exynos_defconfig: Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3

exynos_defconfig: Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3

[Anand Moon]

Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3.

[PATCH 1/3] ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for odroidxu3 pmw-fan

[Anand Moon]

Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroidxu3.

---
Depends on http://www.spinics.net/lists/arm-kernel/msg412031.html
Tested on OdroidXU3 Board.
---

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index d034c96..3c2784f 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -101,6 +101,7 @@ CONFIG_CHARGER_MAX77693=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y
-- 
1.9.1

[PATCH 2/3] ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for odroidxu3.

[Anand Moon]

Odroidxu3 board support power monitor sensor.

Below is the output of boot log.
[    3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)

ina231-i2c-0-40
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.01 V
power1:      175.00 mW
curr1:        +0.18 A

ina231-i2c-0-41
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.21 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-44
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.02 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-45
Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.04 V
power1:       75.00 mW
curr1:        +0.07 A

---
Tested on OdroidXU3 Board.
---

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 3c2784f..300678a 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -102,6 +102,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_INA2XX=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y
-- 
1.9.1

[PATCH 3/3] ARM: exynos_defconfig: Enable LED's for odroidxu3.

[Anand Moon]

Enable CONFIG_LEDS_GPIO, CONFIG_LEDS_TRIGGERS, CONFIG_LEDS_TRIGGER_HEARTBEAT.

---
Tested on OdroidXU3 Board.
---

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/configs/exynos_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 300678a..21411c5 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -179,6 +179,9 @@ CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_MAX77802=y
-- 
1.9.1

exynos_defconfig: Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3

[Kukjin Kim]

On 05/13/15 00:24, Anand Moon wrote:
> Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3.
> 
Basically, I have no objection on this series so for the test on other
exynos boards. Of course, if any problems on other boards, need to fix
it maybe it will not be happened...anyway, I'll pick them in my tree
once the dependent patch you mentioned is ready.

Thanks,
Kukjin

[PATCH 1/3] ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for odroidxu3 pmw-fan

[Krzysztof Kozlowski]

2015-05-13 0:24 GMT+09:00 Anand Moon <linux.amoon@gmail.com>:
> Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroidxu3.
>
> ---
> Depends on http://www.spinics.net/lists/arm-kernel/msg412031.html
> Tested on OdroidXU3 Board.
> ---
>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>

This is mixed up. Try it yourself:
1. Save the email as mbox.
2. Apply with "git am" to a vanilla tree.
Do you see the Signed-off-by in commit?

Best regards,
Krzysztof

[PATCH 1/3] ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for odroidxu3 pmw-fan

[Anand Moon]

Hi Krzysztof,

Actually It's my mistake. This patch had double signed-off. So I
removed one from the patch.
Do I need to resend this.

-Anand Moon

On 13 May 2015 at 05:16, Krzysztof Kozlowski <k.kozlowski@samsung.com> wrote:
> 2015-05-13 0:24 GMT+09:00 Anand Moon <linux.amoon@gmail.com>:
>> Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroidxu3.
>>
>> ---
>> Depends on http://www.spinics.net/lists/arm-kernel/msg412031.html
>> Tested on OdroidXU3 Board.
>> ---
>>
>> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
>
> This is mixed up. Try it yourself:
> 1. Save the email as mbox.
> 2. Apply with "git am" to a vanilla tree.
> Do you see the Signed-off-by in commit?
>
> Best regards,
> Krzysztof

[PATCH 1/3] ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for odroidxu3 pmw-fan

[Krzysztof Kozlowski]

2015-05-13 10:47 GMT+09:00 Anand Moon <linux.amoon@gmail.com>:
> Hi Krzysztof,
>
> Actually It's my mistake. This patch had double signed-off. So I
> removed one from the patch.
> Do I need to resend this.

Yes, please resend all patches with proper commit message and signed off.

Best regards,
Krzysztof