814956] usbcore: registered new interface driver usb-storage
> [   18.835964] mousedev: PS/2 mouse device common for all mice
> [   18.855836] failed to find reboot-offset property
> [   18.871770] hisi-reboot: probe of e3e00000.sysctrl failed with error -22
> [   18.894752] Synopsys Designware Multimedia Card Interface Driver
> [   18.916759] usbcore: registered new interface driver usbhid
> [   18.935450] usbhid: USB HID core driver
> [   18.951098] NET: Registered protocol family 10
> [   18.968938] sit: IPv6 over IPv4 tunneling driver
> [   18.986387] NET: Registered protocol family 17
> [   19.001496] Key type dns_resolver registered
> [   19.016036] Registering SWP/SWPB emulation handler
> [   19.034460] hctosys: unable to open rtc device (rtc0)
> [   19.054127] ttyS0 - failed to request DMA
> [   19.068154] Freeing unused kernel memory: 220K (c053f000 - c0576000)
> mount: mounting /dev/sda1 on /mnt/sda1 failed: No such file or directory
> [RCS]: /etc/init.d/S01udev
> Starting mdev...
> [   19.984050] random: sshd urandom read with 8 bits of entropy available
> /var/empty must be owned by root and not group or world-writable.
>
> Please press Enter to activate this console.
> Welcome to HiLinux.
> / # cat /proc/device-tree/soc/
> cat: read error: Is a directory
> / # cat /proc/device-tree/soc/
> #address-cells                gpio at 4003000/
> #size-cells                   interrupt-controller at c01000/
> arm-pmu/                      interrupt-parent
> compatible                    mdio/
> dual_timer at 3000000/           name
> ethernet at 2800000/             nand at 4020000/
> ethernet at 2880000/             ppe at 28c0000/
> ethernet at 28b0000/             ranges
> fabric/                       sata at a000000/
> gpio at 4000000/                 sysctrl/
> gpio at 4001000/                 uart at 4007000/
> gpio at 4002000/
> / # cat /proc/device-tree/soc/
>
>
>
>>>
>>> Thanks!
>>>
>>> Best Regards,
>>> Wei
>>>
>>>>       Arnd
>>>>
>>>> .
>>>>
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>> Tyler
>>
>> [1] http://kernelci.org/boot/all/job/arm-soc/kernel/v4.1-rc3-170-g28837bc3e732/
>> [2] http://kernelci.org/boot/all/job/next/kernel/next-20150513/
>> [3] https://ci.linaro.org/view/people/job/tbaker-boot-bisect-bot/28/console
>>
>> .
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Cheers,

Tyler

[1] http://lava.kernelci.org/scheduler/job/85333/log_file

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Tyler Baker]

On 14 May 2015 at 06:36, Tyler Baker <tyler.baker@linaro.org> wrote:
> Hi Wei,
>
> On 14 May 2015 at 01:49, Wei Xu <xuwei5@hisilicon.com> wrote:
>>
>>
>> On 5/13/2015 8:20 PM, Tyler Baker wrote:
>>> Hi Wei/Arnd,
>>>
>>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>>>>
>>>>
>>>> On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
>>>>> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>>>>>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>>>>>
>>>>>> - Add hip04 GPIO nodes
>>>>>> - Add NANDC nodes for hip04 and D01 board
>>>>>> - Add hip04 ethernet related nodes
>>>>>>
>>>>>>
>>>>
>>>> Hi Arnd,
>>>>
>>>>> Pulled into next/dt, thanks!
>>>
>>> When this was pulled into arm-soc, the kernelci.org bot reported
>>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
>>> and double check the status of -next in case there were needed
>>> dependencies from other trees. However, now there are the same
>>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
>>> these boot failures down to...
>>>
>>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
>>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
>>> Author: Zhou Wang <wangzhou.bry@gmail.com>
>>> Date:   Wed Mar 25 14:57:45 2015 +0800
>>>
>>>     ARM: dts: hip04: add GPIO pieces
>>>
>>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>>>     GPIOs and can be configured to be an interrupt controller.The GPIO
>>>     controllers are compatible with the snps,dw-apb-gpio driver.
>>>     This patch add the corresponding device tree nodes.
>>>
>>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>>
>> Hi Tyler,
>>
>>> This commit does not revert cleanly from -next, so I reverted all
>>> three commits in this pull request on top of next-20150513 and this
>>> get the hip04-d01 booting again.
>>
>> It is a little strange.
>> I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
>> at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
>> and compiled with "hisi_defconfig".
>>
>> It is booting OK and the log is as below.
>> And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
>> Could you please confirm it again?
>
> It appears we are using different image formats to boot. The link
> above shows .kernel, .monitor, .text...can I split the kernel//dtb out
> from .kernel?
>
> I am using zImage and hip04-d01.dtb directly[1] with UEFI to TFTP
> boot. Could you try this method?

For good measure, I tried booting next-20150514 on the D01 hardware in
the Linaro lab to confirm the same failure I see locally. It fails to
boot as well[1].

