[PATCH 1/3] phy-sun4i-usb: Add a sunxi specific function for setting squelch-detect

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 08-05-15 18:06, Felipe Balbi wrote:
> Hi,
>
> On Sun, Mar 29, 2015 at 12:50:46PM +0200, Hans de Goede wrote:
>> The sunxi otg phy has a bug where it wrongly detects a high speed squelch
>> when reset on the root port gets de-asserted with a lo-speed device.
>>
>> The workaround for this is to disable squelch detect before de-asserting
>> reset, and re-enabling it after the reset de-assert is done. Add a sunxi
>> specific phy function to allow the sunxi-musb glue to do this.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>   drivers/phy/phy-sun4i-usb.c       |  9 +++++++++
>>   include/linux/phy/phy-sun4i-usb.h | 26 ++++++++++++++++++++++++++
>>   2 files changed, 35 insertions(+)
>>   create mode 100644 include/linux/phy/phy-sun4i-usb.h
>>
>> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>> index 221e8ab..01eb08d 100644
>> --- a/drivers/phy/phy-sun4i-usb.c
>> +++ b/drivers/phy/phy-sun4i-usb.c
>> @@ -33,6 +33,7 @@
>>   #include <linux/of_address.h>
>>   #include <linux/of_gpio.h>
>>   #include <linux/phy/phy.h>
>> +#include <linux/phy/phy-sun4i-usb.h>
>>   #include <linux/platform_device.h>
>>   #include <linux/regulator/consumer.h>
>>   #include <linux/reset.h>
>> @@ -75,6 +76,7 @@
>>   #define PHY_OTG_FUNC_EN			0x28
>>   #define PHY_VBUS_DET_EN			0x29
>>   #define PHY_DISCON_TH_SEL		0x2a
>> +#define PHY_SQUELCH_DETECT		0x3c
>>
>>   #define MAX_PHYS			3
>>
>> @@ -322,6 +324,13 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
>>   	return 0;
>>   }
>>
>> +void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
>> +{
>> +	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
>> +
>> +	sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
>> +}
>> +
>>   static struct phy_ops sun4i_usb_phy_ops = {
>>   	.init		= sun4i_usb_phy_init,
>>   	.exit		= sun4i_usb_phy_exit,
>> diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
>> new file mode 100644
>> index 0000000..50aed92
>> --- /dev/null
>> +++ b/include/linux/phy/phy-sun4i-usb.h
>> @@ -0,0 +1,26 @@
>> +/*
>> + * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef PHY_SUN4I_USB_H_
>> +#define PHY_SUN4I_USB_H_
>> +
>> +#include "phy.h"
>> +
>> +/**
>> + * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
>> + * @phy: reference to a sun4i usb phy
>> + * @enabled: wether to enable or disable squelch detect
>> + */
>> +void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled);
>
> breaks build if MUSB=y and SUN41_PHY=m

Ah, good one. So I assume that it is ok to fix this by doing:

--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -66,6 +66,7 @@ config USB_MUSB_SUNXI
         tristate "Allwinner (sunxi)"
         depends on ARCH_SUNXI
         depends on NOP_USB_XCEIV
+ depends on PHY_SUN4I_USB
         select EXTCON
         select GENERIC_PHY
         select SUNXI_SRAM

?

Also I've not heard anything back from you wrt my other musb
sunxi preparation patches and the actual musb-sunxi patch? are
those all ready for merging?

Regards,

Hans