From mboxrd@z Thu Jan 1 00:00:00 1970 From: josh.wu@atmel.com (Josh Wu) Date: Tue, 12 May 2015 11:04:30 +0800 Subject: [PATCH v3 2/3] media: atmel-isi: add runtime pm support In-Reply-To: <1430907955-28665-3-git-send-email-josh.wu@atmel.com> References: <1430907955-28665-1-git-send-email-josh.wu@atmel.com> <1430907955-28665-3-git-send-email-josh.wu@atmel.com> Message-ID: <55516DBE.8020605@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 5/6/2015 6:25 PM, Josh Wu wrote: > The runtime pm resume/suspend will enable/disable pclk (ISI peripheral > clock). > And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need > access ISI registers. > > In the meantime, as clock_start()/clock_stop() is used to control the > mclk not ISI peripheral clock. So move this to start[stop]_streaming() > function. > > Signed-off-by: Josh Wu > --- > > Changes in v3: None > Changes in v2: > - merged v1 two patch into one. > - use runtime_pm_put() instead of runtime_pm_put_sync() > - enable peripheral clock before access ISI registers. > > drivers/media/platform/soc_camera/atmel-isi.c | 51 +++++++++++++++++++++++---- > 1 file changed, 45 insertions(+), 6 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c > index 31254b4..2b05f89 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -20,6 +20,7 @@ > #include > #include > #include > +#include > #include > > #include > @@ -384,6 +385,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) > struct atmel_isi *isi = ici->priv; > int ret; > > + pm_runtime_get_sync(ici->v4l2_dev.dev); > + > /* Reset ISI */ > ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); > if (ret < 0) { > @@ -441,6 +444,8 @@ static void stop_streaming(struct vb2_queue *vq) > ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); > if (ret < 0) > dev_err(icd->parent, "Disable ISI timed out\n"); > + > + pm_runtime_put(ici->v4l2_dev.dev); > } > > static struct vb2_ops isi_video_qops = { > @@ -509,7 +514,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd, > if (mf.code != xlate->code) > return -EINVAL; > > + /* Enable PM and peripheral clock before operate isi registers */ > + pm_runtime_get_sync(ici->v4l2_dev.dev); > + > ret = configure_geometry(isi, pix->width, pix->height, xlate->code); > + > + pm_runtime_put(ici->v4l2_dev.dev); > + > if (ret < 0) > return ret; > > @@ -722,14 +733,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) > struct atmel_isi *isi = ici->priv; > int ret; > > - ret = clk_prepare_enable(isi->pclk); > - if (ret) > - return ret; > - > if (!IS_ERR(isi->mck)) { > ret = clk_prepare_enable(isi->mck); > if (ret) { > - clk_disable_unprepare(isi->pclk); > return ret; > } > } > @@ -744,7 +750,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) > > if (!IS_ERR(isi->mck)) > clk_disable_unprepare(isi->mck); > - clk_disable_unprepare(isi->pclk); > } > > static unsigned int isi_camera_poll(struct file *file, poll_table *pt) > @@ -841,8 +846,13 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd) > > cfg1 |= ISI_CFG1_THMASK_BEATS_16; > > + /* Enable PM and peripheral clock before operate isi registers */ > + pm_runtime_get_sync(ici->v4l2_dev.dev); > + > isi_writel(isi, ISI_CFG1, cfg1); > > + pm_runtime_put(ici->v4l2_dev.dev); > + > return 0; > } > > @@ -1039,6 +1049,9 @@ static int atmel_isi_probe(struct platform_device *pdev) > soc_host->v4l2_dev.dev = &pdev->dev; > soc_host->nr = pdev->id; > > + pm_suspend_ignore_children(&pdev->dev, true); > + pm_runtime_enable(&pdev->dev); > + > if (isi->pdata.asd_sizes) { > soc_host->asd = isi->pdata.asd; > soc_host->asd_sizes = isi->pdata.asd_sizes; > @@ -1052,6 +1065,7 @@ static int atmel_isi_probe(struct platform_device *pdev) > return 0; > > err_register_soc_camera_host: > + pm_runtime_disable(&pdev->dev); This function is missed in atmel_isi_remove(). I'll fix it. Best Regards, Josh Wu > err_req_irq: > err_ioremap: > vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); > @@ -1064,6 +1078,30 @@ err_alloc_ctx: > return ret; > } > > +static int atmel_isi_runtime_suspend(struct device *dev) > +{ > + struct soc_camera_host *soc_host = to_soc_camera_host(dev); > + struct atmel_isi *isi = container_of(soc_host, > + struct atmel_isi, soc_host); > + > + clk_disable_unprepare(isi->pclk); > + > + return 0; > +} > +static int atmel_isi_runtime_resume(struct device *dev) > +{ > + struct soc_camera_host *soc_host = to_soc_camera_host(dev); > + struct atmel_isi *isi = container_of(soc_host, > + struct atmel_isi, soc_host); > + > + return clk_prepare_enable(isi->pclk); > +} > + > +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { > + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, > + atmel_isi_runtime_resume, NULL) > +}; > + > static const struct of_device_id atmel_isi_of_match[] = { > { .compatible = "atmel,at91sam9g45-isi" }, > { } > @@ -1075,6 +1113,7 @@ static struct platform_driver atmel_isi_driver = { > .driver = { > .name = "atmel_isi", > .of_match_table = of_match_ptr(atmel_isi_of_match), > + .pm = &atmel_isi_dev_pm_ops, > }, > }; >