>
>> Thanks!
>>
>> Best Regards,
>> Wei
>>
>> / # SC00$
>> DDR INIT OK!!!
>> GPIO INIT OK!!!
>> Boot firmware EVB_SECURE_UEFI_BIOS built at 21:21:53 on May  6 2015
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/HisiPkg/D01BoardPkg/Sec/Sec/Sec/DEBUG/ArmPlatformSec.dll 0xF0100180
>> Trust Zone Configuration is disabled
>> UEFI firmware (version EVB_SECURE_UEFI_BIOS built at 18:53:44 on May  6 2015)
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0xF0120180
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8000
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0x6FA83240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0x6FA9F240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0x6FA7E240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe/DEBUG/EmuVariableRuntimeDxe.dll 0x6FA97240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll 0x6FA93240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0x6AAC9240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0x6AAC3240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0x6FA79240
>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0x6FA61240
>> NandFlashInit start
>> [NANDFlash]  Vendor[0]: MICRON,       MakerCode[0]:    0x0002C
>> [NANDFlash]  ChipSize[0]: 0x20000000, BlockSize[0]:    0x20000
>> [NANDFlash]  PageSize[0]: 0x00000800, PagePerBlock[0]: 0x00040
>> NAND Flash Init OK! Status = Success
>>
>> Auto boot or not ?(Press 's' to Boot Menu)
>> Now wait for 2 seconds...
>>
>> Not Press 's', Start Auto Boot!
>>
>> Transmit  OS from FLASH to DDR now, please wait![CopyNandToMem : 509]
>> [CopyNandToMem : 533]PageNumCopy = 1400!
>>
>> The .kernel file is transmitted ok!
>>
>> Copy Bootwrapper from FLASH to SRAM...[CopyNandToMem : 509]
>> [CopyNandToMem : 533]PageNumCopy = 40!
>>
>> The .text file is transmitted ok!
>> [CopyNandToMem : 509]
>> [CopyNandToMem : 533]PageNumCopy = 40!
>> The .monitor file is transmitted ok!
>> [CopyNandToMem : 509]
>> [CopyNandToMem : 533]PageNumCopy = 3000!
>> THE .FILESYSTEM FILE IS TRANSMITTED OK!
>> MOVE PC TEXT_SRAM_BASE
>> C01$
>> &#C02$
>> &#C03$
>> &#C10$
>> &#C11$
>> &#C12$
>> &#C13$
>> &#C20$
>> &#C21$
>> &#C22$
>> &#C23$
>> &#C30$
>> &#C31$
>> &#C32$
>> &#C33$
>> &#[    0.000000] Booting Linux on physical CPU 0x0
>> [    0.000000] Linux version 4.1.0-rc3-00364-g28837bc (joyx at f00297740a) (gcc version 4.9.1 20140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 2014.05) ) #10 SMP PREEMPT Thu May 14 5
>> [    0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
>> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
>> [    0.000000] Machine model: Hisilicon D01 Development Board
>> [    0.000000] Ignoring memory block 0x4c0000000 - 0x800000000
>> [    0.000000] earlycon: no match for ttyS0,115200
>> [    0.000000] Memory policy: Data cache writealloc
>> [    0.000000] PERCPU: Embedded 9 pages/cpu @edf46000 s15040 r0 d21824 u36864
>> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 784912
>> [    0.000000] Kernel command line: console=ttyS0,115200 initrd=0x10d00000,0x1800000 rdinit=/linuxrc earlyprintk
>> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>> [    0.000000] Memory: 3089052K/3145728K available (4416K kernel code, 148K rwdata, 920K rodata, 220K init, 241K bss, 56676K reserved, 0K cma-reserved, 2367488K highmem)
>> [    0.000000] Virtual kernel memory layout:
>> [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>> [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>> [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
>> [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
>> [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
>> [    0.000000]       .text : 0xc0008000 - 0xc053e2ac   (5337 kB)
>> [    0.000000]       .init : 0xc053f000 - 0xc0576000   ( 220 kB)
>> [    0.000000]       .data : 0xc0576000 - 0xc059b240   ( 149 kB)
>> [    0.000000]        .bss : 0xc059e000 - 0xc05da504   ( 242 kB)
>> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>> [    0.000000] Preemptible hierarchical RCU implementation.
>> [    0.000000]  Additional per-CPU info printed with stalls.
>> [    0.000000] NR_IRQS:16 nr_irqs:16 16
>> [    0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
>> [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
>> [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
>> [    0.000012] Switching to timer-based delay loop, resolution 20ns
>> [    0.000082] clocksource arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 38225208935 ns
>> [    0.000100] sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 42949672950ns
>> [    0.000892] Console: colour dummy device 80x30
>> [    0.000969] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
>> [    0.001007] pid_max: default: 32768 minimum: 301
>> [    0.001276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>> [    0.001302] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>> [    0.002711] CPU: Testing write buffer coherency: ok
>> [    0.003235] /cpus/cpu at 0 missing clock-frequency property
>> [    0.003279] /cpus/cpu at 1 missing clock-frequency property
>> [    0.003324] /cpus/cpu at 2 missing clock-frequency property
>> [    0.003370] /cpus/cpu at 3 missing clock-frequency property
>> [    0.003420] /cpus/cpu at 100 missing clock-frequency property
>> [    0.003474] /cpus/cpu at 101 missing clock-frequency property
>> [    0.003533] /cpus/cpu at 102 missing clock-frequency property
>> [    0.003597] /cpus/cpu at 103 missing clock-frequency property
>> [    0.003665] /cpus/cpu at 200 missing clock-frequency property
>> [    0.003737] /cpus/cpu at 201 missing clock-frequency property
>> [    0.003814] /cpus/cpu at 202 missing clock-frequency property
>> [    0.003892] /cpus/cpu at 203 missing clock-frequency property
>> [    0.003976] /cpus/cpu at 300 missing clock-frequency property
>> [    0.004065] /cpus/cpu at 301 missing clock-frequency property
>> [    0.004158] /cpus/cpu at 302 missing clock-frequency property
>> [    0.004255] /cpus/cpu at 303 missing clock-frequency property
>> [    0.004284] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
>> [    0.004418] Setting up static identity map for 0x10008280 - 0x100082d8
>> [    0.004716] HiP04 MCPM initialized
>> [    0.270900] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>> [    0.338352] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>> [    0.405920] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>> [    0.473505] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
>> [    0.541041] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
>> [    0.608577] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
>> [    0.676148] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
>> [    0.743715] CPU8: thread -1, cpu 0, socket 2, mpidr 80000200
>> [    0.811255] CPU9: thread -1, cpu 1, socket 2, mpidr 80000201
>> [    0.878793] CPU10: thread -1, cpu 2, socket 2, mpidr 80000202
>> [    0.946347] CPU11: thread -1, cpu 3, socket 2, mpidr 80000203
>> [    1.013975] CPU12: thread -1, cpu 0, socket 3, mpidr 80000300
>> [    1.081452] CPU13: thread -1, cpu 1, socket 3, mpidr 80000301
>> [    1.149029] CPU14: thread -1, cpu 2, socket 3, mpidr 80000302
>> [    1.216575] CPU15: thread -1, cpu 3, socket 3, mpidr 80000303
