[PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver

[t-kristo@ti.com (Tero Kristo)]

On 05/26/2015 07:32 PM, Tony Lindgren wrote:
> * Tony Lindgren <tony@atomide.com> [150526 09:08]:
>> * Tero Kristo <t-kristo@ti.com> [150525 08:01]:
>>> Hi,
>>>
>>> As requested, posting v3 with somewhat changed diff parameters and
>>> diffstat attached. Just some minor Makefile changes compared to v2,
>>> these were discussed under that set.
>>>
>>> Set has been pushed to:
>>> - tree: https://github.com/t-kristo/linux-pm.git
>>> - branch: for-4.2/ti-clk-move
>>
>> Looks like this causes a build error for at least omap2 only .config:
>>
>> drivers/clk/ti/dpll3xxx.o:(.rodata+0x1c): multiple definition of `clkhwops_omap3_dpll'
>> drivers/clk/ti/dpll.o:(.rodata+0x0): first defined here
>>
>> You may want to create a file selecting ARCH_OMAP2PLUS=y, then point
>> KCONFIG_ALLCONFIG to that file for make randconfig. Then just build
>> randconfigs :) Usually the issues like this are exposed within few
>> randconfig builds, some take longer if the options have dependencies.
>
> Found more similar issues for omap3 only and omap4 only configs:
>
> drivers/built-in.o: In function `omap2_clkops_enable_clkdm':
> omap-gpmc.c:(.text+0x202e0): undefined reference to `ti_clk_get_features'
> drivers/built-in.o: In function `omap2_clkops_disable_clkdm':
> omap-gpmc.c:(.text+0x20374): undefined reference to `ti_clk_get_features'
> drivers/built-in.o: In function `_omap2_dpll_is_in_bypass':
> omap-gpmc.c:(.text+0x21678): undefined reference to `ti_clk_get_features'
> drivers/built-in.o: In function `omap2_dpll_round_rate':
> omap-gpmc.c:(.text+0x218ac): undefined reference to `ti_clk_get_features'
> omap-gpmc.c:(.text+0x218ec): undefined reference to `ti_clk_get_features'
>
> drivers/built-in.o: In function `omap3xxx_dt_clk_init':
> omap-gpmc.c:(.init.text+0x4d60): undefined reference to `omap2_clk_enable_init_clocks'
> arch/arm/mach-omap2/built-in.o: In function `ti_clk_init_features':
>
> arch/arm/mach-omap2/built-in.o: In function `ti_clk_init_features':
> dss-common.c:(.init.text+0x4368): undefined reference to `ti_clk_setup_features'

Argh, that same issue crept back with a merge issue again. I fixed this 
already once.

-Tero