From: jenskuske@gmail.com (Jens Kuske)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/10] pinctrl: sunxi: Add H3 PIO controller support
Date: Mon, 18 May 2015 11:52:29 +0200 [thread overview]
Message-ID: <5559B65D.8020108@gmail.com> (raw)
In-Reply-To: <20150517143014.GH4004@lukather>
Hi,
On 05/17/15 16:30, Maxime Ripard wrote:
> On Fri, May 15, 2015 at 06:38:57PM +0200, Jens Kuske wrote:
>> The H3 uses the same pin controller as previous SoC's from Allwinner.
>> Add support for the pins controlled by the main PIO controller.
>>
>> Signed-off-by: Jens Kuske <jenskuske@gmail.com>
>> ---
>> .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
>> drivers/pinctrl/sunxi/Kconfig | 8 +
>> drivers/pinctrl/sunxi/Makefile | 1 +
>> drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 522 +++++++++++++++++++++
>> 4 files changed, 532 insertions(+)
>> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
>> index fdd8046..c46af8e 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
>> @@ -16,6 +16,7 @@ Required properties:
>> "allwinner,sun7i-a20-pinctrl"
>> "allwinner,sun8i-a23-pinctrl"
>> "allwinner,sun8i-a23-r-pinctrl"
>> + "allwinner,sun8i-h3-pinctrl"
>> - reg: Should contain the register physical address and length for the
>> pin controller.
>>
>> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
>> index 2eb893e..6c1cec5 100644
>> --- a/drivers/pinctrl/sunxi/Kconfig
>> +++ b/drivers/pinctrl/sunxi/Kconfig
>> @@ -43,6 +43,14 @@ config PINCTRL_SUN8I_A23_R
>> depends on RESET_CONTROLLER
>> select PINCTRL_SUNXI_COMMON
>>
>> +config PINCTRL_SUN8I_H3
>> + tristate "Allwinner H3 pinctrl driver"
>> + default MACH_SUN8I
>> + select PINCTRL_SUNXI_COMMON
>
> PINCTRL_SUNXI_COMMON should probably be turned into a tristate as well
Probably, as well as all the other SoC specific drivers. But I think
this should be a separate patch, its independent from this addition.
But given the remove-panic problems I mentioned earlier this whole
pinctrl-as-module topic needs some attention from more experienced devs
I guess, this is beyond my current kernel knowledge.
Regards,
Jens
next prev parent reply other threads:[~2015-05-18 9:52 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 16:38 [PATCH v2 00/10] ARM: sunxi: Introduce Allwinner H3 support Jens Kuske
2015-05-15 16:38 ` [PATCH v2 01/10] Documentation: sunxi: Update Allwinner SoC documentation Jens Kuske
2015-05-17 12:52 ` Maxime Ripard
2015-05-15 16:38 ` [PATCH v2 02/10] clk: sunxi: Add support for multiple parents to gates Jens Kuske
2015-05-17 12:50 ` Maxime Ripard
2015-05-18 9:11 ` Jens Kuske
2015-05-19 7:53 ` Maxime Ripard
2015-05-15 16:38 ` [PATCH v2 03/10] clk: sunxi: Let divs clocks read the base factor clock name from devicetree Jens Kuske
2015-05-17 13:06 ` Maxime Ripard
2015-05-18 9:22 ` Jens Kuske
2015-05-19 8:26 ` Maxime Ripard
[not found] ` <CAGb2v64y8+bdya3N=gK-YEie3A9nVM5nuxRZTVPXYSaN6WzPoQ@mail.gmail.com>
2015-05-18 9:15 ` Jens Kuske
2015-05-18 14:45 ` Chen-Yu Tsai
2015-05-15 16:38 ` [PATCH v2 04/10] pinctrl: sunxi: Prepare for building SoC specific drivers as modules Jens Kuske
2015-05-17 14:19 ` Maxime Ripard
2015-05-18 9:32 ` Jens Kuske
2015-05-19 7:55 ` Maxime Ripard
2015-05-19 8:02 ` Chen-Yu Tsai
2015-05-19 8:16 ` Maxime Ripard
2015-05-19 14:58 ` Linus Walleij
2015-05-15 16:38 ` [PATCH v2 05/10] ARM: sunxi: Introduce Allwinner H3 support Jens Kuske
2015-05-17 14:21 ` Maxime Ripard
2015-05-15 16:38 ` [PATCH v2 06/10] clk: sunxi: Add H3 clocks support Jens Kuske
2015-05-17 14:27 ` Maxime Ripard
2015-05-18 9:45 ` Jens Kuske
2015-05-19 8:50 ` Maxime Ripard
2015-05-15 16:38 ` [PATCH v2 07/10] pinctrl: sunxi: Add H3 PIO controller support Jens Kuske
2015-05-16 15:32 ` Paul Bolle
2015-05-17 14:30 ` Maxime Ripard
2015-05-18 9:52 ` Jens Kuske [this message]
2015-05-19 14:04 ` Linus Walleij
2015-05-19 15:03 ` Maxime Ripard
2015-05-15 16:38 ` [PATCH v2 08/10] reset: sunxi: Add compatible for Allwinner H3 bus resets Jens Kuske
2015-05-17 14:31 ` Maxime Ripard
2015-05-18 9:55 ` Jens Kuske
2015-05-15 16:38 ` [PATCH v2 09/10] ARM: dts: sunxi: Add Allwinner H3 DTSI Jens Kuske
2015-05-15 16:39 ` [PATCH v2 10/10] ARM: dts: sun8i: Add Orange Pi Plus support Jens Kuske
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5559B65D.8020108@gmail.com \
--to=jenskuske@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).