>> [    1.216795] Brought up 16 CPUs
>> [    1.216899] SMP: Total of 16 processors activated (1600.00 BogoMIPS).
>> [    1.216919] CPU: All CPU(s) started in HYP mode.
>> [    1.216937] CPU: Virtualization extensions available.
>> [    1.218912] devtmpfs: initialized
>> [    1.251514] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
>> [    1.252528] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>> [    1.252759] pinctrl core: initialized pinctrl subsystem
>> [    1.270099] NET: Registered protocol family 16
>> [    1.270878] DMA: preallocated 256 KiB pool for atomic coherent allocations
>> [    1.292650] Serial: AMBA PL011 UART driver
>> [    1.314826] SCSI subsystem initialized
>> [    1.316126] usbcore: registered new interface driver usbfs
>> [    1.316282] usbcore: registered new interface driver hub
>> [    1.316760] usbcore: registered new device driver usb
>> [    1.319857] Switched to clocksource arch_sys_counter
>> [    1.344958] NET: Registered protocol family 2
>> [    1.346746] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>> [    1.346931] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>> [    1.347242] TCP: Hash tables configured (established 8192 bind 8192)
>> [    1.347441] UDP hash table entries: 512 (order: 2, 16384 bytes)
>> [    1.347523] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>> [    1.348142] NET: Registered protocol family 1
>> [    1.348941] RPC: Registered named UNIX socket transport module.
>> [    1.348964] RPC: Registered udp transport module.
>> [    1.348982] RPC: Registered tcp transport module.
>> [    1.349001] RPC: Registered tcp NFSv4.1 backchannel transport module.
>> [    1.349542] Unpacking initramfs...
>> [    4.036110] Freeing initrd memory: 24576K (c0d00000 - c2500000)
>> [    4.041270] futex hash table entries: 4096 (order: 6, 262144 bytes)
>> [    4.068647] NFS: Registering the id_resolver key type
>> [    4.068740] Key type id_resolver registered
>> [    4.068764] Key type id_legacy registered
>> [    4.069265] bounce: pool size: 64 pages
>> [    4.069794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>> [    4.069833] io scheduler noop registered
>> [    4.069864] io scheduler deadline registered
>> [    4.070380] io scheduler cfq registered (default)
>> [    4.217934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
>> [    4.222002] console [ttyS0] disabled
>> [    4.222186] e4007000.uart: ttyS0 at MMIO 0xe4007000 (irq = 413, base_baud = 10500000) is a 16550A
>> [    6.529131] console [ttyS0] enabled
>> [    6.542635] [drm] Initialized drm 1.1.0 20060810
>> [    6.560545] ahci ea000000.sata: controller can't do NCQ, turning off CAP_NCQ
>> [    6.584199] ahci ea000000.sata: controller can't do FBS, turning off CAP_FBS
>> [    6.608078] ahci ea000000.sata: SSS flag set, parallel bus scan disabled
>> [    6.630673] ahci ea000000.sata: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl platform mode
>> [    6.659316] ahci ea000000.sata: flags: sntf stag pm led clo only pmp slum part ccc sxs boh
>> [    6.693851] scsi host0: ahci
>> [    6.704676] scsi host1: ahci
>> [    6.715455] scsi host2: ahci
>> [    6.726248] scsi host3: ahci
>> [    6.736636] ata1: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x100 irq 404
>> [    6.763580] ata2: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x180 irq 404
>> [    6.790470] ata3: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x200 irq 404
>> [    6.817320] ata4: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x280 irq 404
>> [    8.002404] ata1: SATA link down (SStatus 0 SControl 300)
>> [    9.251149] ata2: SATA link down (SStatus 0 SControl 300)
>> [   11.174898] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> [   11.296724] ata3.00: ATA-8: ST500LM021-1KJ152, 0001SDM1, max UDMA/133
>> [   11.318388] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [   12.470360] ata3.00: configured for UDMA/133
>> [   12.525550] scsi 2:0:0:0: Direct-Access     ATA ST500LM021-1KJ15 SDM1 PQ: 0 ANSI: 5
>> [   12.554663] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>> [   12.579879] sd 2:0:0:0: [sda] 4096-byte physical blocks
>> [   12.597919] sd 2:0:0:0: [sda] Write Protect is off
>> [   12.614225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [   12.687389]  sda: sda1 sda2
>> [   12.699532] sd 2:0:0:0: [sda] Attached SCSI disk
>> [   13.739898] ata4: SATA link down (SStatus 0 SControl 300)
>> [   18.127498] libphy: hip04_mdio_bus: probed
>> [   18.736446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [   18.758364] ehci-platform: EHCI generic platform driver
>> [   18.776239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [   18.797023] ohci-platform: OHCI generic platform driver
>> [   18.814956] usbcore: registered new interface driver usb-storage
>> [   18.835964] mousedev: PS/2 mouse device common for all mice
>> [   18.855836] failed to find reboot-offset property
>> [   18.871770] hisi-reboot: probe of e3e00000.sysctrl failed with error -22
>> [   18.894752] Synopsys Designware Multimedia Card Interface Driver
>> [   18.916759] usbcore: registered new interface driver usbhid
>> [   18.935450] usbhid: USB HID core driver
>> [   18.951098] NET: Registered protocol family 10
>> [   18.968938] sit: IPv6 over IPv4 tunneling driver
>> [   18.986387] NET: Registered protocol family 17
>> [   19.001496] Key type dns_resolver registered
>> [   19.016036] Registering SWP/SWPB emulation handler
>> [   19.034460] hctosys: unable to open rtc device (rtc0)
>> [   19.054127] ttyS0 - failed to request DMA
>> [   19.068154] Freeing unused kernel memory: 220K (c053f000 - c0576000)
>> mount: mounting /dev/sda1 on /mnt/sda1 failed: No such file or directory
>> [RCS]: /etc/init.d/S01udev
>> Starting mdev...
>> [   19.984050] random: sshd urandom read with 8 bits of entropy available
>> /var/empty must be owned by root and not group or world-writable.
>>
>> Please press Enter to activate this console.
>> Welcome to HiLinux.
>> / # cat /proc/device-tree/soc/
>> cat: read error: Is a directory
>> / # cat /proc/device-tree/soc/
>> #address-cells                gpio at 4003000/
>> #size-cells                   interrupt-controller at c01000/
>> arm-pmu/                      interrupt-parent
>> compatible                    mdio/
>> dual_timer at 3000000/           name
>> ethernet at 2800000/             nand at 4020000/
>> ethernet at 2880000/             ppe at 28c0000/
>> ethernet at 28b0000/             ranges
>> fabric/                       sata at a000000/
>> gpio at 4000000/                 sysctrl/
>> gpio at 4001000/                 uart at 4007000/
>> gpio at 4002000/
>> / # cat /proc/device-tree/soc/
>>
>>
>>
>>>>
>>>> Thanks!
>>>>
>>>> Best Regards,
>>>> Wei
>>>>
>>>>>       Arnd
>>>>>
>>>>> .
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>> Tyler
>>>
>>> [1] http://kernelci.org/boot/all/job/arm-soc/kernel/v4.1-rc3-170-g28837bc3e732/
>>> [2] http://kernelci.org/boot/all/job/next/kernel/next-20150513/
>>> [3] https://ci.linaro.org/view/people/job/tbaker-boot-bisect-bot/28/console
>>>
>>> .
>>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> Cheers,
>
> Tyler
>
> [1] http://lava.kernelci.org/scheduler/job/85333/log_file

