From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
Date: Tue, 12 May 2015 13:10:00 +0300 [thread overview]
Message-ID: <5551D178.3000904@ti.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1505111747460.19833@utopia.booyaka.com>
On 05/11/2015 11:21 PM, Paul Walmsley wrote:
> Hi
>
> On Mon, 11 May 2015, Tero Kristo wrote:
>
>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>> There are still a couple of files under mach-omap2 folder after this
>> set which have either unmet dependencies still (towards PRCM driver)
>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>> Earlier version of this set has been posted back in March (see
>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>> the code is the same except patches 25+ which are new.
>>
>> Overall diffstat for this set:
>> 42 files changed, 2644 insertions(+), 3707 deletions(-)
>>
>> Testing done:
>> am335x-evm : boot
>> am335x-evmsk : boot
>> am3517-evm : boot
>> am37x-evm : boot
>> am43x-epos-evm : boot
>> am437x-gp-evm : boot
>> omap3-beagle-xm : boot
>> omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> am335x-boneblack: boot
>> am335x-bone : boot
>> craneboard : boot
>> dra7xx-evm : boot
>> omap3430-ldp : boot
>> omap3-n900 : boot
>> omap5-uevm : boot
>> omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
>> omap4-panda : boot
>> omap2430-sdp : boot
>> omap3430-sdp : boot
>> omap4-sdp-es23plus: boot
>>
>> Branch info:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: for-4.2/ti-clk-move
>
> I can't replicate your test results. Several Kconfigs fail to build here,
> and many boards don't even boot.
>
> Could you please post a copy of your boot logs?
>
> - Paul
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
Oh hmm, I seem to have introduced a Makefile issue which breaks a couple
of special builds. I just force pushed updated branch.
Here are the boot logs for it, I tried also single-soc builds with
am3/am4/omap2/omap3/omap4/omap5/dra7:
: Board : Boot url
1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
12: craneboard : PASS http://paste.ubuntu.com/11093640/
13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
AM57xx-evm boot fails as it is missing some patches from Nishanth (I
think the UART mux has changed.)
-Tero
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
> Pass (11/13): omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> FAIL ( 9/17): omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig
> Pass ( 8/17): omap2plus_defconfig,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap3_4_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 5/17): 5912osk, 3517evm, am335xbonelt, am335xbone, 2420n800
> Pass ( 6/17): 4430es2panda, 4460pandaes, 37xxevm, 3730beaglexm,
> 3730es12beaglexm, 5430es2uevm
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip retention via dynamic idle:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> PM: chip off via dynamic idle:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1484 -8 0 -1492 multi_v7_defconfig
> -2108 +56 0 -2052 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -6140 +56 -64 -6148 omap2plus_defconfig_cpupm
> -6204 -8 0 -6212 omap2plus_defconfig_no_pm
> -1908 -8 0 -1916 omap2plus_defconfig_omap3_4_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -117644k -13428k . -168k 2420n800 omap2plus_defconfig_n800_only_a
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> -79556k -51516k . -364k am335xbone omap2plus_defconfig_am33xx_only
> -224000k -37120k . -440k am335xbonelt omap2plus_defconfig
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2015-05-12 10:10 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 8:54 [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti Tero Kristo
2015-05-11 8:54 ` [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features Tero Kristo
2015-05-20 1:19 ` Stephen Boyd
2015-05-11 8:54 ` [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk Tero Kristo
2015-05-20 1:20 ` Stephen Boyd
2015-05-20 17:43 ` Tero Kristo
2015-05-20 17:46 ` Tony Lindgren
2015-05-20 18:23 ` Stephen Boyd
2015-05-11 8:54 ` [PATCHv2 03/27] clk: ti: move OMAP4+ " Tero Kristo
2015-05-11 8:54 ` [PATCHv2 04/27] clk: ti: move interface clock " Tero Kristo
2015-05-11 8:54 ` [PATCHv2 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access Tero Kristo
2015-05-11 8:54 ` [PATCHv2 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code Tero Kristo
2015-05-11 8:54 ` [PATCHv2 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file Tero Kristo
2015-05-11 8:54 ` [PATCHv2 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files Tero Kristo
2015-05-11 8:54 ` [PATCHv2 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver Tero Kristo
2015-05-11 8:54 ` [PATCHv2 10/27] clk: ti: move omap2_clk_enable_init_clocks under " Tero Kristo
2015-05-11 8:54 ` [PATCHv2 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param Tero Kristo
2015-05-11 8:54 ` [PATCHv2 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops Tero Kristo
2015-05-11 8:54 ` [PATCHv2 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops Tero Kristo
2015-05-11 8:54 ` [PATCHv2 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver Tero Kristo
2015-05-11 8:54 ` [PATCHv2 15/27] ARM: OMAP3: clock: remove clock3xxx.c file Tero Kristo
2015-05-11 8:54 ` [PATCHv2 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code Tero Kristo
2015-05-11 8:54 ` [PATCHv2 17/27] clk: ti: dflt: move support for default gate clock to clock driver Tero Kristo
2015-05-11 8:54 ` [PATCHv2 18/27] clk: ti: omap2430: move clock support code under " Tero Kristo
2015-05-11 8:54 ` [PATCHv2 19/27] clk: ti: clkdm: move clkdm gate clock support code to " Tero Kristo
2015-05-11 8:54 ` [PATCHv2 20/27] clk: ti: omap34xx: move omap34xx clock type " Tero Kristo
2015-05-11 8:54 ` [PATCHv2 21/27] ARM: OMAP4: clock: remove clock44xx.h header Tero Kristo
2015-05-11 8:54 ` [PATCHv2 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver Tero Kristo
2015-05-11 8:54 ` [PATCHv2 23/27] clk: ti: move some public definitions to private header Tero Kristo
2015-05-11 8:54 ` [PATCHv2 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file Tero Kristo
2015-05-11 8:54 ` [PATCHv2 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration Tero Kristo
2015-05-11 8:54 ` [PATCHv2 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs Tero Kristo
2015-05-11 8:54 ` [PATCHv2 27/27] clk: ti: move low-level access and init code under clock driver Tero Kristo
2015-05-11 20:21 ` [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti Paul Walmsley
2015-05-12 10:10 ` Tero Kristo [this message]
2015-05-12 20:58 ` Paul Walmsley
2015-05-13 6:46 ` Tero Kristo
2015-05-13 14:55 ` Paul Walmsley
2015-05-19 19:23 ` Tero Kristo
2015-05-20 22:40 ` Paul Walmsley
2015-05-21 6:38 ` Tero Kristo
2015-05-21 7:01 ` Nishanth Menon
2015-05-21 18:38 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5551D178.3000904@ti.com \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).