[PATCH v2 0/4] ARM: multi_v7_defconfig: Stuff for Exynos

[PATCH v2 0/4] ARM: multi_v7_defconfig: Stuff for Exynos

[Krzysztof Kozlowski]

Dear Kukjin,


Changes since v1:
=================
1. Select drivers as modules, whenever possible. Suggested by Javier.
2. Patch 2: The I2C_GPIO is already enabled as module.


Description
===========
The patchset enables various config options on multi_v7 config
for Exynos boards.

Arnd suggested [0] that this can go through your tree.

Patchset is rebased on next-20150515 and Javier's patchset [1]
(to avoid conflicts around regulators and clocks).

Please let me know if this should be rebased on other commit.

[0] http://www.spinics.net/lists/kernel/msg1991518.html
[1] http://www.spinics.net/lists/kernel/msg1990767.html


Best regards,
Krzysztof

Krzysztof Kozlowski (4):
  ARM: multi_v7_defconfig: Enable CPU idle for Exynos
  ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos
    boards
  ARM: multi_v7_defconfig: Enable TMU for Exynos
  ARM: multi_v7_defconfig: Enable OHCI on Exynos

 arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

-- 
1.9.1

[PATCH v2 1/4] ARM: multi_v7_defconfig: Enable CPU idle for Exynos

[Krzysztof Kozlowski]

Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos3250, Exynos4210 (coupled), Exynos4x12 and
Exynos5250. Enable it in default configuration to reduce energy
consumption.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 76cbb81cbaa3..d524d2e9633c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -117,6 +117,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_ARM_ZYNQ_CPUIDLE=y
-- 
1.9.1

[PATCH v2 2/4] ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos boards

[Krzysztof Kozlowski]

Enable drivers for PMICs and MUICs present on Exynos-based devices:
 - max14577: charger, fuel gauge (max17040), regulator,
   used on: Gear 1, Gear 2,
 - max77693: charger, fuel gauge (max17042),
   used on: Trats2,
 - s5m/s2mps: RTC, clock,
   used on: Arndale, Arndale Octa, Gear 1, Gear 2

This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d524d2e9633c..f09ae2089284 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -328,6 +328,10 @@ CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_BATTERY_SBS=y
+CONFIG_CHARGER_MAX14577=m
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_TPS65090=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
@@ -357,8 +361,10 @@ CONFIG_MFD_AXP20X=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=m
 CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_MAX77693=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
@@ -374,9 +380,11 @@ CONFIG_REGULATOR_DA9210=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MFD_SYSCON=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_REGULATOR_MAX14577=m
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_MAX8973=y
 CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_MAX77693=m
 CONFIG_REGULATOR_MAX77802=m
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_S2MPS11=y
@@ -529,6 +537,7 @@ CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_S5M=m
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_MV_XOR=y
@@ -558,6 +567,7 @@ CONFIG_QCOM_GSBI=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_MMCC_8960=y
-- 
1.9.1

[PATCH v2 3/4] ARM: multi_v7_defconfig: Enable TMU for Exynos

[Krzysztof Kozlowski]

From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>

Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
allows detection of overheat and handling this gracefully.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f09ae2089284..8fa7171b12f3 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -342,6 +342,7 @@ CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
+CONFIG_EXYNOS_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_DAVINCI_WATCHDOG
-- 
1.9.1

[PATCH v2 3/4] ARM: multi_v7_defconfig: Enable TMU for Exynos

[Kukjin Kim]

On 05/18/15 10:47, Krzysztof Kozlowski wrote:
> From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> 
> Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
> allows detection of overheat and handling this gracefully.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>

Krzysztof, you want to use gmail account on this, you used samsung
accoung on 1st and 2nd patches though?

- Kukjin

> ---
>  arch/arm/configs/multi_v7_defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index f09ae2089284..8fa7171b12f3 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -342,6 +342,7 @@ CONFIG_SENSORS_LM90=y
>  CONFIG_SENSORS_LM95245=y
>  CONFIG_THERMAL=y
>  CONFIG_CPU_THERMAL=y
> +CONFIG_EXYNOS_THERMAL=m
>  CONFIG_RCAR_THERMAL=y
>  CONFIG_ARMADA_THERMAL=y
>  CONFIG_DAVINCI_WATCHDOG

[PATCH v2 3/4] ARM: multi_v7_defconfig: Enable TMU for Exynos

[Krzysztof Kozlowski]

2015-05-19 14:57 GMT+09:00 Kukjin Kim <kgene@kernel.org>:
> On 05/18/15 10:47, Krzysztof Kozlowski wrote:
>> From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>>
>> Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
>> allows detection of overheat and handling this gracefully.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>
> Krzysztof, you want to use gmail account on this, you used samsung
> accoung on 1st and 2nd patches though?