Cheers,

Tyler

[1] https://validation.linaro.org/scheduler/job/350310/log_file

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Wei Xu]

On 5/14/2015 2:55 PM, Tyler Baker wrote:
> On 14 May 2015 at 06:36, Tyler Baker <tyler.baker@linaro.org> wrote:
>> Hi Wei,
>>
>> On 14 May 2015 at 01:49, Wei Xu <xuwei5@hisilicon.com> wrote:
>>>
>>>
>>> On 5/13/2015 8:20 PM, Tyler Baker wrote:
>>>> Hi Wei/Arnd,
>>>>
>>>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>>>>>
>>>>>
>>>>> On 5/12/2015 4:06 PM, Arnd Bergmann wrote:
>>>>>> On Friday 08 May 2015 15:26:09 Wei Xu wrote:
>>>>>>> ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2
>>>>>>>
>>>>>>> - Add hip04 GPIO nodes
>>>>>>> - Add NANDC nodes for hip04 and D01 board
>>>>>>> - Add hip04 ethernet related nodes
>>>>>>>
>>>>>>>
>>>>>
>>>>> Hi Arnd,
>>>>>
>>>>>> Pulled into next/dt, thanks!
>>>>
>>>> When this was pulled into arm-soc, the kernelci.org bot reported
>>>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
>>>> and double check the status of -next in case there were needed
>>>> dependencies from other trees. However, now there are the same
>>>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
>>>> these boot failures down to...
>>>>
>>>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
>>>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
>>>> Author: Zhou Wang <wangzhou.bry@gmail.com>
>>>> Date:   Wed Mar 25 14:57:45 2015 +0800
>>>>
>>>>     ARM: dts: hip04: add GPIO pieces
>>>>
>>>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>>>>     GPIOs and can be configured to be an interrupt controller.The GPIO
>>>>     controllers are compatible with the snps,dw-apb-gpio driver.
>>>>     This patch add the corresponding device tree nodes.
>>>>
>>>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>>>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>>>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>>>
>>> Hi Tyler,
>>>
>>>> This commit does not revert cleanly from -next, so I reverted all
>>>> three commits in this pull request on top of next-20150513 and this
>>>> get the hip04-d01 booting again.
>>>
>>> It is a little strange.
>>> I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
>>> at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
>>> and compiled with "hisi_defconfig".
>>>
>>> It is booting OK and the log is as below.
>>> And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
>>> Could you please confirm it again?
>>
>> It appears we are using different image formats to boot. The link
>> above shows .kernel, .monitor, .text...can I split the kernel//dtb out
>> from .kernel?
>>
>> I am using zImage and hip04-d01.dtb directly[1] with UEFI to TFTP
>> boot. Could you try this method?

Hi Tyler,

> For good measure, I tried booting next-20150514 on the D01 hardware in
> the Linaro lab to confirm the same failure I see locally. It fails to
> boot as well[1].

Thanks!
I have tried your binary files and found it is stuck in the UEFI.
I will continue to investigate this issue.

Hi Arnd,

Could you please revert that branch?
After I resolve this issue I will send another pull request.
Sorry to bother you!
Thanks!

