From: julien.grall@citrix.com (Julien Grall)
To: linux-arm-kernel@lists.infradead.org
Subject: [Xen-devel] [RFC 21/23] net/xen-netback: Make it running on 64KB page granularity
Date: Wed, 20 May 2015 15:29:19 +0100 [thread overview]
Message-ID: <555C9A3F.7000207@citrix.com> (raw)
In-Reply-To: <555BBFA7.8030502@citrix.com>
On 19/05/15 23:56, Julien Grall wrote:
>> If you're wgetting from another host, I would suggest wgetting from Dom0
>> to limit the problem between Dom0 and DomU.
>
> Thanks to Wei, I was able to narrow the problem. It looks like the
> problem is not coming from netback but somewhere else down in the
> network stack: wget/ssh between Dom0 64KB and DomU is working fine.
>
> Although, wget/ssh between a guest and an external host doesn't work
> when Dom0 is using 64KB page granularity unless if I start a tcpdump on
> the vif in DOM0. Anyone an idea?
>
> I have no issue to wget/ssh in DOM0 to an external host and the same
> kernel with 4KB page granularity (i.e same source code but rebuilt with
> 4KB) doesn't show any issue with wget/ssh in the guest.
>
> This has been tested on AMD Seattle, the guest kernel is the same on
> every test (4KB page granularity).
>
> I'm planning to give a try tomorrow on X-gene (ARM64 board and I think
> 64KB page granularity is supported) to see if I can reproduce the bug.
It's working on X-gene with the same kernel and configuration. I guess
we can deduce that it's a bug in the AMD network driver.
Regards,
--
Julien Grall
next prev parent reply other threads:[~2015-05-20 14:29 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-14 17:00 [RFC 00/23] arm64: Add support for 64KB page granularity in Xen guest Julien Grall
2015-05-14 17:00 ` [RFC 01/23] xen: Include xen/page.h rather than asm/xen/page.h Julien Grall
2015-05-19 13:50 ` [Xen-devel] " David Vrabel
2015-05-14 17:00 ` [RFC 02/23] xen/xenbus: client: Fix call of virt_to_mfn in xenbus_grant_ring Julien Grall
2015-05-19 13:51 ` [Xen-devel] " David Vrabel
2015-05-19 14:12 ` Julien Grall
2015-05-14 17:00 ` [RFC 03/23] xen/grant-table: Remove unused macro SPP Julien Grall
2015-05-19 13:52 ` [Xen-devel] " David Vrabel
2015-05-14 17:00 ` [RFC 04/23] block/xen-blkfront: Remove unused macro MAXIMUM_OUTSTANDING_BLOCK_REQS Julien Grall
2015-05-20 14:36 ` Roger Pau Monné
2015-05-14 17:00 ` [RFC 05/23] block/xen-blkfront: Remove invalid comment Julien Grall
2015-05-20 14:42 ` Roger Pau Monné
2015-05-14 17:00 ` [RFC 06/23] block/xen-blkback: s/nr_pages/nr_segs/ Julien Grall
2015-05-20 14:54 ` Roger Pau Monné
2015-05-14 17:00 ` [RFC 07/23] net/xen-netfront: Correct printf format in xennet_get_responses Julien Grall
2015-05-19 13:53 ` [Xen-devel] " David Vrabel
2015-05-14 17:00 ` [RFC 08/23] net/xen-netback: Remove unused code in xenvif_rx_action Julien Grall
2015-05-15 0:26 ` Wei Liu
2015-05-14 17:00 ` [RFC 09/23] arm/xen: Drop duplicate define mfn_to_virt Julien Grall
2015-06-23 13:25 ` Stefano Stabellini
2015-06-23 13:53 ` [Xen-devel] " Julien Grall
2015-05-14 17:00 ` [RFC 10/23] xen/biomerge: WORKAROUND always says the biovec are not mergeable Julien Grall
2015-05-15 15:54 ` Boris Ostrovsky
2015-05-19 14:16 ` Julien Grall
2015-05-14 17:00 ` [RFC 11/23] xen: Add Xen specific page definition Julien Grall
2015-05-14 17:00 ` [RFC 12/23] xen: Extend page_to_mfn to take an offset in the page Julien Grall
2015-05-19 13:57 ` [Xen-devel] " David Vrabel
2015-05-19 14:18 ` Julien Grall
2015-05-14 17:00 ` [RFC 13/23] xen/xenbus: Use Xen page definition Julien Grall
2015-05-19 13:59 ` [Xen-devel] " David Vrabel
2015-05-19 14:19 ` Julien Grall
2015-05-14 17:00 ` [RFC 14/23] tty/hvc: xen: Use xen " Julien Grall
2015-05-14 17:00 ` [RFC 15/23] xen/balloon: Don't rely on the page granularity is the same for Xen and Linux Julien Grall
2015-05-19 15:23 ` [Xen-devel] " David Vrabel
2015-05-14 17:00 ` [RFC 16/23] xen/events: fifo: Make it running on 64KB granularity Julien Grall
2015-05-19 15:25 ` [Xen-devel] " David Vrabel
2015-05-14 17:00 ` [RFC 17/23] xen/grant-table: " Julien Grall
2015-05-19 15:27 ` [Xen-devel] " David Vrabel
2015-05-14 17:00 ` [RFC 18/23] block/xen-blkfront: Make it running on 64KB page granularity Julien Grall
2015-05-14 17:00 ` [RFC 19/23] block/xen-blkback: " Julien Grall
2015-05-14 17:01 ` [RFC 20/23] net/xen-netfront: " Julien Grall
2015-05-14 17:01 ` [RFC 21/23] net/xen-netback: " Julien Grall
2015-05-15 2:35 ` Wei Liu
2015-05-15 12:35 ` [Xen-devel] " Julien Grall
2015-05-15 15:31 ` Wei Liu
2015-05-15 15:41 ` Ian Campbell
2015-05-18 12:11 ` Julien Grall
2015-05-18 12:54 ` Wei Liu
2015-05-19 22:56 ` Julien Grall
2015-05-20 8:26 ` Wei Liu
2015-05-20 14:26 ` Julien Grall
2015-05-20 14:29 ` Julien Grall [this message]
2015-05-14 17:01 ` [RFC 22/23] xen/privcmd: Add support for Linux " Julien Grall
2015-05-19 15:39 ` [Xen-devel] " David Vrabel
2015-06-18 17:05 ` Julien Grall
2015-05-14 17:01 ` [RFC 23/23] arm/xen: Add support for " Julien Grall
2015-06-23 14:19 ` Stefano Stabellini
2015-06-23 14:37 ` Julien Grall
2015-06-23 14:49 ` Stefano Stabellini
2015-06-23 15:02 ` [Xen-devel] " Julien Grall
2015-06-23 16:12 ` Stefano Stabellini
2015-05-15 15:45 ` [Xen-devel] [RFC 00/23] arm64: Add support for 64KB page granularity in Xen guest David Vrabel
2015-05-15 15:51 ` Boris Ostrovsky
2015-05-18 12:23 ` Julien Grall
2015-06-23 13:37 ` Stefano Stabellini
2015-06-23 13:41 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=555C9A3F.7000207@citrix.com \
--to=julien.grall@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).