Yes, that is correct. I know that it seems mixed up and sorry for the confusion.

I use the gmail account when I am developing at home to distinguish my
personal and company's rights. So in one patchset I got some old
patches done in company (@samsung.com) and newer one prepared during
my free time.

Best regards,
Krzysztof

[PATCH v2 3/4] ARM: multi_v7_defconfig: Enable TMU for Exynos

[Kukjin Kim]

On 05/19/15 15:01, Krzysztof Kozlowski wrote:
> 2015-05-19 14:57 GMT+09:00 Kukjin Kim <kgene@kernel.org>:
>> On 05/18/15 10:47, Krzysztof Kozlowski wrote:
>>> From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>>>
>>> Enable support for Thermal Monitoring Unit present on Exynos SoCs. This
>>> allows detection of overheat and handling this gracefully.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>>
>> Krzysztof, you want to use gmail account on this, you used samsung
>> accoung on 1st and 2nd patches though?
> 
> Yes, that is correct. I know that it seems mixed up and sorry for the confusion.
> 
OK, I see.

> I use the gmail account when I am developing at home to distinguish my
> personal and company's rights. So in one patchset I got some old
> patches done in company (@samsung.com) and newer one prepared during
> my free time.
> 
I've kept your origin email address. If any problems, please let me know.

Thanks,
Kukjin

[PATCH v2 4/4] ARM: multi_v7_defconfig: Enable OHCI on Exynos

[Krzysztof Kozlowski]

From: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>

Enable the USB OHCI driver for Exynos SoCs: S5PV210, Exynos4 family,
Exynos5250, Exynos5440 and Exynos542x/5800 family.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8fa7171b12f3..fe88429b9279 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -455,6 +455,7 @@ CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_STI=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_EXYNOS=m
 CONFIG_USB_R8A66597_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
-- 
1.9.1

[PATCH v2 0/4] ARM: multi_v7_defconfig: Stuff for Exynos

[Javier Martinez Canillas]

Hello Krzysztof,

On Mon, May 18, 2015 at 3:47 AM, Krzysztof Kozlowski
<k.kozlowski@samsung.com> wrote:
> Dear Kukjin,
>
>
> Changes since v1:
> =================
> 1. Select drivers as modules, whenever possible. Suggested by Javier.
> 2. Patch 2: The I2C_GPIO is already enabled as module.
>
>
> Description
> ===========
> The patchset enables various config options on multi_v7 config
> for Exynos boards.
>
> Arnd suggested [0] that this can go through your tree.
>
> Patchset is rebased on next-20150515 and Javier's patchset [1]
> (to avoid conflicts around regulators and clocks).
>
> Please let me know if this should be rebased on other commit.
>
> [0] http://www.spinics.net/lists/kernel/msg1991518.html
> [1] http://www.spinics.net/lists/kernel/msg1990767.html
>
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (4):
>   ARM: multi_v7_defconfig: Enable CPU idle for Exynos
>   ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos
>     boards
>   ARM: multi_v7_defconfig: Enable TMU for Exynos
>   ARM: multi_v7_defconfig: Enable OHCI on Exynos
>
>  arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>

For all the series:

Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Best regards,
Javier

[PATCH v2 0/4] ARM: multi_v7_defconfig: Stuff for Exynos

[Kukjin Kim]

On 05/18/15 16:03, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On Mon, May 18, 2015 at 3:47 AM, Krzysztof Kozlowski
> <k.kozlowski@samsung.com> wrote:
>> Dear Kukjin,
>>
>>
>> Changes since v1:
>> =================
>> 1. Select drivers as modules, whenever possible. Suggested by Javier.
>> 2. Patch 2: The I2C_GPIO is already enabled as module.
>>
>>
>> Description
>> ===========
>> The patchset enables various config options on multi_v7 config
>> for Exynos boards.
>>
>> Arnd suggested [0] that this can go through your tree.
>>
>> Patchset is rebased on next-20150515 and Javier's patchset [1]
>> (to avoid conflicts around regulators and clocks).
>>
>> Please let me know if this should be rebased on other commit.
>>
>> [0] http://www.spinics.net/lists/kernel/msg1991518.html
>> [1] http://www.spinics.net/lists/kernel/msg1990767.html
>>
>>
>> Best regards,
>> Krzysztof
>>
>> Krzysztof Kozlowski (4):
>>   ARM: multi_v7_defconfig: Enable CPU idle for Exynos
>>   ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos
>>     boards
>>   ARM: multi_v7_defconfig: Enable TMU for Exynos
>>   ARM: multi_v7_defconfig: Enable OHCI on Exynos
>>
>>  arch/arm/configs/multi_v7_defconfig | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
> 
> For all the series:
> 
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> 
Applied, thanks.

- Kukjin