Best Regards,
Wei

>>
>>> Thanks!
>>>
>>> Best Regards,
>>> Wei
>>>
>>> / # SC00$
>>> DDR INIT OK!!!
>>> GPIO INIT OK!!!
>>> Boot firmware EVB_SECURE_UEFI_BIOS built at 21:21:53 on May  6 2015
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/HisiPkg/D01BoardPkg/Sec/Sec/Sec/DEBUG/ArmPlatformSec.dll 0xF0100180
>>> Trust Zone Configuration is disabled
>>> UEFI firmware (version EVB_SECURE_UEFI_BIOS built at 18:53:44 on May  6 2015)
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0xF0120180
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x6FAD8000
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0x6FA83240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0x6FA9F240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0x6FA7E240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe/DEBUG/EmuVariableRuntimeDxe.dll 0x6FA97240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll 0x6FA93240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0x6AAC9240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0x6AAC3240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0x6FA79240
>>> add-symbol-file /home/joyx/develop/github-uefi/Build/D01/DEBUG_GCC49/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0x6FA61240
>>> NandFlashInit start
>>> [NANDFlash]  Vendor[0]: MICRON,       MakerCode[0]:    0x0002C
>>> [NANDFlash]  ChipSize[0]: 0x20000000, BlockSize[0]:    0x20000
>>> [NANDFlash]  PageSize[0]: 0x00000800, PagePerBlock[0]: 0x00040
>>> NAND Flash Init OK! Status = Success
>>>
>>> Auto boot or not ?(Press 's' to Boot Menu)
>>> Now wait for 2 seconds...
>>>
>>> Not Press 's', Start Auto Boot!
>>>
>>> Transmit  OS from FLASH to DDR now, please wait![CopyNandToMem : 509]
>>> [CopyNandToMem : 533]PageNumCopy = 1400!
>>>
>>> The .kernel file is transmitted ok!
>>>
>>> Copy Bootwrapper from FLASH to SRAM...[CopyNandToMem : 509]
>>> [CopyNandToMem : 533]PageNumCopy = 40!
>>>
>>> The .text file is transmitted ok!
>>> [CopyNandToMem : 509]
>>> [CopyNandToMem : 533]PageNumCopy = 40!
>>> The .monitor file is transmitted ok!
>>> [CopyNandToMem : 509]
>>> [CopyNandToMem : 533]PageNumCopy = 3000!
>>> THE .FILESYSTEM FILE IS TRANSMITTED OK!
>>> MOVE PC TEXT_SRAM_BASE
>>> C01$
>>> &#C02$
>>> &#C03$
>>> &#C10$
>>> &#C11$
>>> &#C12$
>>> &#C13$
>>> &#C20$
>>> &#C21$
>>> &#C22$
>>> &#C23$
>>> &#C30$
>>> &#C31$
>>> &#C32$
>>> &#C33$
>>> &#[    0.000000] Booting Linux on physical CPU 0x0
>>> [    0.000000] Linux version 4.1.0-rc3-00364-g28837bc (joyx at f00297740a) (gcc version 4.9.1 20140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 2014.05) ) #10 SMP PREEMPT Thu May 14 5
>>> [    0.000000] CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5387d
>>> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
>>> [    0.000000] Machine model: Hisilicon D01 Development Board
>>> [    0.000000] Ignoring memory block 0x4c0000000 - 0x800000000
>>> [    0.000000] earlycon: no match for ttyS0,115200
>>> [    0.000000] Memory policy: Data cache writealloc
>>> [    0.000000] PERCPU: Embedded 9 pages/cpu @edf46000 s15040 r0 d21824 u36864
>>> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 784912
>>> [    0.000000] Kernel command line: console=ttyS0,115200 initrd=0x10d00000,0x1800000 rdinit=/linuxrc earlyprintk
>>> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>>> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>>> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>>> [    0.000000] Memory: 3089052K/3145728K available (4416K kernel code, 148K rwdata, 920K rodata, 220K init, 241K bss, 56676K reserved, 0K cma-reserved, 2367488K highmem)
>>> [    0.000000] Virtual kernel memory layout:
>>> [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>>> [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>>> [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
>>> [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
>>> [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
>>> [    0.000000]       .text : 0xc0008000 - 0xc053e2ac   (5337 kB)
>>> [    0.000000]       .init : 0xc053f000 - 0xc0576000   ( 220 kB)
>>> [    0.000000]       .data : 0xc0576000 - 0xc059b240   ( 149 kB)
>>> [    0.000000]        .bss : 0xc059e000 - 0xc05da504   ( 242 kB)
>>> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
>>> [    0.000000] Preemptible hierarchical RCU implementation.
>>> [    0.000000]  Additional per-CPU info printed with stalls.
>>> [    0.000000] NR_IRQS:16 nr_irqs:16 16
>>> [    0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
>>> [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
>>> [    0.000003] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
>>> [    0.000012] Switching to timer-based delay loop, resolution 20ns
>>> [    0.000082] clocksource arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 38225208935 ns
>>> [    0.000100] sched_clock: 32 bits at 50MHz, resolution 20ns, wraps every 42949672950ns
>>> [    0.000892] Console: colour dummy device 80x30
>>> [    0.000969] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
>>> [    0.001007] pid_max: default: 32768 minimum: 301
>>> [    0.001276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
>>> [    0.001302] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
>>> [    0.002711] CPU: Testing write buffer coherency: ok
>>> [    0.003235] /cpus/cpu at 0 missing clock-frequency property
>>> [    0.003279] /cpus/cpu at 1 missing clock-frequency property
>>> [    0.003324] /cpus/cpu at 2 missing clock-frequency property
>>> [    0.003370] /cpus/cpu at 3 missing clock-frequency property
>>> [    0.003420] /cpus/cpu at 100 missing clock-frequency property
>>> [    0.003474] /cpus/cpu at 101 missing clock-frequency property
>>> [    0.003533] /cpus/cpu at 102 missing clock-frequency property
>>> [    0.003597] /cpus/cpu at 103 missing clock-frequency property
>>> [    0.003665] /cpus/cpu at 200 missing clock-frequency property
>>> [    0.003737] /cpus/cpu at 201 missing clock-frequency property
>>> [    0.003814] /cpus/cpu at 202 missing clock-frequency property
>>> [    0.003892] /cpus/cpu at 203 missing clock-frequency property
>>> [    0.003976] /cpus/cpu at 300 missing clock-frequency property
>>> [    0.004065] /cpus/cpu at 301 missing clock-frequency property
>>> [    0.004158] /cpus/cpu at 302 missing clock-frequency property
>>> [    0.004255] /cpus/cpu at 303 missing clock-frequency property
>>> [    0.004284] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
>>> [    0.004418] Setting up static identity map for 0x10008280 - 0x100082d8
>>> [    0.004716] HiP04 MCPM initialized
>>> [    0.270900] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>>> [    0.338352] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>>> [    0.405920] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>>> [    0.473505] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
>>> [    0.541041] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
>>> [    0.608577] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
>>> [    0.676148] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
>>> [    0.743715] CPU8: thread -1, cpu 0, socket 2, mpidr 80000200
>>> [    0.811255] CPU9: thread -1, cpu 1, socket 2, mpidr 80000201
>>> [    0.878793] CPU10: thread -1, cpu 2, socket 2, mpidr 80000202
>>> [    0.946347] CPU11: thread -1, cpu 3, socket 2, mpidr 80000203
>>> [    1.013975] CPU12: thread -1, cpu 0, socket 3, mpidr 80000300
>>> [    1.081452] CPU13: thread -1, cpu 1, socket 3, mpidr 80000301
>>> [    1.149029] CPU14: thread -1, cpu 2, socket 3, mpidr 80000302
>>> [    1.216575] CPU15: thread -1, cpu 3, socket 3, mpidr 80000303
