[PATCH 1/2] ARM: rockchip: fix undefined instruction of reset_ctrl_regs

[zyw@rock-chips.com (Chris Zhong)]

Hi Heiko

On 05/13/2015 06:48 AM, Heiko Stuebner wrote:
> Hi Chris,
>
> Am Dienstag, 12. Mai 2015, 12:00:00 schrieben Sie:
>> We do not need this patch, since we have this one:
>> <https://patchwork.kernel.org/patch/6218791/>
>>
>> these 2 patches fixed a same issue.
> thanks for pointing that out - looks like I didn't need to resurrect the old
> patch then. Just to make sure I don't mess up when removing the obsolete one:
>
> both patches
> 	b403125 ARM: rockchip: fix undefined instruction of reset_ctrl_regs
> 	0ea001d ARM: rockchip: disable dapswjdp during suspend
> actually fix the same issue and
> 	b403125 ARM: rockchip: fix undefined instruction of reset_ctrl_regs
> is the one that should be removed, right?
Yes, this one should be removed.
>
>
> Thanks
> Heiko
>
> [I've readded the lists to give this a bit publicity, so people can see why we
> remove one of the patches again]
>
>
>> On 04/25/2015 08:13 AM, Heiko St?bner wrote:
>>> Sometimes the debug module may not work well after resume, since it has
>>> not been correctly reset when wakeup from suspend. That cause system
>>> crash during reusme, and a 'undefined instruction' is displayed on the
>>> console. Set the GRF_FORCE_JTAG bit of RK3288_GRF_SOC_CON0 can ensure
>>> that debug modul is reset. And we can change the value of
>>> RK3288_GRF_SOC_CON0 back when system resume.
>>>
>>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>> Tested-by: Caesar Wang <wxt@rock-chips.com>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>>
>>> According to discussions, there does not seem a better solution available.
>>> Please also see the potential security implication described in the
>>> comment inline in the code.
>>>
>>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>>> ---
>>>
>>>    arch/arm/mach-rockchip/pm.c | 26 ++++++++++++++++++++++++++
>>>    arch/arm/mach-rockchip/pm.h |  4 ++++
>>>    2 files changed, 30 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
>>> index b0dcbe2..22812fe 100644
>>> --- a/arch/arm/mach-rockchip/pm.c
>>> +++ b/arch/arm/mach-rockchip/pm.c
>>> @@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
>>>
>>>    static phys_addr_t rk3288_bootram_phy;
>>>    
>>>    static struct regmap *pmu_regmap;
>>>
>>> +static struct regmap *grf_regmap;
>>>
>>>    static struct regmap *sgrf_regmap;
>>>    
>>>    static u32 rk3288_pmu_pwr_mode_con;
>>>
>>> +static u32 rk3288_grf_soc_con0;
>>>
>>>    static u32 rk3288_sgrf_soc_con0;
>>>    
>>>    static inline u32 rk3288_l2_config(void)
>>>
>>> @@ -70,12 +72,26 @@ static void rk3288_slp_mode_set(int level)
>>>
>>>    {
>>>    
>>>    	u32 mode_set, mode_set1;
>>>
>>> +	regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
>>> +
>>>
>>>    	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0,
> &rk3288_sgrf_soc_con0);
>>>    	
>>>    	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
>>>    	
>>>    		    &rk3288_pmu_pwr_mode_con);
>>>    	
>>>    	/*
>>>
>>> +	 * We need set this bit GRF_FORCE_JTAG here, for the debug module,
>>> +	 * otherwise, it may become inaccessible after resume.
>>> +	 * This creates a potential security issue, as the sdmmc pins may
>>> +	 * accept jtag data for a short time during resume if no card is
>>> +	 * inserted.
>>> +	 * But this is of course also true for the regular boot, before we
>>> +	 * turn of the jtag/sdmmc autodetect.
>>> +	 */
>>> +	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
>>> +		     GRF_FORCE_JTAG_WRITE);
>>> +
>>> +	/*
>>>
>>>    	 * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
>>>    	 * PCLK_WDT_GATE - disable WDT during suspend.
>>>    	 */
>>>
>>> @@ -135,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
>>>
>>>    	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
>>>    	
>>>    		     rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
>>>    		
>>>    		     | SGRF_FAST_BOOT_EN_WRITE);
>>>
>>> +
>>> +	regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
>>> +		     GRF_FORCE_JTAG_WRITE);
>>>
>>>    }
>>>    
>>>    static int rockchip_lpmode_enter(unsigned long arg)
>>>
>>> @@ -193,6 +212,13 @@ static int rk3288_suspend_init(struct device_node
>>> *np)
>>>
>>>    		return PTR_ERR(pmu_regmap);
>>>    	
>>>    	}
>>>
>>> +	grf_regmap = syscon_regmap_lookup_by_compatible(
>>> +				"rockchip,rk3288-grf");
>>> +	if (IS_ERR(grf_regmap)) {
>>> +		pr_err("%s: could not find grf regmap\n", __func__);
>>> +		return PTR_ERR(pmu_regmap);
>>> +	}
>>> +
>>>
>>>    	sram_np = of_find_compatible_node(NULL, NULL,
>>>    	
>>>    					  "rockchip,rk3288-pmu-sram");
>>>    	
>>>    	if (!sram_np) {
>>>
>>> diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
>>> index 3e8d39c..f8a747b 100644
>>> --- a/arch/arm/mach-rockchip/pm.h
>>> +++ b/arch/arm/mach-rockchip/pm.h
>>> @@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
>>>
>>>    #define RK3288_PMU_WAKEUP_RST_CLR_CNT	0x44
>>>    #define RK3288_PMU_PWRMODE_CON1		0x90
>>>
>>> +#define RK3288_GRF_SOC_CON0		0x244
>>> +#define GRF_FORCE_JTAG			BIT(12)
>>> +#define GRF_FORCE_JTAG_WRITE		BIT(28)
>>> +
>>>
>>>    #define RK3288_SGRF_SOC_CON0		(0x0000)
>>>    #define RK3288_SGRF_FAST_BOOT_ADDR	(0x0120)
>>>    #define SGRF_PCLK_WDT_GATE		BIT(6)
>
>
>