>>> [    1.216795] Brought up 16 CPUs
>>> [    1.216899] SMP: Total of 16 processors activated (1600.00 BogoMIPS).
>>> [    1.216919] CPU: All CPU(s) started in HYP mode.
>>> [    1.216937] CPU: Virtualization extensions available.
>>> [    1.218912] devtmpfs: initialized
>>> [    1.251514] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
>>> [    1.252528] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>>> [    1.252759] pinctrl core: initialized pinctrl subsystem
>>> [    1.270099] NET: Registered protocol family 16
>>> [    1.270878] DMA: preallocated 256 KiB pool for atomic coherent allocations
>>> [    1.292650] Serial: AMBA PL011 UART driver
>>> [    1.314826] SCSI subsystem initialized
>>> [    1.316126] usbcore: registered new interface driver usbfs
>>> [    1.316282] usbcore: registered new interface driver hub
>>> [    1.316760] usbcore: registered new device driver usb
>>> [    1.319857] Switched to clocksource arch_sys_counter
>>> [    1.344958] NET: Registered protocol family 2
>>> [    1.346746] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>>> [    1.346931] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>>> [    1.347242] TCP: Hash tables configured (established 8192 bind 8192)
>>> [    1.347441] UDP hash table entries: 512 (order: 2, 16384 bytes)
>>> [    1.347523] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>>> [    1.348142] NET: Registered protocol family 1
>>> [    1.348941] RPC: Registered named UNIX socket transport module.
>>> [    1.348964] RPC: Registered udp transport module.
>>> [    1.348982] RPC: Registered tcp transport module.
>>> [    1.349001] RPC: Registered tcp NFSv4.1 backchannel transport module.
>>> [    1.349542] Unpacking initramfs...
>>> [    4.036110] Freeing initrd memory: 24576K (c0d00000 - c2500000)
>>> [    4.041270] futex hash table entries: 4096 (order: 6, 262144 bytes)
>>> [    4.068647] NFS: Registering the id_resolver key type
>>> [    4.068740] Key type id_resolver registered
>>> [    4.068764] Key type id_legacy registered
>>> [    4.069265] bounce: pool size: 64 pages
>>> [    4.069794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>>> [    4.069833] io scheduler noop registered
>>> [    4.069864] io scheduler deadline registered
>>> [    4.070380] io scheduler cfq registered (default)
>>> [    4.217934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
>>> [    4.222002] console [ttyS0] disabled
>>> [    4.222186] e4007000.uart: ttyS0 at MMIO 0xe4007000 (irq = 413, base_baud = 10500000) is a 16550A
>>> [    6.529131] console [ttyS0] enabled
>>> [    6.542635] [drm] Initialized drm 1.1.0 20060810
>>> [    6.560545] ahci ea000000.sata: controller can't do NCQ, turning off CAP_NCQ
>>> [    6.584199] ahci ea000000.sata: controller can't do FBS, turning off CAP_FBS
>>> [    6.608078] ahci ea000000.sata: SSS flag set, parallel bus scan disabled
>>> [    6.630673] ahci ea000000.sata: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl platform mode
>>> [    6.659316] ahci ea000000.sata: flags: sntf stag pm led clo only pmp slum part ccc sxs boh
>>> [    6.693851] scsi host0: ahci
>>> [    6.704676] scsi host1: ahci
>>> [    6.715455] scsi host2: ahci
>>> [    6.726248] scsi host3: ahci
>>> [    6.736636] ata1: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x100 irq 404
>>> [    6.763580] ata2: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x180 irq 404
>>> [    6.790470] ata3: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x200 irq 404
>>> [    6.817320] ata4: SATA max UDMA/133 mmio [mem 0xea000000-0xeaffffff] port 0x280 irq 404
>>> [    8.002404] ata1: SATA link down (SStatus 0 SControl 300)
>>> [    9.251149] ata2: SATA link down (SStatus 0 SControl 300)
>>> [   11.174898] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> [   11.296724] ata3.00: ATA-8: ST500LM021-1KJ152, 0001SDM1, max UDMA/133
>>> [   11.318388] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>>> [   12.470360] ata3.00: configured for UDMA/133
>>> [   12.525550] scsi 2:0:0:0: Direct-Access     ATA ST500LM021-1KJ15 SDM1 PQ: 0 ANSI: 5
>>> [   12.554663] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>>> [   12.579879] sd 2:0:0:0: [sda] 4096-byte physical blocks
>>> [   12.597919] sd 2:0:0:0: [sda] Write Protect is off
>>> [   12.614225] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>>> [   12.687389]  sda: sda1 sda2
>>> [   12.699532] sd 2:0:0:0: [sda] Attached SCSI disk
>>> [   13.739898] ata4: SATA link down (SStatus 0 SControl 300)
>>> [   18.127498] libphy: hip04_mdio_bus: probed
>>> [   18.736446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>>> [   18.758364] ehci-platform: EHCI generic platform driver
>>> [   18.776239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>>> [   18.797023] ohci-platform: OHCI generic platform driver
>>> [   18.814956] usbcore: registered new interface driver usb-storage
>>> [   18.835964] mousedev: PS/2 mouse device common for all mice
>>> [   18.855836] failed to find reboot-offset property
>>> [   18.871770] hisi-reboot: probe of e3e00000.sysctrl failed with error -22
>>> [   18.894752] Synopsys Designware Multimedia Card Interface Driver
>>> [   18.916759] usbcore: registered new interface driver usbhid
>>> [   18.935450] usbhid: USB HID core driver
>>> [   18.951098] NET: Registered protocol family 10
>>> [   18.968938] sit: IPv6 over IPv4 tunneling driver
>>> [   18.986387] NET: Registered protocol family 17
>>> [   19.001496] Key type dns_resolver registered
>>> [   19.016036] Registering SWP/SWPB emulation handler
>>> [   19.034460] hctosys: unable to open rtc device (rtc0)
>>> [   19.054127] ttyS0 - failed to request DMA
>>> [   19.068154] Freeing unused kernel memory: 220K (c053f000 - c0576000)
>>> mount: mounting /dev/sda1 on /mnt/sda1 failed: No such file or directory
>>> [RCS]: /etc/init.d/S01udev
>>> Starting mdev...
>>> [   19.984050] random: sshd urandom read with 8 bits of entropy available
>>> /var/empty must be owned by root and not group or world-writable.
>>>
>>> Please press Enter to activate this console.
>>> Welcome to HiLinux.
>>> / # cat /proc/device-tree/soc/
>>> cat: read error: Is a directory
>>> / # cat /proc/device-tree/soc/
>>> #address-cells                gpio at 4003000/
>>> #size-cells                   interrupt-controller at c01000/
>>> arm-pmu/                      interrupt-parent
>>> compatible                    mdio/
>>> dual_timer at 3000000/           name
>>> ethernet at 2800000/             nand at 4020000/
>>> ethernet at 2880000/             ppe at 28c0000/
>>> ethernet at 28b0000/             ranges
>>> fabric/                       sata at a000000/
>>> gpio at 4000000/                 sysctrl/
>>> gpio at 4001000/                 uart at 4007000/
>>> gpio at 4002000/
>>> / # cat /proc/device-tree/soc/
>>>
>>>
>>>
>>>>>
>>>>> Thanks!
>>>>>
>>>>> Best Regards,
>>>>> Wei
>>>>>
>>>>>>       Arnd
>>>>>>
>>>>>> .
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> linux-arm-kernel mailing list
>>>>> linux-arm-kernel at lists.infradead.org
>>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>>
>>>> Tyler
>>>>
>>>> [1] http://kernelci.org/boot/all/job/arm-soc/kernel/v4.1-rc3-170-g28837bc3e732/
>>>> [2] http://kernelci.org/boot/all/job/next/kernel/next-20150513/
>>>> [3] https://ci.linaro.org/view/people/job/tbaker-boot-bisect-bot/28/console
>>>>
>>>> .
>>>>
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>> Cheers,
>>
>> Tyler
>>
>> [1] http://lava.kernelci.org/scheduler/job/85333/log_file
> 
> Cheers,
> 
> Tyler
> 
> [1] https://validation.linaro.org/scheduler/job/350310/log_file
> 
> .
> 

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Arnd Bergmann]

On Thursday 14 May 2015 18:49:41 Wei Xu wrote:
> On 5/14/2015 2:55 PM, Tyler Baker wrote:
> > On 14 May 2015 at 06:36, Tyler Baker <tyler.baker@linaro.org> wrote:
> >> On 14 May 2015 at 01:49, Wei Xu <xuwei5@hisilicon.com> wrote:
> >>> On 5/13/2015 8:20 PM, Tyler Baker wrote:
> >>>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
> >>>> When this was pulled into arm-soc, the kernelci.org bot reported
> >>>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
> >>>> and double check the status of -next in case there were needed
> >>>> dependencies from other trees. However, now there are the same
> >>>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
> >>>> these boot failures down to...
> >>>>
> >>>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
> >>>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
> >>>> Author: Zhou Wang <wangzhou.bry@gmail.com>
> >>>> Date:   Wed Mar 25 14:57:45 2015 +0800
> >>>>
> >>>>     ARM: dts: hip04: add GPIO pieces
> >>>>
> >>>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
> >>>>     GPIOs and can be configured to be an interrupt controller.The GPIO
> >>>>     controllers are compatible with the snps,dw-apb-gpio driver.
> >>>>     This patch add the corresponding device tree nodes.
> >>>>
> >>>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
> >>>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
> >>>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
> >>>
> >>>
> >>> It is a little strange.
> >>> I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
> >>> at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
> >>> and compiled with "hisi_defconfig".
> >>>
> >>> It is booting OK and the log is as below.
> >>> And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
> >>> Could you please confirm it again?
> >>
> >> It appears we are using different image formats to boot. The link
> >> above shows .kernel, .monitor, .text...can I split the kernel//dtb out
> >> from .kernel?
> >>
> >> I am using zImage and hip04-d01.dtb directly[1] with UEFI to TFTP
> >> boot. Could you try this method?
> 
> > For good measure, I tried booting next-20150514 on the D01 hardware in
> > the Linaro lab to confirm the same failure I see locally. It fails to
> > boot as well[1].
> 
> Thanks!
> I have tried your binary files and found it is stuck in the UEFI.
> I will continue to investigate this issue.
> 
> Hi Arnd,
> 
> Could you please revert that branch?
> After I resolve this issue I will send another pull request.
> Sorry to bother you!
> Thanks!
> 

I have applied the patch below on the for-next branch now, to revert everything
from this pull request. I have not changed the contents of the next/dt branch
for now, and am still waiting for a bug fix. Once you know what caused the
problem, please send a fix that applies on top of the next/dt branch in arm-soc,
and I'll reactivate it.

	Arnd


>From 912c904574a460009901dddf9666c66c4832fa9b Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 15 May 2015 11:24:22 +0200
Subject: [PATCH] ARM: hisi: revert changes from hisi/hip04-dt branch

This temporarily backs out all changes that were added in the hip04-dt
branch. Let's see if we can find out what caused the boot break and
then fix that.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index ba04dd5fba8b..40a9e33c2654 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -28,32 +28,5 @@
 		uart0: uart at 4007000 {
 			status = "ok";
 		};
-
-		nand: nand at 4020000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <16>;
-			nand-ecc-step-size = <1024>;
-
-			partition at 0 {
-				label = "nand_text";
-				reg = <0x00000000 0x00400000>;
-			};
-
-			partition at 00400000 {
-				label = "nand_monitor";
-				reg = <0x00400000 0x00400000>;
-			};
-
-			partition at 00800000 {
-				label = "nand_kernel";
-				reg = <0x00800000 0x00800000>;
-			};
-
-			partition at 01000000 {
-				label = "nand_fs";
-				reg = <0x01000000 0x1f000000>;
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 6434b7f91329..44044f275115 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -269,139 +269,6 @@
 			interrupts = <0 372 4>;
 		};
 
-		gpio at 4003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0x4003000 0x1000>;
-
-			gpio3: gpio-controller at 0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
-				reg = <0>;
-				interrupt-parent = <&gic>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 392 4>;
-			};
-		};
-
-		gpio at 4002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0x4002000 0x1000>;
-
-			gpio2: gpio-controller at 0 {
-			compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
-				reg = <0>;
-				interrupt-parent = <&gic>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 391 4>;
-			};
-		};
-
-		gpio at 4001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0x4001000 0x1000>;
-
-			gpio1: gpio-controller at 0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
-				reg = <0>;
-				interrupt-parent = <&gic>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 390 4>;
-			};
-		};
-
-		gpio at 4000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0x4000000 0x1000>;
-
-			gpio0: gpio-controller at 0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
-				reg = <0>;
-				interrupt-parent = <&gic>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 389 4>;
-			};
-		};
-
-		nand: nand at 4020000 {
-			compatible = "hisilicon,504-nfc";
-			reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
-			interrupts = <0 379 4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		mdio {
-			compatible = "hisilicon,hip04-mdio";
-			reg = <0x28f1000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy0: ethernet-phy at 0 {
-				compatible = "ethernet-phy-ieee802.3-c22";
-				reg = <0>;
-				marvell,reg-init = <18 0x14 0 0x8001>;
-			};
-
-			phy1: ethernet-phy at 1 {
-				compatible = "ethernet-phy-ieee802.3-c22";
-				reg = <1>;
-				marvell,reg-init = <18 0x14 0 0x8001>;
-			};
-		};
-
-		ppe: ppe at 28c0000 {
-			compatible = "hisilicon,hip04-ppe", "syscon";
-			reg = <0x28c0000 0x10000>;
-		};
-
-		fe: ethernet at 28b0000 {
-			compatible = "hisilicon,hip04-mac";
-			reg = <0x28b0000 0x10000>;
-			interrupts = <0 413 4>;
-			phy-mode = "mii";
-			port-handle = <&ppe 31 0>;
-		};
-
-		ge0: ethernet at 2800000 {
-			compatible = "hisilicon,hip04-mac";
-			reg = <0x2800000 0x10000>;
-			interrupts = <0 402 4>;
-			phy-mode = "sgmii";
-			port-handle = <&ppe 0 1>;
-			phy-handle = <&phy0>;
-		};
-
-		ge8: ethernet at 2880000 {
-			compatible = "hisilicon,hip04-mac";
-			reg = <0x2880000 0x10000>;
-			interrupts = <0 410 4>;
-			phy-mode = "sgmii";
-			port-handle = <&ppe 8 2>;
-			phy-handle = <&phy1>;
-		};
 	};
 
 	etb at 0,e3c42000 {

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Kevin Hilman]

On Fri, May 15, 2015 at 2:28 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 14 May 2015 18:49:41 Wei Xu wrote:
>> On 5/14/2015 2:55 PM, Tyler Baker wrote:
>> > On 14 May 2015 at 06:36, Tyler Baker <tyler.baker@linaro.org> wrote:
>> >> On 14 May 2015 at 01:49, Wei Xu <xuwei5@hisilicon.com> wrote:
>> >>> On 5/13/2015 8:20 PM, Tyler Baker wrote:
>> >>>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>> >>>> When this was pulled into arm-soc, the kernelci.org bot reported
>> >>>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
>> >>>> and double check the status of -next in case there were needed
>> >>>> dependencies from other trees. However, now there are the same
>> >>>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
>> >>>> these boot failures down to...
>> >>>>
>> >>>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
>> >>>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
>> >>>> Author: Zhou Wang <wangzhou.bry@gmail.com>
>> >>>> Date:   Wed Mar 25 14:57:45 2015 +0800
>> >>>>
>> >>>>     ARM: dts: hip04: add GPIO pieces
>> >>>>
>> >>>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>> >>>>     GPIOs and can be configured to be an interrupt controller.The GPIO
>> >>>>     controllers are compatible with the snps,dw-apb-gpio driver.
>> >>>>     This patch add the corresponding device tree nodes.
>> >>>>
>> >>>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>> >>>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>> >>>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>> >>>
>> >>>
>> >>> It is a little strange.
>> >>> I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
>> >>> at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
>> >>> and compiled with "hisi_defconfig".
>> >>>
>> >>> It is booting OK and the log is as below.
>> >>> And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
>> >>> Could you please confirm it again?
>> >>
>> >> It appears we are using different image formats to boot. The link
>> >> above shows .kernel, .monitor, .text...can I split the kernel//dtb out
>> >> from .kernel?
>> >>
>> >> I am using zImage and hip04-d01.dtb directly[1] with UEFI to TFTP
>> >> boot. Could you try this method?
>>
>> > For good measure, I tried booting next-20150514 on the D01 hardware in
>> > the Linaro lab to confirm the same failure I see locally. It fails to
>> > boot as well[1].
>>
>> Thanks!
>> I have tried your binary files and found it is stuck in the UEFI.
>> I will continue to investigate this issue.
>>
>> Hi Arnd,
>>
>> Could you please revert that branch?
>> After I resolve this issue I will send another pull request.
>> Sorry to bother you!
>> Thanks!
>>
>
> I have applied the patch below on the for-next branch now, to revert everything
> from this pull request. I have not changed the contents of the next/dt branch
> for now, and am still waiting for a bug fix. Once you know what caused the
> problem, please send a fix that applies on top of the next/dt branch in arm-soc,
> and I'll reactivate it.

FYI... I'm not aware of any fixes  for this, so I'll be removing this
branch from the next/dt branch of arm-soc before sending to Linus.

Kevin

[GIT PULL]Hisilicon hip04 soc and D01 board DT updates for v4.2

[Wei Xu]

On 6/25/2015 1:24 AM, Kevin Hilman wrote:
> On Fri, May 15, 2015 at 2:28 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>> On Thursday 14 May 2015 18:49:41 Wei Xu wrote:
>>> On 5/14/2015 2:55 PM, Tyler Baker wrote:
>>>> On 14 May 2015 at 06:36, Tyler Baker <tyler.baker@linaro.org> wrote:
>>>>> On 14 May 2015 at 01:49, Wei Xu <xuwei5@hisilicon.com> wrote:
>>>>>> On 5/13/2015 8:20 PM, Tyler Baker wrote:
>>>>>>> On 12 May 2015 at 08:09, Wei Xu <xuwei5@hisilicon.com> wrote:
>>>>>>> When this was pulled into arm-soc, the kernelci.org bot reported
>>>>>>> hip04-d01 boot failures[1]. Before bisecting, I decided to wait a day
>>>>>>> and double check the status of -next in case there were needed
>>>>>>> dependencies from other trees. However, now there are the same
>>>>>>> hip04-d01 boot failures in next-20150513[2]. My robot has bisected[3]
>>>>>>> these boot failures down to...
>>>>>>>
>>>>>>> 828fcfe3c84ade68ecc3f1ba78baebc1654977f3 is the first bad commit
>>>>>>> commit 828fcfe3c84ade68ecc3f1ba78baebc1654977f3
>>>>>>> Author: Zhou Wang <wangzhou.bry@gmail.com>
>>>>>>> Date:   Wed Mar 25 14:57:45 2015 +0800
>>>>>>>
>>>>>>>     ARM: dts: hip04: add GPIO pieces
>>>>>>>
>>>>>>>     Hisilicon Soc hip04 has four GPIO controllers, each one has 32
>>>>>>>     GPIOs and can be configured to be an interrupt controller.The GPIO
>>>>>>>     controllers are compatible with the snps,dw-apb-gpio driver.
>>>>>>>     This patch add the corresponding device tree nodes.
>>>>>>>
>>>>>>>     Acked-by: Linus Walleij <linus.walleij@linaro.org>
>>>>>>>     Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
>>>>>>>     Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>>>>>>
>>>>>>
>>>>>> It is a little strange.
>>>>>> I checked to this commit "28837bc3e732610ebc7c88ce205dbe43245b1cb8"
>>>>>> at "git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git".
>>>>>> and compiled with "hisi_defconfig".
>>>>>>
>>>>>> It is booting OK and the log is as below.
>>>>>> And I have also uploaded the binary at "https://github.com/hisilicon/boards/tree/master/D01/for-tyler".
>>>>>> Could you please confirm it again?
>>>>>
>>>>> It appears we are using different image formats to boot. The link
>>>>> above shows .kernel, .monitor, .text...can I split the kernel//dtb out
>>>>> from .kernel?
>>>>>
>>>>> I am using zImage and hip04-d01.dtb directly[1] with UEFI to TFTP
>>>>> boot. Could you try this method?
>>>
>>>> For good measure, I tried booting next-20150514 on the D01 hardware in
>>>> the Linaro lab to confirm the same failure I see locally. It fails to
>>>> boot as well[1].
>>>
>>> Thanks!
>>> I have tried your binary files and found it is stuck in the UEFI.
>>> I will continue to investigate this issue.
>>>
>>> Hi Arnd,
>>>
>>> Could you please revert that branch?
>>> After I resolve this issue I will send another pull request.
>>> Sorry to bother you!
>>> Thanks!
>>>
>>
>> I have applied the patch below on the for-next branch now, to revert everything
>> from this pull request. I have not changed the contents of the next/dt branch
>> for now, and am still waiting for a bug fix. Once you know what caused the
>> problem, please send a fix that applies on top of the next/dt branch in arm-soc,
>> and I'll reactivate it.

Hi Kevin,

> 
> FYI... I'm not aware of any fixes  for this, so I'll be removing this
> branch from the next/dt branch of arm-soc before sending to Linus.
>

OK.
We are still investigating this issue.
Once we resolved it, I will send out a new patch.
Thanks!

Best Regards,
Wei


> Kevin
> 
> .
>